← 020 T · MS 200 · MS 200 T

Stihl 1129 · Section F · 6 of 12 · 45 parts

Ignition system

Fits 020.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
11010111213141415151617181922021222324252627282933032333435363738394404142434445567899
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (45)

PosPart numberDescriptionQty
1 0000 400 1306 Ignition module Fitment / change note → 1
2 0000 448 1203 Lead retainer 1
3 0000 448 1200 Lead retainer 1
4 9291 021 0121 Washer 5.3 2
5 9022 371 0710 Spline screw IS-M4x20 2
6 1114 440 1104 Short circuit wire 1
7 0751 030 8470 Grommet no longer available from factory 1
8 0751 030 8958 Terminal socket 4.8-1 no longer available from factory 1
9 1114 442 7000 Contact sleeve 1
10 1114 405 0805 Grommet 1
11 1114 404 3200 Ignition coil 1
12 not sold separately Ignition lead 230 mm not available as a separate item 1
13 1114 440 1106 Short circuit wire 1
14 9021 319 0670 Pan head screw M4x14 1
15 1114 448 1200 Lead retainer 1
16 1113 405 8800 Hose 1
17 1114 400 1005 Trigger unit 1
18 9062 319 0660 Countersunk screw M4x12 2
19 1114 405 1800 Sleeve 2
20 9294 021 0100 Washer 4.3 2
21 9210 260 0600 Hexagon nut M4 2
22 9041 216 0300 Pan head screw M3x4 1
23 1114 405 1900 Bracket 1
24 9048 319 0710 Pan head screw M4x20 2
25 1114 430 0200 Stop switch 1
26 9039 488 0340 Self-tapping screw M3x8 1
27 0000 989 0801 Grommet 1
28 1113 405 8800 Hose 1
29 0000 998 0603 Torsion spring → replaced by 0000 998 0604 TI 30/1995 1
30 1106 405 1000 Spark plug boot → replaced by 1128 405 1000, 1128 405 1000 TI 30/1995 1
32 0000 998 1104 Torsion spring 2
33 1114 195 7200 Pawl 2
34 1114 195 7800 Pin 2
35 9210 261 1140 Hexagon nut M8x1 1
36 1114 141 2200 Manifold 1
37 1114 141 1805 Sleeve 1
38 9771 021 2580 Hose clip Ø 34x7 1
39 1114 120 2201 Flange 1
40 0000 953 0806 Stud M5x43 2
41 0000 988 5204 Connector 1
42 1114 120 0604 Carburetor WT-15A 1
43 1119 141 8600 Impulse hose 106 mm / 4.2'' 1
44 9210 260 0700 Hexagon nut M5 2
45 1114 182 1502 Throttle rod 1
Not numbered on the diagram — assemblies, kits and options
— 0000 405 0600 NLA Ignition lead 1 m not illustratedoption 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Historical fitment · 020 / 020 T

020 / 020 T: series 1129 replacement ignition assignment

0000 400 1306 and the listed flywheel pairing for series 1129; 295 mm ignition lead.

  • Listed configuration: 0000 400 1306 with flywheel 1129 400 1201.
  • Printed ignition-lead length: 295 mm (11 5/8 in). Preserve the printed metric and inch values; no rounding correction is inferred.
  • TI01/1999 lists replacement combinations for the then-current machines, not every earlier configuration. Older machines are referred to Spare Parts for Previous Models in their own illustrated parts lists; no serial cutoff is supplied here.
  • Use only the listed ignition-module/flywheel combinations. The source warns that incorrect combinations can cause excessive RPM or running in reverse; sharing a module number does not make all flywheels interchangeable.
  • Universal replacement modules may differ from production modules in maker, shape and part number. The source describes installation/function compatibility within its assignments, not universal compatibility or a project hardware test.
  • Some replacement modules require shortening the ignition lead and/or short-circuit wire and crimping a different short-circuit connector. The table gives ignition-lead lengths only; it supplies neither a short-circuit-wire length nor a connector part number. Do not infer that every row needs modification.
  • Only the named models and printed series are covered. A shared IPL sheet does not extend this assignment to unnamed models or modern MS equivalents. This 1999 USA bulletin is historical guidance, not current availability.
  • The 020 name appears in two distinct series: 1114 uses 0000 400 1302 / 1114 400 1211 at 230 mm; 1129 uses 0000 400 1306 / 1129 400 1201 at 295 mm. Do not choose by the model name alone.
  • The source explicitly includes 020 T. The retained ignition sheet is labeled 020, so this note is attached to the exact series-1129 020 sheet; no MS 200/T sheet is substituted.

Source: TI 1/1999, p. 1 · TI 1/1999, p. 2 — 1.1 general restrictions and 1.2.1 chainsaw assignments.

Part numbers (2)
  • 0000 400 1306 — Replacement ignition moduleAssigned replacement · 020 / 020 T, series 1129, only with the listed flywheel branch
  • 1129 400 1201 — Listed configuration flywheelRequired pairing · 020 / 020 T, series 1129; listed configuration only

Wrong number or missing part for the 020? Report a correction →