← MS 192 · 193 · 194

Stihl 1137 · Section E · 5 of 9 · 17 parts

Rewind starter

Fits MS 192 C.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
11011121314151623456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (17)

PosPart numberDescriptionQty
1 1137 080 1801 Fan housing 1
2 1110 084 9102 Bushing 1
3 9104 003 2960 Self-tapping screw P4x10 Fitment / change note → 1
4 1123 190 0600 Rewind spring 1
5 1137 190 1000 Rope rotor 1
6 1137 195 3501 Spring 1
7 0000 958 1020 Washer 1
8 not sold separately Carrier not available as a separate item 1
9 1123 195 7200 Pawl 2
10 0000 958 0923 Washer 1
11 1128 195 3500 Spring 1
12 1137 084 7800 Segment 1
13 1121 195 3400 Starter grip 1
14 0000 195 8204 Starter rope Ø 2.7x800 mm 1
15 1137 967 1501 Model plate MS 192 C 1
16 9074 477 4130 Pan head self-tapping screw IS-P5x16 4
Not numbered on the diagram — assemblies, kits and options
— 1137 080 2105 Fan housing with rewind starter 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · MS 192 C / MS 192 T / MS 192 TC-E

MS 192: standard starter keeps both housing numbers

The non-Easy2Start revision adds a screw hole without the rotor conversion.

  • WITHOUT EASY2START, section 2.4: bare fan housing 1137 080 1800 gains a hole and self-tapping P4x10 screw 9104 003 2960; its number remains 1137 080 1800. Only the modified housing is factory supplied.
  • Complete standard fan housing WITH REWIND STARTER 1137 080 2100 likewise retains its number; only the modified version is factory supplied. These unchanged numbers do not mean unchanged physical parts.
  • The TI does NOT prescribe adding Easy2Start rotor 1137 190 1000 to the standard starter, and gives no drilling location, torque or explicit retrofit footnote. The standard1800/2100 pair is separate from Easy2Start1801/2105.
  • Cover names MS 192 C, MS 192 T and MS 192 TC-E, series 1137. Equipment-specific headings and section 3’s narrower model list control applicability. Catalog TC is NOT silently aliased to TC-E; shared-sheet navigation does not expand the source roster to MS 193/194.
  • Historical English-USA 2008 source, not present-day stock or approval for unlisted variants. No numeric serial cutoff is supplied. No physical interchange test was performed.

Source: TI 21/2008, p. 3 — MS 192: standard starter keeps both housing numbers.

Part numbers (3)
  • 1137 080 1800 — Standard fan housingSame number; hole and screw added · MS 192 C / MS 192 T / MS 192 TC-E; source restrictions apply
  • 9104 003 2960 — Self-tapping screw P4x10Included with revised housing · MS 192 C / MS 192 T / MS 192 TC-E; source restrictions apply
  • 1137 080 2100 — Fan housing with standard starterSame number; modified supply · MS 192 C / MS 192 T / MS 192 TC-E; source restrictions apply

Wrong number or missing part for the MS 192 C? Report a correction →