← 034 · 036 · MS 340/360

Stihl 1125 · Section O · 14 of 19 · 36 parts

Carburetor C3A-S19, C3A-S38B

Fits 034.

Parts diagrams →

Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131415161718192202122232425262728292933031456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (36)

PosPart numberDescriptionQty
1 4116 121 5100 Inlet needle 1
2 1125 121 5000 Inlet control lever 1
3 1120 122 3004 Spring 1
4 1120 121 9200 Spindle 1
5 1120 122 6600 Collar screw 1
6 1125 121 5408 Valve jet 0.58 1
6 1125 121 5402 Valve jet 0.60 Fitment / change note → 1
7 1123 121 0700 Cup plug 1
8 1125 129 0901 Gasket 1
9 1125 121 4700 Metering diaphragm 1
10 1125 121 0803 End cover 1
11 4132 122 6600 Collar screw 4
12 1125 122 4200 Clamp 1
13 1123 121 7800 Strainer 1
14 1128 121 4802 Pump diaphragm 1
15 1125 129 0900 Gasket 1
16 1125 121 0802 End cover 1
17 1120 122 7800 Oval head screw 1
18 1125 122 3202 Torsion spring 1
19 1125 120 7101 Throttle shaft with lever 1
20 1125 122 9001 E-clip 1
21 1125 122 7402 Round head screw 1
22 1125 121 3301 Throttle shutter 1
23 1125 122 3203 Torsion spring 1
24 1125 120 7201 Choke shaft with lever 1
25 1125 122 9003 E-clip 1
26 1125 121 2901 Choke shutter 1
27 1125 122 7403 Round head screw 1
28 1125 122 6200 Idle speed adjustment screw 1
29 1120 122 3005 Spring 2
30 1125 122 6701 High speed adjustment screw Fitment / change note → 1
31 1125 122 6801 Low speed adjustment screw Fitment / change note → 1
31 1125 122 6702 High speed adjustment screw Fitment / change note → 1
Not numbered on the diagram — assemblies, kits and options
— 1125 120 0617 NLA Carburetor C3A-S38B Fitment / change note → → replaced by 1125 120 0651 TI 8/2000 1
— 1125 120 0606 Carburetor C3A-S19 Fitment / change note → no longer available from factory 1
— 1128 007 1065 Set of carburetor parts 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Historical fitment · 034

034: C3A-S19 replacement exception in TI32/1996

Use 1125 120 0606 for 034; the shared heading does not make revised 0651 a universal replacement.

  • Remark 2, attached to the new C3A-S31A row, explicitly says: use C3A-S19 carburetor 1125 120 0606 FOR 034. Preserve this model-specific exception to the surrounding 1125 120 0651 revision. The broad 034/036 heading is not permission to substitute the new 0651 on every 034.
  • The bulletin does not say that C3A-S19 receives the revised sealing screws, valve jet or nonremovable fixed jet. Do not transfer C3A-S31A internal calibration into it or assign the printed 0651 introduction serial to this replacement instruction.
  • The exact 034 IPL sheet retains C3A-S19 0606 alongside C3A-S38B 0617, with a separate later TI08/2000 0617-to-0651 annotation. Keep the 1996 exception and later dated conversion annotation distinct; this review neither deletes the later entry nor treats it as unrestricted retroactive permission. No 034 Super, 036 QS or MS successor scope is inferred.
  • Historical TI 32/1996 evidence; not current stock or verified physical interchange. No hardware operation was performed.

Source: TI 32/1996, p. 1 — 034: C3A-S19 replacement exception in TI32/1996.

Part numbers (2)
  • 1125 120 0606 — Carburetor C3A-S19Explicit 034 replacement instruction · 034 per TI32/1996 remark 2
  • 1125 120 0651 — Modified C3A-S31A carburetorSurrounding revision; 034 exception applies · Not admitted here as a universal 034 replacement

Service note · 034

034: C3A-S19 replaced by C3A-S38 with smaller valve jet

0.60→0.58 mm valve jet; high- and low-speed screws also change.

  • C3A-S19 number1125 120 0606 with0.6 mm (0.024 in.) valve jet is replaced by C3A-S38 number1125 120 0617 with0.58 mm (0.023 in.) jet. Both complete carburetors include items1–3. Scan resolves the corrupted extracted designation and number.
  • High-speed screw6701→6702; low-speed screw6801→6802; valve jet5402→5405. Old complete carburetor remains only while factory stocks last (remark1); old individual screws and jet remain spares (remark2). This does not establish unrestricted mixing or a jet-only conversion.
  • No034 serial cutoff is supplied: the printed X 37 391 588 line says FOR036. No carburetor adjustment turns, RPM or jet removal procedure supplied.
  • Later exact034 sheet calls0617 C3A-S38B and lists0.58 mm jet1125 121 5408, not TI5405; source says C3A-S38 without B. Retain the historical configuration and suffix difference. Same bore diameter is not proof5408 replaces5405, and later catalog NLA does not rewrite1997 supply.
  • Historical source guidance and factory supply, not current availability or verified physical interchange. No hardware operation was performed.

Source: TI 33/1997, p. 1 — Section1.1 and034 table, all component rows, remarks and restricted serial line.

Part numbers (8)
  • 1125 120 0606 — Carburetor C3A-S19Old complete assembly; stock exhaustion · Only the exact model/configuration and restrictions of 1997-33
  • 1125 120 0617 — Carburetor C3A-S38New complete assembly · Only the exact model/configuration and restrictions of 1997-33
  • 1125 122 6701 — Original high-speed screwRemains spare · Only the exact model/configuration and restrictions of 1997-33
  • 1125 122 6702 — New high-speed screwItem1 · Only the exact model/configuration and restrictions of 1997-33
  • 1125 122 6801 — Original low-speed screwRemains spare · Only the exact model/configuration and restrictions of 1997-33
  • 1125 122 6802 — New low-speed screwItem2 · Only the exact model/configuration and restrictions of 1997-33
  • 1125 121 5402 — Original valve jet0.60 mmRemains spare; item3 · Only the exact model/configuration and restrictions of 1997-33
  • 1125 121 5405 — New valve jet0.58 mmItem3 · Only the exact model/configuration and restrictions of 1997-33

Wrong number or missing part for the 034? Report a correction →