Stihl 4116 · Section O · 14 of 16 · 29 parts
Deflector
Fits FS 500, FS 550, FS 550 L.
Historical fitment & changes (5) — includes parts and conditions not shown on this drawing.
Parts (29)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4116 710 2700 | Shield | 1 |
| 2 | 4116 641 7101 | Support | 1 |
| 3 | 9022 341 1270 | Spline screw IS-M6x14 | 3 |
| 4 | 4110 717 2801 | Guard washer | 1 |
| 5 | 4116 713 4502 | Deflector Fitment / change note → | 1 |
| 6 | 4116 716 6501 | Clamp Fitment / change note → | 1 |
| 7 | 4110 716 2900 | Strip | 1 |
| 8 | 9291 021 0140 | Washer 6.4 Fitment / change note → | 2 |
| 9 | 9022 341 1430 | Spline screw IS-M6x50 | 2 |
| 10 | 4119 716 3203 | Skirt | 1 |
| 11 | 4119 710 6000 | Blade | 1 |
| 12 | 4118 713 4105 | Blade | 1 |
| 13 | 9074 478 4125 | Pan head self-tapping screw IS-5x14 | 2 |
| 14 | 4116 710 8104 | Deflector Fitment / change note → option | 1 |
| 15 | 4116 716 6402 | Clamp Fitment / change note → option | 1 |
| 16 | 9222 068 0900 | Square nut M6 Fitment / change note → option | 2 |
| 17 | 4116 716 6502 | Clamp Fitment / change note → option | 1 |
| 18 | 4116 711 2501 | Sleeve Fitment / change note → option | 1 |
| 19 | 9438 782 3170 | Rivet 4x8 Fitment / change note → option | 4 |
| 20 | 9022 341 1420 | Spline screw IS-M6x45 Fitment / change note → option | 2 |
| 22 | 9291 021 0140 | Washer 6.4 Fitment / change note → | 3 |
| 23 | 9022 341 1270 | Spline screw IS-M6x14 | 3 |
| 24 | 4116 710 8206 | Limit stop Ø 250 Fitment / change note → | 1 |
| 25 | 4116 790 3901 | Transport guard Ø 350 Fitment / change note → | 1 |
| 26 | 4116 792 4300 | Clamping wire | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 4116 007 1023 | Shield assy. | 1 |
| — | 4116 007 1020 | Deflector kit Fitment / change note → | 1 |
| — | 4116 710 8102 | Deflector Fitment / change note → | 1 |
| — | 4116 710 8103 | Deflector Fitment / change note → option | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Historical fitment · FS 550
FS 550: seven approved cutting tools in TI44/1997
Keep 225 mm chisel/scratcher blades distinct from the 250 mm scratcher blade.
- The complete approved roster here is AutoCut 40-4 (4005 710 2100), PolyCut 40-3 (4111 710 2100), cutting blade 255-8 (4000 713 3802), brush knife 350-3 (4110 713 4100), circular saw 225 CHISEL TOOTH (4110 713 4204), circular saw 225 SCRATCHER TOOTH (4000 713 4205), and circular saw 250 SCRATCHER TOOTH (4104 713 4200). Drawings 6+7 share an illustration but retain separate diameters/numbers.
- The approved 250 mm row is SCRATCHER TOOTH; no 250 mm chisel-tooth approval is supplied by this roster. Do not enlarge the cutting-tool approval using the broader transport-guard descriptions on page 7. Use the relevant mowing/circular-saw handle and required deflector/limit-stop configuration, not a blade-only fitment assertion.
- For circular saws, section 3.2 REQUIRES limit stop 4116 710 8201 for 225 mm or 4116 710 8206 for 250 mm. For mowing, section 3.1 specifies deflector 4116 713 4501 with the applicable thrust-plate/grass-deflector arrangement. The related guard note preserves these combinations.
- Historical TI44/1997 guidance for the named FS 550 configuration only. Shared IPL sheets do not extend these claims to FS 500, FS 550 L, FS 360 or FS 420. Not current stock, verified physical interchange or a complete operating procedure. No hardware operation was performed.
Source: TI 44/1997, p. 1 · TI 44/1997, p. 6 — Section 3 all seven rows and corresponding tool drawings; cover handle configuration.
Part numbers (7)
- 4005 710 2100 — AutoCut 40-4Listed approved FS 550 tool; matching guards required · FS 550; Section 3 all seven rows and corresponding tool drawings; cover handle configuration
- 4111 710 2100 — PolyCut 40-3Listed approved FS 550 tool; matching guards required · FS 550; Section 3 all seven rows and corresponding tool drawings; cover handle configuration
- 4000 713 3802 — Cutting blade 255-8Listed approved FS 550 tool; matching guards required · FS 550; Section 3 all seven rows and corresponding tool drawings; cover handle configuration
- 4110 713 4100 — Brush knife 350-3Listed approved FS 550 tool; matching guards required · FS 550; Section 3 all seven rows and corresponding tool drawings; cover handle configuration
- 4110 713 4204 — Circular saw 225 chisel toothListed approved FS 550 tool; matching guards required · FS 550; Section 3 all seven rows and corresponding tool drawings; cover handle configuration
- 4000 713 4205 — Circular saw 225 scratcher toothListed approved FS 550 tool; matching guards required · FS 550; Section 3 all seven rows and corresponding tool drawings; cover handle configuration
- 4104 713 4200 — Circular saw 250 scratcher toothListed approved FS 550 tool; matching guards required · FS 550; Section 3 all seven rows and corresponding tool drawings; cover handle configuration
Historical fitment · FS 550
FS 550: mowing deflectors and mandatory saw limit stops
225 mm and 250 mm saws need different stops; mowing has two thrust-plate arrangements.
- All mowing versions come standard with deflector 4116 713 4501 (drawing 1). Depending on model and standard cutting tool, the lower arrangement is EITHER a 2.56 in (65 mm) thrust plate (2), OR separate grass deflector 4116 710 2701 (3) COMBINED WITH a 2.36 in (60 mm) thrust plate (4), as on FS 360/420. The main mowing deflector and the separate grass deflector are different components, not alternatives to each other.
- For circular saw blades, limit stop 4116 710 8201 MUST be used for 8.9 in/225 mm blades; limit stop 4116 710 8206 MUST be used for 9.8 in/250 mm blades. A common gearhead or blade mounting thread does not waive these size-specific stops.
- The source does not provide a complete model/standard-tool matrix choosing between the two mowing lower arrangements, nor thrust-plate part numbers here. Do not fabricate either. The section 1 starred 65 mm plate/special brush-knife ring and page 6 configuration-dependent standard equipment remain distinct statements.
- Historical TI44/1997 guidance for the named FS 550 configuration only. Shared IPL sheets do not extend these claims to FS 500, FS 550 L, FS 360 or FS 420. Not current stock, verified physical interchange or a complete operating procedure. No hardware operation was performed.
Source: TI 44/1997, p. 2 · TI 44/1997, p. 6 — Sections 3.1/3.2 and 398TI003 KN; section 1 accessory context.
Part numbers (4)
- 4116 713 4501 — Main mowing deflectorStandard on mowing versions · FS 550; Sections 3.1/3.2 and 398TI003 KN; section 1 accessory context
- 4116 710 2701 — Separate grass deflectorCombined with 60 mm thrust plate · FS 550; Sections 3.1/3.2 and 398TI003 KN; section 1 accessory context
- 4116 710 8201 — Limit stop for 225 mm circular sawRequired · FS 550; Sections 3.1/3.2 and 398TI003 KN; section 1 accessory context
- 4116 710 8206 — Limit stop for 250 mm circular sawRequired · FS 550; Sections 3.1/3.2 and 398TI003 KN; section 1 accessory context
Historical fitment · FS 550
FS 550: transport guards and brush-knife accessories
Transport protection is not approval to operate with every tool named in the guard table.
- Transport guard 4116 790 3900 is listed for cutting blade 255-8, brush knife 350-3 and circular saw blades 225/250, scratcher and chisel tooth. Guard 4119 790 3906 lists cutting blade 255-8 and those circular saws, but DOES NOT list the brush knife 350-3. Do not merge their applications.
- These are TRANSPORT guards, not operating deflectors or limit stops. The broader guard wording does not add a 250 mm chisel-tooth blade to the seven approved cutting tools on page 6.
- Deflector 4116 710 8105 is the SHREDDER deflector for special cutting applications with the brush knife. Guard plate kit 4116 007 1012 protects the underside of the powerhead. Neither replaces the size-specific circular-saw limit stops.
- Historical TI 44/1997 source guidance, not current availability, verified physical interchange or a complete repair procedure. Shared IPL sheets do not extend claims to unnamed variants. No hardware operation was performed.
Source: TI 44/1997, p. 6 · TI 44/1997, p. 7 — Section4: both transport guards, shredder deflector and underside guard kit; section3 approval context.
Part numbers (4)
- 4116 790 3900 — Transport guard including brush knife350-3Section4 user accessory · Only named models/configurations and restrictions in this note
- 4119 790 3906 — Transport guard; brush knife not listedSection4 user accessory · Only named models/configurations and restrictions in this note
- 4116 710 8105 — Shredder deflector for brush knifeSection4 user accessory · Only named models/configurations and restrictions in this note
- 4116 007 1012 — Powerhead underside guard plate kitSection4 user accessory · Only named models/configurations and restrictions in this note
Conditional replacement · FS 550
FS 550: sleeved drive tube and matching deflector clamp
Mount only on the 37.5 mm sleeve immediately behind the gearhead; old parts remain for older machines.
- The sleeve defines the correct deflector position IMMEDIATELY BEHIND THE GEARHEAD. It raises the tube diameter in the CLAMP AREA to 37.5 mm (printed 1.5 inches) over a 50 mm (printed 2 inches) length. Modified deflector and clamp fit that larger area, so the deflector can now be secured ONLY WITHIN THE SLEEVE AREA. These rounded inch values are source equivalents, not new machining tolerances.
- Figure 398TI009 KN identifies drive tube (1), deflector (2) and clamp (3); all three mating areas are marked diameter 37.5 mm. The integrally CAST number INSIDE the NEW clamp begins 4116..., distinguishing the ORIGINAL 4110... clamp. Do not use a generic external marking or the source figure as a fabrication template; no tightening torque is given.
- The drive-tube row is explicitly FS 550 (USA): 4116 710 7145 becomes 4116 710 7155. Deflector kit WITHOUT GRASS SHIELD changes 4116 007 1016 to 4116 007 1020; deflector assembly changes 4116 710 8101 to 4116 710 8102. The table says each of the above includes deflector item 2 (4116 713 4501 to 4116 713 4502) and clamp item 3 (4110 716 6501 to 4116 716 6501). Keep the USA drive-tube qualification distinct from the kit/assembly descriptions.
- All five rows carry remark 1: ORIGINAL versions remain available for OLDER MACHINES AND FS 360 / FS 420. This is not authorization to fit the NEW FS 550 parts to those models. All other parts as before; introduction IN PROGRESS, with no serial boundary or unconditional whole-system retrofit statement.
- The retained FS 500/550/550 L J sheet lists the exact new drive tube at position 3 as diameter 35 mm / 1 3/8 inches. That nominal tube description does NOT erase the source 37.5 mm SLEEVE-AREA diameter. O sheet retains exact kit, assembly, deflector and clamp rows; shared-sheet FS 500 and FS 550 L coverage is not added. Preserve IPL quantities, geometry and contents independently from the historical TI.
- No hardware operation was performed. Historical factory supply is not current stock or verified physical interchange.
Source: TI 33/1998, p. 1 — Section 1 complete: sleeve location and dimensions, clamp identification, exploded figure, five part rows, inclusions and availability remark.
Part numbers (10)
- 4116 710 7145 — Drive tube FS 550 (USA)Original · FS 550; USA restriction on drive-tube row
- 4116 710 7155 — Drive tube FS 550 (USA), sleevedNew · FS 550; USA restriction on drive-tube row
- 4116 007 1016 — Deflector kit without grass shieldOriginal · FS 550; USA restriction on drive-tube row
- 4116 007 1020 — Deflector kit without grass shieldNew · FS 550; USA restriction on drive-tube row
- 4116 710 8101 — Deflector assemblyOriginal · FS 550; USA restriction on drive-tube row
- 4116 710 8102 — Deflector assemblyNew · FS 550; USA restriction on drive-tube row
- 4116 713 4501 — Deflector, item 2Original · FS 550; USA restriction on drive-tube row
- 4116 713 4502 — Deflector, item 2New · FS 550; USA restriction on drive-tube row
- 4110 716 6501 — Clamp, item 3Original · FS 550; USA restriction on drive-tube row
- 4116 716 6501 — Clamp, item 3New · FS 550; USA restriction on drive-tube row
Conditional replacement · FS 500 / FS 550
FS 500 / FS 550: shredder blade and complete deflector mounting
Initial installation requires blade 4000 713 3902 and complete deflector 4116 710 8103; the deflector shell alone is not the full kit.
- Section 1.1 introduces shredder blade 320-2 with optimized geometry/material and a specially developed robust deflector with riveted aluminium skirt. Drawing 398TI015 KN depicts the blade and deflector. The new deflector replaces 4116 710 8105 and is also suitable for the brush knife; this is not approval for every cutting tool.
- For initial installation, order BOTH shredder blade 4000 713 3902 and deflector assembly 4116 710 8103. The assembly comes with all necessary mounting hardware. The summary distinguishes complete assembly (items 5–12), new shell 4116 710 8104 (items 6 and 7) and previous deflector 4116 710 8105 (items 6–10). Do not treat these as identical kits.
- Drawing 398TI017 KN: stepped sleeve (1) fits over the drive tube and must be riveted in position to define the installed deflector position. The recommended thrust plate (2) is 65 mm diameter; thrust washer (3) is 70 mm diameter. Center the blade exactly on the thrust-plate shoulder and fit hardened guard ring (4) to protect the mounting nut. The diagram places plate below the blade and washer/guard ring above it. No rivet-hole coordinates, torque or unprinted guard-ring order number is inferred.
- The drawing callouts 1–4 on page 1 are NOT the summary item numbers on pages 2–3. Drawing 398TI019 SC shows blade 1, brush knife 2, circular blade 3, shell 5, clamp/nut 6/7, clamp/washer/screw 8/9/10, sleeve/rivet 11/12 and transport guard 13. The previous item 4 and unnumbered complete assembly are not invented as extra visible callouts.
- The table explicitly gives two square nuts, two washers and two M6x45 screws. Rivet A 4x8 has no printed quantity in this TI; the later IPL quantity is not silently substituted. New clamps replace 4116 716 6400 and 4116 716 6500 with 6402 and 6502 endings respectively; the unchanged fasteners retain their numbers.
- Transport guard 4116 790 3901 replaces 4116 790 3900 and now also fits the shredder blade. Remark 1 applies only to previous deflector 4116 710 8105 and previous transport guard: no longer available from factory. Remark 2 applies to both previous clamps: remain available. Introduction is in progress, not the clutch serial threshold in section 2.
- Historical TI34/1999 evidence only; availability and performance claims are dated source statements, not current stock or measured performance. Grouped IPL navigation does not add FS 550 L or other unlisted variants. No hardware operation or physical interchange verification.
Source: TI 34/1999, p. 1 · TI 34/1999, p. 2 · TI 34/1999, p. 3 — FS 500 / FS 550: shredder blade and complete deflector mounting; complete relevant text, drawings and table rows.
Part numbers (15)
- 4000 713 3902 — Shredder blade 320-2New; summary item 1 · FS 500 / FS 550
- 4116 710 8103 — Shredder deflector assembly, including items 5–12Complete initial-installation deflector · FS 500 / FS 550
- 4116 710 8105 — Previous deflector, including items 6–10Previous; remark 1 · FS 500 / FS 550
- 4116 710 8104 — Deflector, including items 6 and 7New shell subassembly; item 5 · FS 500 / FS 550
- 4116 716 6400 — ClampPrevious item 6; remark 2 · FS 500 / FS 550
- 4116 716 6402 — ClampNew item 6 · FS 500 / FS 550
- 9222 068 0900 — Square nut M6, twoUnchanged; item 7 · FS 500 / FS 550
- 4116 716 6500 — ClampPrevious item 8; remark 2 · FS 500 / FS 550
- 4116 716 6502 — ClampNew item 8 · FS 500 / FS 550
- 9291 021 0140 — Washer A 6.4, twoUnchanged; item 9 · FS 500 / FS 550
- 9022 341 1420 — Spline screw IS M6x45, twoUnchanged; item 10 · FS 500 / FS 550
- 4116 711 2501 — Stepped sleeveNew; item 11 · FS 500 / FS 550
- 9438 782 3170 — Rivet A 4x8New; item 12; no quantity printed in TI table · FS 500 / FS 550
- 4116 790 3900 — Transport guardPrevious item 13; remark 1 · FS 500 / FS 550
- 4116 790 3901 — Transport guardNew item 13; modified for shredder blade · FS 500 / FS 550
Wrong number or missing part for the FS 500, FS 550, FS 550 L? Report a correction →