← MS 362 · 311/391 · MS 400

Stihl 1140 · Assembly · 12 of 29 · 34 parts

Crankcase

Fits MS 362.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
11111011111111111112121314151617181922220212122222323242425262627272828292933333333303132333334444444444445556666777888899
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (34)

PosPart numberDescriptionQty
1 1140 020 2651 Crankcase, fan side 1
2 1140 020 2612 Crankcase, fan side 1
3 1140 007 1009 Ball bearing kit 1
4 9503 003 0354 Grooved ball bearing DIN625-6202. 1
5 0000 988 8600 Sleeve 2
6 9371 470 1058 Cylindrical pin 1,8x19 2
7 0000 963 0902 Bushing 2
8 9640 003 1560 Oil seal 15x22x4 1
9 0000 350 0533 Filler cap 1
10 9645 948 7734 O-ring 25x3.5 1
11 9022 500 1051 Spline screw IS-M5x27 From machine 108 604 182 TI 27/2015 TI 26/2015 5
12 9022 371 1050 Spline screw IS-M5x25 5
13 1140 020 2950 Crankcase 1
14 1140 020 2952 Crankcase 1
15 1140 020 2951 Crankcase 1
16 1140 020 2904 Crankcase 1
17 1140 020 2922 Crankcase 1
18 1140 020 2912 Crankcase 1
19 1140 020 2932 Crankcase 1
20 1140 007 1010 Ball bearing kit 1
21 9523 003 4278 Grooved ball bearing 5x35x13 1
22 9640 003 1600 Oil seal 15x29.6x4 1
23 1128 640 9100 Valve 1
24 1120 162 5200 Pin 1
25 1121 162 5205 Pin 1
26 1121 162 5200 Pin 1
27 0000 974 1200 Notched pin 2.6x8 1
28 9371 470 1058 Cylindrical pin 1,8x19 1
29 0000 963 0902 Bushing 1
30 0000 664 2406 Collar screw M8 2
31 1138 664 2400 Collar screw 2
32 0000 664 2405 Collar screw M8 1
33 1121 162 5200 Pin 1
34 1125 162 5209 Pin 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · MS 361 / MS 362 / MS 440 / MS 441 / MS 460 / MS 650 / MS 660 / MS 880

MS 361, MS 362, MS 440, MS 441, MS 460, MS 650, MS 660, MS 880: magnesium stud adhesive changes to Loctite 270

Metric-thread crankcase studs: Loctite 243 (USA 242) → Loctite 270; not polymer housings.

  • Exact listed magnesium-crankcase models: MS 361, MS 362, MS 440, MS 441, MS 460, MS 650, MS 660, MS 880. Their metric-thread studs change from Loctite 243 (USA: Loctite 242) to Loctite 270. No stud part number, serial changeover, cure time or torque is specified here.
  • Before stud reassembly, clean BOTH threads: insert the tap into the internal thread BY HAND, then blow out the threaded hole; brush off the external stud thread. Coat the cleaned stud with Loctite 270. This thread-cleaning instruction is not permission to enlarge the polymer repair-stud hole.
  • Loctite is NOT used for studs in polymer engine housings. The magnesium adhesive change does not override the separate polymer repair restrictions or give these models permission to use the oversized polymer repair studs.
  • The repeated words engine housings at the end of page3 are present in the original scan; they add no second instruction and are not silently corrected in the retained source.
  • Historical English TI29/2011. Only the printed model and material scope is admitted; no unlisted variants or predecessor models are inferred. No physical interchange test was performed.

Source: TI 29/2011, p. 3 — MS 361, MS 362, MS 440, MS 441, MS 460, MS 650, MS 660, MS 880: magnesium stud adhesive changes to Loctite 270.

No additional parts-table entry added.

Wrong number or missing part for the MS 362? Report a correction →