← E140/E160/E180 · MSE 140/141/160/180/200

Stihl 1208 · Section D · 4 of 4 · 32 parts

Quick chain tensioner

Fits E 140, E 160, E 180 C.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
11011121314151617181922021223456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (32)

PosPart numberDescriptionQty
1 1208 640 1720 Chain sprocket cover 1
2 0000 961 1409 Ring 1
3 1208 640 1725 Chain sprocket cover 1
4 1208 648 3800 Cover plate 1
5 1123 648 2202 NLA Adjusting wheel 1
6 9104 003 8600 NLA Self-tapping screw P3x10 1
7 1121 660 1000 Wing nut 1
8 1123 660 3001 NLA Tensioning gear 1
9 9041 319 0600 NLA Pan head screw M4x5 1
10 1123 021 2800 Insert 1
11 1123 664 0501 Bumper spike 1
12 9074 478 4135 Pan head self-tapping screw IS-P5x20 2
13 9210 260 1100 Hexagon nut M8 1
14 1208 792 9100 Hand guard 1
15 9099 021 4980 Self-tapping screw 6.3x32 1
16 1208 791 1500 Front handle 1
17 9074 478 3475 Pan head self-tapping screw IS-P4.5x25 3
18 1208 967 1800 Rating plate 230 V 1
18 1208 967 1805 NLA Rating plate 230 V 1
18 1208 967 1810 Rating plate 230 V 1
18 1208 967 1801 Rating plate 240 V 1
18 1208 967 1802 NLA Rating plate 240 V 1
18 1208 967 1803 Rating plate 240 V 1
18 1208 967 1820 Rating plate 120 V 1
18 1208 967 1825 Rating plate 120 V 1
18 1208 967 1830 Rating plate 120 V 1
19 1206 967 3505 Warning pictogram MSE 1
19 0000 967 3736 Warning pictogram MSE 1
20 1129 890 3401 Combination wrench 1
21 0000 792 9128 Chain scabbard 1
22 0812 370 1000 Screwdriver T27x120x70 option 1
Not numbered on the diagram — assemblies, kits and options
— 1208 007 1000 Quick tensioner parts option 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · E 180 C

E 180 C: 120 V / 60 Hz specifications and cutting attachment

The complete printed column retains load conditions, measurement location and original units.

  • Electrical data: motor 1.8 kW; rated voltage 120 V; frequency 60 Hz; protection class printed “Type II”; enclosure IP 20. Current drawn at NO LOAD WITHOUT CUTTING ATTACHMENT: 8.2 A. The listed 120 V fuse is 15 A; no alternate-voltage rating or loaded-current limit is inferred.
  • Speeds WITH CUTTING ATTACHMENT: 5000 rpm on load and 6800 rpm at no load. Footnote 1 identifies CHAIN-SPROCKET speed, NOT rotor speed or chain linear velocity. Do not mix these speed conditions with the attachment-free current measurement.
  • Sound-pressure level Lp, WITHOUT LOAD, to the printed ANSI B175.3 reference: 68 dB(A) at 50 ft and 93 dB(A) at the operator’s ear. These are pressure levels at two locations, not sound-power values or exposure guarantees; the printed standard identifier is retained without silently correcting it.
  • Oil tank capacity 6.8 oz (source does not further qualify the ounce convention). Weight 7.7 lb WITHOUT CUTTING ATTACHMENT AND WITHOUT CONNECTING CORD. Tensioning: quick chain tensioner. Connecting-cord length for 120 V: 11.8 in. These are historical printed values, not measurements of an owner’s saw.
  • Section 4 cutting attachment: 3/8 in Picco Micro 1; guide bar/cutting length Rollomatic 3/8 P / 14 in. No drive-link count, groove gauge, mount code, chain order number or universal bar-compatibility list is supplied; do not infer them from the trade names.
  • TI02/1997 provides no serial cutoff. Shared catalog sheets do not extend this note to unnamed models, MSE successors or other voltage versions. No hardware operation was performed.

Source: TI 2/1997, p. 4 — E 180 C: 120 V / 60 Hz specifications and cutting attachment.

No additional parts-table entry added.

Wrong number or missing part for the E 140, E 160, E 180 C? Report a correction →