← MS 192 · 193 · 194

Stihl 1137 · Section D · 4 of 9 · 19 parts

Chain sprocket cover

Fits MS 192 C.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110111213141516171823456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (19)

PosPart numberDescriptionQty
1 1137 640 1701 Chain sprocket cover 1
2 1120 162 5200 Pin 1
3 9378 543 2700 Notched pin 5x30 1
4 1129 640 5000 Insert 1
5 1128 160 5000 Lever 1
6 9460 624 0400 E-clip 4 1
7 1129 162 7800 Flat spring 1
8 1137 160 5502 Tension spring Fitment / change note → 1
9 1137 162 6600 Limit stop Fitment / change note → 1
10 1123 160 5400 Brake band 1
11 1137 648 7700 Cover 1
12 9074 477 2995 Pan head self-tapping screw IS-P4x12 2
13 1123 648 6600 Bumper strip 1
14 1137 792 9102 Hand guard 1
15 0000 967 3630 Instruction label 1
16 0000 967 4003 Warning pictogram MS 1
17 0000 955 0801 Hexagon nut M8 1
18 0000 967 4055 Warning Spark arresting screen 1
Not numbered on the diagram — assemblies, kits and options
— 1137 640 1706 Chain sprocket cover 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · MS 192 C / MS 192 T / MS 192 TC-E

MS 192: chain-brake spring with preformed limit stop

The new spring includes a limit stop instead of the surrounding hose.

  • Previous hose 0000 937 4019 surrounds tension spring 1137 160 5500. It is replaced by preformed limit stop 1137 162 6600, inserted BETWEEN THE PLASTIC RIBS in the chain-sprocket cover. Original figures217TI042/043 show removal of the hose and the stop’s separate position below the spring; it is not another sleeve threaded onto the spring.
  • Spring 1137 160 5500 INCLUDING HOSE is eliminated and replaced by spring 1137 160 5502 INCLUDING LIMIT STOP 1137 162 6600. The summary marks old spring and hose no longer factory available.
  • No retrofit footnote, spring dimension, brake-band setting or test specification is printed. Replacement wording is retained without inventing a universal interchange claim; no changes are assigned to MS 193 or MS 194 just because those IPLs share series 1137.
  • Cover names MS 192 C, MS 192 T and MS 192 TC-E, series 1137. Equipment-specific headings and section 3’s narrower model list control applicability. Catalog TC is NOT silently aliased to TC-E; shared-sheet navigation does not expand the source roster to MS 193/194.
  • Historical English-USA 2008 source, not present-day stock or approval for unlisted variants. No numeric serial cutoff is supplied. No physical interchange test was performed.

Source: TI 21/2008, p. 1 · TI 21/2008, p. 2 — MS 192: chain-brake spring with preformed limit stop.

Part numbers (4)
  • 0000 937 4019 — Hose around tension springPrevious · MS 192 C / MS 192 T / MS 192 TC-E; source restrictions apply
  • 1137 162 6600 — Preformed limit stopNew; between cover ribs · MS 192 C / MS 192 T / MS 192 TC-E; source restrictions apply
  • 1137 160 5500 — Tension spring including hosePrevious · MS 192 C / MS 192 T / MS 192 TC-E; source restrictions apply
  • 1137 160 5502 — Tension spring including limit stopNew · MS 192 C / MS 192 T / MS 192 TC-E; source restrictions apply

Wrong number or missing part for the MS 192 C? Report a correction →