← FS 360, FS 420, FS 420 L · FS 500, FS 550, FS 550 L

Stihl 4116 · Section Q · 16 of 16 · 32 parts

Tools, Full harness

Fits FS 500, FS 550, FS 550 L.

Parts diagrams →

Historical fitment & changes (3) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110101112131314151617181922021212223232425262728345678889
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (32)

PosPart numberDescriptionQty
1 4128 890 3400 Combination wrench 1
2 4130 893 7800 Locking pin 1
3 5910 890 2305 Screwdriver 1
4 4119 710 9001 Full harness 1
5 4119 710 6306 Backplate with strap 1
6 not sold separately Strap 38x780mm / 1.5x30.7'' not available as a separate item 1
7 not sold separately Strap 25 mm x 1.18 m / 1x46.5'' not available as a separate item 1
8 4203 792 7200 Slide 3
9 4119 718 6300 Slide 1
10 4119 718 6310 Slide 2
11 4119 710 6400 Buckle 1
12 4119 718 7400 Guard plate 1
13 4119 710 6906 Spring safety hook 1
14 9408 021 4530 Rivet shank 4x8x6
15 9409 021 4420 Rivet head 4x8
16 4147 710 9002 Universal harness ADVANCE option 1
17 4147 710 9004 Universal harness ADVANCE XXL option 1
18 4147 710 6400 Buckle option 1
19 4147 740 2500 Hip pad option 1
20 4147 710 6900 Spring safety hook option 1
21 4134 710 6401 NLA Buckle option 1
22 4134 718 6300 NLA Slide option 1
23 4203 792 7200 Slide option 3
24 9022 313 0680 Spline screw IS-M4x16 option 2
25 9307 021 0100 Washer 4.3 option 2
26 9214 320 0600 Lock nut M4 option 2
27 0000 884 0307 Safety glasses 1
28 0000 891 0801 NLA Tool roll option 1
Not numbered on the diagram — assemblies, kits and options
— 4116 890 1400 Tool kit 1
— 0000 930 2242 Webbing 38 mm x 5 m / 1.5x197'' not illustratedoption 1
— 0000 930 2241 Webbing 25 mm x 10 m / 1'' x 33' not illustratedoption 1
— 4119 710 6406 Buckle with strap 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · FS 550

FS 550: mowing and circular-saw handle configurations

Series 4116 introduction describes differences from FS 360/420, not wholesale parts interchange.

  • The cover identifies FS 550, series 4116, as the largest model in the contemporary high-performance clearing-saw line. Recommended applications are the same as FS 360 and FS 420. The chapters describe DIFFERENCES over those predecessors, not a complete specification or universal retrofit list.
  • The supplied bike handle is designed for circular saw blades; a special bike handle is available for mowing. Both configurations are pictured separately. The multifunction control handle has a soft, non-slip grip surface. No handle dimension or conversion procedure is inferred from the photographs.
  • The improved FOUR-POINT antivibration system is claimed to reduce vibration by 20%. This is a historical source claim, not a measured result for an individual machine; no vibration exposure value is supplied.
  • The new comfortable FULL HARNESS is OPTIONAL, with its front/rear illustration and description delegated to retained TI22/1997. That accessory bulletin already has separate reviewed design/care and spare-parts notes; optional does not mean included with every FS 550. No new harness part-number equivalence is inferred from the drawing.
  • Historical TI44/1997 guidance for the named FS 550 configuration only. Shared IPL sheets do not extend these claims to FS 500, FS 550 L, FS 360 or FS 420. Not current stock, verified physical interchange or a complete operating procedure. No hardware operation was performed.

Source: TI 44/1997, p. 1 · TI 44/1997, p. 2 — Cover, contents and section 1: scope, handles, four-point AV and optional harness.

Referenced bulletin evidence: TI 22/1997, p. 1 · TI 22/1997, p. 2 — Full harness 4134 710 9000: design, release and care.

No additional parts-table entry added.

Historical fitment · FS 550

FS 550: transport guards and brush-knife accessories

Transport protection is not approval to operate with every tool named in the guard table.

  • Transport guard 4116 790 3900 is listed for cutting blade 255-8, brush knife 350-3 and circular saw blades 225/250, scratcher and chisel tooth. Guard 4119 790 3906 lists cutting blade 255-8 and those circular saws, but DOES NOT list the brush knife 350-3. Do not merge their applications.
  • These are TRANSPORT guards, not operating deflectors or limit stops. The broader guard wording does not add a 250 mm chisel-tooth blade to the seven approved cutting tools on page 6.
  • Deflector 4116 710 8105 is the SHREDDER deflector for special cutting applications with the brush knife. Guard plate kit 4116 007 1012 protects the underside of the powerhead. Neither replaces the size-specific circular-saw limit stops.
  • Historical TI 44/1997 source guidance, not current availability, verified physical interchange or a complete repair procedure. Shared IPL sheets do not extend claims to unnamed variants. No hardware operation was performed.

Source: TI 44/1997, p. 6 · TI 44/1997, p. 7 — Section4: both transport guards, shredder deflector and underside guard kit; section3 approval context.

Part numbers (4)
  • 4116 790 3900 — Transport guard including brush knife350-3Section4 user accessory · Only named models/configurations and restrictions in this note
  • 4119 790 3906 — Transport guard; brush knife not listedSection4 user accessory · Only named models/configurations and restrictions in this note
  • 4116 710 8105 — Shredder deflector for brush knifeSection4 user accessory · Only named models/configurations and restrictions in this note
  • 4116 007 1012 — Powerhead underside guard plate kitSection4 user accessory · Only named models/configurations and restrictions in this note

Service note · FS 550

FS 550: nylon line and tool-specific sharpening aids

0.095-inch orange line serves both heads; 0.105-inch red is listed for PolyCut 40-3 only.

  • 0.095-inch ORANGE nylon line is listed for AutoCut 40-4 and PolyCut 40-3. 0.105-inch RED line is listed for PolyCut 40-3 ONLY. No line stock number or line capacity is supplied; do not extend the red-line row to AutoCut.
  • Saw set 4020 893 5000 is listed for the 225 mm CHISEL-TOOTH circular saw blade. Sharpening template 4020 890 5500 is listed for the BRUSH KNIFE. This table does not provide sharpening angles, orientation or a setting procedure, nor approve the saw set for scratcher teeth.
  • Historical TI 44/1997 source guidance, not current availability, verified physical interchange or a complete repair procedure. Shared IPL sheets do not extend claims to unnamed variants. No hardware operation was performed.

Source: TI 44/1997, p. 7 — Complete sections4.1 and4.2.

Part numbers (2)
  • 4020 893 5000 — Saw set for225 mm chisel-tooth bladeSharpening aid · Only named models/configurations and restrictions in this note
  • 4020 890 5500 — Brush-knife sharpening templateSharpening aid · Only named models/configurations and restrictions in this note

Wrong number or missing part for the FS 500, FS 550, FS 550 L? Report a correction →