← FS 90 · FS 96

Stihl 4117 · Section G · 7 of 10 · 32 parts

Drive tube assembly, Loop handle

Fits FS 96.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110101112131415161718181922021222324252627282933044056789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (32)

PosPart numberDescriptionQty
1 4117 710 7100 Drive tube assembly Ø 26 mm / 1 1/16'' 1
2 4117 711 3200 Drive shaft 1
3 4112 710 6701 Hose clamp 1
4 9015 319 1280 Hexagon head screw M6x16 1
5 4126 791 0821 Handle molding, outer 1
6 4126 182 4506 Torsion spring 1
7 4126 182 0805 Lockout lever 1
8 4126 182 6210 Collar screw 1
9 4126 790 1101 Handle molding, inner Fitment / change note → 1
10 4126 791 5300 Connector tag 2
11 4126 182 1705 Slide control 1
12 4126 182 4705 Detent spring 1
13 4126 182 6205 Collar screw 1
14 4126 182 4505 Torsion spring 1
15 9417 003 7510 Push nut 1
16 4126 182 1006 Throttle trigger 1
17 4126 791 9400 Hose clamp 2
18 4126 792 6100 Square washer 4
19 9045 371 0980 Socket head screw M5x16 2
20 9074 478 3066 Pan head self-tapping screw IS-P4x19 4
21 4119 182 2110 Support 2
22 4127 180 1115 Throttle cable 1
23 9208 260 0900 Hexagon nut M6 2
24 0751 030 8487 Round plug no longer available from factory 1
25 0751 030 8953 NLA Terminal socket 4.8-1 no longer available from factory 3
26 0751 030 8470 Grommet no longer available from factory 3
27 0751 010 1110 Lead 10 m / 33' option 1
28 4126 711 7200 Hose 950 mm / 37 7/16'' 1
29 4126 790 3400 Loop handle 1
30 4126 791 2001 Handle hose 1
40 4126 182 1005 Throttle trigger 1
Not numbered on the diagram — assemblies, kits and options
— 4126 790 1308 Control handle 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · FS 72 / FS 74 / FS 86 / FS 96 / FS 106

FS 72, FS 74, FS 86, FS 96, FS 106: complete control-handle assignment

4133 790 1301 retains its number; page12 footnote4 specifies the five named models.

  • Complete control handle 4133 790 1301 (item1) keeps its number and is assigned by footnote4 to FS 72, FS 74, FS 86, FS 96 and FS 106. Only the modified assembly is factory-available. FS 81 shares a catalog sheet with FS86 but is NOT in this source row; FS76 uses the separate4123 790 1313 assembly.
  • The handle includes items3 and5–7: new inner molding4126 790 1102 (replaces4126 790 1101), additional spring4126 182 4507, new trigger4126 182 1007 and new interlock4126 182 0806. Original individual molding/trigger/interlock versions are no longer factory-available. Other parts remain as before.
  • Page11 group restriction accompanies this table: a spring retrofit to an original handle requires the new trigger AND new inner molding together; original components cannot be installed individually in the modified handle. Control-half screws now2.5 Nm (1.8 lbf ft). No production thresholds are given for FS86, FS96 or FS106; do not copy the FS72/74/76 thresholds onto them.
  • FS72 starts the control change at X 24 956 489 and FS74 at X 24 974 840. The separate conversion-kit footnotes assign4133 007 1011 to FS74 and4133 007 1020 to FS76; they do not establish conversion kits for every model in this complete-handle row.
  • Historical English TI01/1994, sections 5–10. Exact named models and the specified assembly are retained; no unlisted variants or current spare availability are inferred. No physical interchange test was performed.

Source: TI 1/1994, p. 11 · TI 1/1994, p. 12 — FS 72, FS 74, FS 86, FS 96, FS 106: complete control-handle assignment.

Part numbers (6)
  • 4133 790 1301 — Complete modified control handle; unchanged number, five named modelsunchanged-number · FS 72, FS 74, FS 86, FS 96, FS 106: complete control-handle assignment
  • 4126 790 1101 — Original inner molding, item3original · FS 72, FS 74, FS 86, FS 96, FS 106: complete control-handle assignment
  • 4126 790 1102 — New inner molding, item3included-component · FS 72, FS 74, FS 86, FS 96, FS 106: complete control-handle assignment
  • 4126 182 4507 — Torsion spring, item5included-component · FS 72, FS 74, FS 86, FS 96, FS 106: complete control-handle assignment
  • 4126 182 1007 — New trigger, item6included-component · FS 72, FS 74, FS 86, FS 96, FS 106: complete control-handle assignment
  • 4126 182 0806 — New interlock, item7included-component · FS 72, FS 74, FS 86, FS 96, FS 106: complete control-handle assignment

Wrong number or missing part for the FS 96? Report a correction →