Stihl 4116 · Section J · 8 of 12 · 37 parts
Handlebar, Control handle
Fits FS 360, FS 420, FS 420 L.
Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.
Parts (37)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4128 790 1701 | Handlebar Fitment / change note → | 1 |
| 2 | 4128 790 1715 | Handlebar Fitment / change note → | 1 |
| 3 | 4128 791 0300 | Handle, left | 1 |
| 4 | 4128 791 2710 | Tube Fitment / change note → | 1 |
| 5 | 4116 791 0600 | Clamp, top | 1 |
| 6 | 4116 791 0615 | Clamp, base | 1 |
| 7 | 9022 371 0710 | Spline screw IS-M4x20 | 4 |
| 8 | 4116 791 0610 | Clamp, top | 1 |
| 9 | 4116 791 0605 | Clamp, base | 1 |
| 10 | 9022 341 1010 | Spline screw IS-M5x18 | 2 |
| 11 | 9308 021 0180 | Washer 8.4 | 1 |
| 12 | 4119 791 6100 | Hexagon head screw M8x70 | 1 |
| 13 | 4128 790 0304 | Handle, right | 1 |
| 14 | 9074 478 3025 | Pan head self-tapping screw IS-P4x16 | 3 |
| 15 | 4128 182 1700 | Slide control | 1 |
| 16 | 4128 182 4201 | Detent spring | 1 |
| 17 | 4128 182 6200 | Collar screw | 1 |
| 18 | 4128 182 4502 | Torsion spring | 1 |
| 19 | 4128 182 4501 | Torsion spring | 1 |
| 20 | 4128 182 1000 | Throttle trigger | 1 |
| 21 | 4128 182 4504 | Torsion spring | 1 |
| 22 | 4128 182 4500 | Torsion spring | 1 |
| 23 | 4128 182 0800 | Lockout lever | 1 |
| 24 | 4128 793 3000 | Slide | 1 |
| 25 | 4128 791 3100 | Spring | 1 |
| 26 | 9214 320 0700 | Lock nut M5 | 1 |
| 27 | 9022 346 1070 | Spline screw IS-M5x30 | 1 |
| 28 | 9291 021 0120 | Washer 5.3 | 1 |
| 29 | 4116 180 1106 | Throttle cable | 1 |
| 30 | 4116 182 3200 | Throttle cable | 1 |
| 31 | 4116 180 7202 | Guide piece | 1 |
| 32 | 9074 478 3025 | Pan head self-tapping screw IS-P4x16 | 2 |
| 33 | 4116 431 2105 | Double connector tag | 1 |
| 34 | 4116 431 2100 | Connector tag | 1 |
| 35 | 9074 478 4425 | Pan head self-tapping screw IS-P6x19 | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 4128 790 1309 | Control handle | 1 |
| — | 4116 790 1351 | Control handle | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · FS 550 / FS 360 / FS 420
FS 550: tool-specific handlebars and M 14x 1.5 pinion set
Complete gearhead includes housing and pinions; handle purposes remain separate.
- Handlebar 26, 4128 790 1701, is for MOWING. Handlebar 27, 4128 790 1715, is for CIRCULAR SAW BLADES. Complete control handle 28 is 4128 790 1300; throttle cable 29 is 4116 180 1104. The distinct handlebars are not an interchangeable-purpose claim.
- Complete gearhead 30, 4116 640 0104, INCLUDES gear housing 31, 4116 640 0511, and pinion set 32, 4116 640 7302. The pinion-set row explicitly prints M14x1.5; this does not supply a mounting torque. Page 2 separately establishes the left-hand mounting thread.
- Remark 1 extends handlebars 26/27 and COMPLETE gearhead 30 to predecessor FS 360/FS 420; it does not separately mark control handle 28, cable 29, gear housing 31 or pinion set 32. Keep inclusion and assembly-level applicability separate.
- Modification introduction is IN PROGRESS; no FS 550 introduction serial is printed. For component parts of assemblies not shown, the source delegates to the FS 500/550 parts list. Later IPL navigation is not proof of 1997 contents; this note does not fabricate the omitted component lists.
- Historical TI 44/1997 source guidance, not current availability, verified physical interchange or a complete repair procedure. Shared IPL sheets do not extend claims to unnamed variants. No hardware operation was performed.
Source: TI 44/1997, p. 10 — Section7 rows26–32, remark1, introduction status and component-list delegation.
Part numbers (7)
- 4128 790 1701 — Item26 mowing handlebar; remark1Exact section7 row; assembly inclusions and remark1 retained · FS 550 table context; remark1 also names FS 360 and FS 420; preserve assembly/bore restrictions
- 4128 790 1715 — Item27 circular-saw handlebar; remark1Exact section7 row; assembly inclusions and remark1 retained · FS 550 table context; remark1 also names FS 360 and FS 420; preserve assembly/bore restrictions
- 4128 790 1300 — Item28 complete control handleExact section7 row; assembly inclusions and remark1 retained · FS 550 table context; no separate predecessor remark on this row
- 4116 180 1104 — Item29 throttle cableExact section7 row; assembly inclusions and remark1 retained · FS 550 table context; no separate predecessor remark on this row
- 4116 640 0104 — Item30 complete gearhead including31/32; remark1Exact section7 row; assembly inclusions and remark1 retained · FS 550 table context; remark1 also names FS 360 and FS 420; preserve assembly/bore restrictions
- 4116 640 0511 — Item31 gear housingExact section7 row; assembly inclusions and remark1 retained · FS 550 table context; no separate predecessor remark on this row
- 4116 640 7302 — Item32 pinion set M14x1.5Exact section7 row; assembly inclusions and remark1 retained · FS 550 table context; no separate predecessor remark on this row
Service note · FS 360 / FS 420
FS 360 / FS 420: sawing handlebar and control-handle tube
Keep 4116 791 2711 → 4128 790 1715 separate from 4116 791 2701 → 4128 791 2710.
- After old stocks are used up, handlebar 4116 791 2711 FOR SAWING MODELS is replaced by 4128 790 1715, while control-handle tube 4116 791 2701 is replaced by 4128 791 2710. The TI says these changes bring FS 360/420 into line with FS 550. The tube is not a complete handlebar assembly.
- The source expressly states full interchangeability and the same shape for the original/new replacement handlebars. No numeric serial, torque, mounting change or verified physical test is given. Stock exhaustion is not a dated cutoff or a present stock guarantee.
- The 01-2012 FS 360/420/420 L handlebar sheet provides exact new-number anchors for 4128 790 1715 and 4128 791 2710. The available FS 500/550/550 L sheet (doc6774, drawing 398ET054 SC) independently shows those numbers at positions 2 and 4: the long sawing handlebar and separate short control-handle tube. That later drawing does not establish the special-mowing 4116 790 1700 illustration or extend this TI to FS 420 L, FS 500 or FS 550 L.
- Historical TI49/1998 only, not current stock or physical interchange verification. Shared catalog sheets do not extend these instructions to FS 500, FS 550 L, FS 420 L or other models. The throttle cutoff is not a clutch, fuel-hose or handlebar cutoff.
Source: TI 49/1998, p. 4 — FS 360 / FS 420: sawing handlebar and control-handle tube.
Part numbers (4)
- 4116 791 2711 — Original sawing-model handlebarOriginal version · FS 360/FS 420; exact TI49/1998 version and conditions only
- 4128 790 1715 — New sawing-model handlebarReplacement · FS 360/FS 420; exact TI49/1998 version and conditions only
- 4116 791 2701 — Original tube for control handleOriginal version · FS 360/FS 420; exact TI49/1998 version and conditions only
- 4128 791 2710 — New tube for control handleReplacement · FS 360/FS 420; exact TI49/1998 version and conditions only
Wrong number or missing part for the FS 360, FS 420, FS 420 L? Report a correction →