← 034 · 036 · MS 340/360

Stihl 1125 · Section O · 6 of 8 · 39 parts

Carburetor C3A-S31E

Fits 036 QS.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131415161718192202122232425272829293303132333435363738456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (39)

PosPart numberDescriptionQty
1 1120 122 7800 Oval head screw 1
2 1125 121 0802 End cover 1
3 1125 129 0900 Gasket 1
4 1128 121 4802 Pump diaphragm 1
5 1123 121 7800 Strainer 1
6 4116 121 5100 Inlet needle 1
7 1120 122 3004 Spring 1
8 1125 121 5000 Inlet control lever 1
9 1125 129 0901 Gasket 1
10 1125 121 4700 Metering diaphragm 1
11 1120 121 9200 Spindle 1
12 1120 122 6600 Collar screw 1
13 1125 121 5408 Valve jet 0.58 1
14 1123 121 0700 Cup plug 1
15 1125 121 0804 End cover 1
16 1120 122 6601 Collar screw 4
17 1125 122 4200 Clamp 1
18 1125 122 3202 Torsion spring 1
19 1125 120 7101 Throttle shaft with lever 1
20 1125 122 9001 E-clip 1
21 1125 121 3301 Throttle shutter 1
22 1125 122 7402 Round head screw 1
23 1125 122 3203 Torsion spring 1
24 1125 120 7201 Choke shaft with lever 1
25 1125 122 9003 E-clip 1
27 1125 122 7403 Round head screw 1
28 1125 122 6200 Idle speed adjustment screw 1
29 1120 122 3005 Spring 2
30 1125 122 6702 High speed adjustment screw 1
31 1125 122 6802 Low speed adjustment screw 1
32 1125 121 5409 Valve jet 0.56 option 1
33 1125 121 5402 Valve jet 0.60 1
34 1125 122 6701 High speed adjustment screw 1
35 1125 122 6801 Low speed adjustment screw 1
36 1125 121 5404 Valve jet Fitment / change note → 1
37 1125 121 0803 End cover 1
38 4132 122 6600 Collar screw 4
Not numbered on the diagram — assemblies, kits and options
— 1125 120 0613 Carburetor C3A-S31E 1
— 1128 007 1065 Set of carburetor parts 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · 036 / 036 QS

036 / 036 QS: C3A-S31A valve jet and unchanged order number

0.64 mm → 0.60 mm valve jet; earlier source identity conflict remains unresolved.

  • C3A-S31 becomes C3A-S31A while carburetor order number 1125 120 0651 stays unchanged. Each of the two listed carburetor families receives valve jet 1125 121 5404 (diameter 0.60 mm) instead of 1125 121 5403 (diameter 0.64 mm). All other parts remain as before in THIS bulletin; the dashes separate old/new type rows, not missing order numbers.
  • Modification introduction is IN PROGRESS. No machine-number cutoff is printed; do not reuse the earlier TI32/1996 serial as this changeover. Remark 1 says only the modified carburetor version is factory supplied; remark 2 says the original valve jet is no longer factory supplied. These are historical supply statements, not current stock or blanket retrofit approval.
  • SOURCE CONFLICT RETAINED: the already-reviewed TI32/1996 describes 1125 120 0651 as C3A-S26 → C3A-S31A and valve jet 1125 121 5402 → 1125 121 5404, extending its changes to VH assembly 1125 120 0609. TI06/1997 instead prints C3A-S31 → C3A-S31A and 1125 121 5403 → 1125 121 5404. Both accounts are preserved; whether they describe market/version differences or an error is unresolved. Do not silently rewrite either original identity or infer a universal calibration sequence.
  • The header names 036 and 036 QS, series 1125. Applicability remains conditional on the named carburetor, not every carburetor fitted to either saw. No 034, MS360 or other successor applicability is inferred. Later IPL C3A-S27D and C3A-S31E/C3A-S65 labels are discovery context, not proof of identical internal calibration or a substitute for identifying the fitted version.
  • Historical TI06/1997 evidence; dimensions describe the valve jet, not the nonremovable part-load fixed jet in TI32. No adjustment settings, drilling instruction or tested physical interchange are established. No hardware operation was performed.

Source: TI 6/1997, p. 1 — C3A-S31 to C3A-S31A unchanged-number valve-jet revision.

Referenced bulletin evidence: TI 32/1996, p. 1 — 036: C3A-S26 to C3A-S31A calibration at X 35 047 484.

Part numbers (3)
  • 1125 120 0651 — Carburetor C3A-S31 / C3A-S31AUnchanged assembly number · TI06/1997 C3A-S31/C3A-S31A; identify actual version
  • 1125 121 5403 — Original valve jet, diameter 0.64 mmOriginal version · TI06/1997 C3A-S31/C3A-S31A; identify actual version
  • 1125 121 5404 — Modified valve jet, diameter 0.60 mmNew version · TI06/1997 C3A-S31/C3A-S31A; identify actual version

Wrong number or missing part for the 036 QS? Report a correction →