← 034 · 036 · MS 340/360

Stihl 1125 · Section C · 1 of 8 · 16 parts

Oil pump

Fits 036 QS.

Parts diagrams →

Historical fitment & changes (3) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
11011121314233456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (16)

PosPart numberDescriptionQty
1 1125 640 3001 Pump housing 1
2 not sold separately Oil hose 74 mm / 2.9'' not available as a separate item 1
3 0000 958 0611 Washer 2
4 0000 997 0629 Compression spring 1
5 1125 647 0602 Pump piston 1
6 1125 647 7002 Plug 1
7 9646 945 0160 O-ring 4x2 2
8 1128 647 4806 Control bolt 1
9 9380 620 1090 Roll pin 2x10 1
10 9022 313 0660 Spline screw IS-M4x12 2
11 1125 647 7800 Washer 1
12 1125 640 7110 Worm 1
13 1125 647 2400 Spring 1
14 0000 993 0510 Ring 1
Not numbered on the diagram — assemblies, kits and options
— 1125 640 3201 Oil pump 1
— 1124 007 1010 Oil hose kit 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · 036 QS

036 QS modular brake and oil pump: changed hardware, separate IPL

6.0 kg versus 5.7 kg for 036; brake-band position controls oil pump.

  • Page 3 says specifications match the 036 except weight rises from 5.7 kg (12.6 lb) to 6.0 kg (13.2 lb). No weighing configuration is given here; do not invent dry/wet or bar-and-chain inclusion. No other standard-036 numerical specification is supplied by this TI.
  • The six listed changes are: oil-pump housing supports braking-system parts in modular construction; bigger chain-sprocket bearing; improved dust seal; ceramic-coated brake band; oil pump controlled by brake-band position; and a crankshaft-mounted cam engaging the chain brake. No bearing dimensions, coating specification or retrofit compatibility are established.
  • Page 6 says a SEPARATE illustrated parts list exists for 036 QS. The retained 2012 catalog has exact 036 QS sheets for oil pump, clutch/chain brake and throttle control; this establishes navigation, not that every 2012 revision was present in 1995. Use original replacement parts per the latest parts list, as page 4 directs. The “Last Technical Information on model 036” field on page 6 is BLANK; no prior issue number is reconstructed.
  • Historical TI evidence, not current supply, verified physical interchange or a complete repair procedure. No hardware operation was performed. Exact-model IPL links identify components only; their later edition is not backdated to 1995.

Source: TI 45/1995, p. 3 · TI 45/1995, p. 4 · TI 45/1995, p. 6 — 036 QS modular brake and oil pump: changed hardware, separate IPL.

No additional parts-table entry added.

Service note · 036 QS

036 QS four torque rows: Loctite 648 and printed Loctite 242 labels

Row-specific Nm/lbf.ft values; same adhesive number has a conflicting name in TI43.

  • Page 5 gives four rows: spline screw IS-DG 4×12, oil pump/crankcase — 3.5 Nm (2.6 lbf.ft), NO adhesive footnote; spline screw IS-DG 5×30, printed “Handschutzhebel/hand guard” — 7.0 Nm (5.2 lbf.ft), remark 1; hex-head screw M6×20, hand guard/crankcase — 6.5 Nm (4.8 lbf.ft), remark 2; pin M7×0.75, pin/oil pump — 7.0 Nm (5.2 lbf.ft), remark 2. Preserve the printed mixed-language joint label without inventing a different attachment.
  • Remark 1 requires adhesive 0786 111 1117, LOCTITE 648, on the IS-DG 5×30 joint. Remark 2 requires 0786 111 1101, printed LOCTITE 242, on BOTH the M6×20 joint and M7×0.75 pin. The pin inherits remark 2 despite the remark’s generic “screw” wording. No adhesive requirement is attached to IS-DG 4×12.
  • CONFLICT RETAINED: TI 45/1995 calls 0786 111 1101 Loctite 242, while TI 43/1995 pages 11–12 call the same number Loctite 243. No equivalence, reformulation or correction has been established; neither source label is silently changed and this is not a substitute-product approval.
  • “All other parts as 036” is a cross-reference, not permission to transfer these four torques to all joints. The available 1999-10 service manual is later than this 1995 TI; no later torque values are imported or backdated here.
  • Historical TI evidence, not current supply, verified physical interchange or a complete repair procedure. No hardware operation was performed. Exact-model IPL links identify components only; their later edition is not backdated to 1995.

Source: TI 45/1995, p. 5 — 036 QS four torque rows: Loctite 648 and printed Loctite 242 labels.

Part numbers (2)
  • 0786 111 1117 — Loctite 648 adhesivespecified · 036 QS IS-DG5×30 hand-guard joint; remark 1
  • 0786 111 1101 — Printed Loctite 242 adhesive; conflicting TI43 label retainedspecified · 036 QS M6×20 hand-guard/crankcase and M7×0.75 pin/oil-pump joints; remark 2

Service note · 036 QS

036 QS DG thread preservation and adhesive heating caution

Find the existing thread counterclockwise before tightening clockwise with a torque wrench.

  • DG screws form a permanent thread in polymer on first insertion. The source’s repeated-removal claim is conditional on observing the SPECIFIED TORQUE with a TORQUE WRENCH, not proof a damaged thread can be reused.
  • For an existing DG thread: place screw in the hole, rotate COUNTERCLOCKWISE until it drops slightly, then tighten CLOCKWISE to the specified torque. This engages the existing thread instead of cutting a new one and weakening the assembly.
  • Adhesive-secured screws are easier to release after heating the adhesive with a hot-air blower (hair dryer). The explicit caution is NOT TO OVERHEAT POLYMER COMPONENTS. No temperature, exposure duration or open-flame method is specified.
  • Historical TI evidence, not current supply, verified physical interchange or a complete repair procedure. No hardware operation was performed. Exact-model IPL links identify components only; their later edition is not backdated to 1995.

Source: TI 45/1995, p. 5 — 036 QS DG thread preservation and adhesive heating caution.

No additional parts-table entry added.

Wrong number or missing part for the 036 QS? Report a correction →