← FS 90 · FS 96

Stihl 4117 · Section F · 6 of 10 · 36 parts

Two-handed handle bar

Fits FS 96.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
11011121314151617181922021212222232324252627282933031324440415566789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (36)

PosPart numberDescriptionQty
1 4126 791 7610 Handlebar support Fitment / change note → → replaced by 4126 791 7611 TI 1/1994 1
2 4126 791 0600 Clamp 1
3 4126 791 0605 Clamp 1
4 9291 021 0140 Washer 6.4 6
5 9321 630 0140 Spring washer 6 6
6 9007 346 1370 Hexagon head screw M6x30 6
7 4126 791 1700 Two-handed handle bar 1
8 4126 791 0801 Handle molding, outer 1
9 4126 182 4506 Torsion spring 1
10 4126 182 0800 Lockout lever 1
11 4126 182 6210 Collar screw 1
12 4126 791 0811 Handle molding, inner 1
13 4126 182 1700 Slide control 1
14 4126 182 4700 Detent spring 1
15 4126 182 6200 Collar screw 1
16 4126 442 1600 Contact spring 1
17 4126 182 6210 Collar screw 1
18 4126 182 4500 Torsion spring 1
19 4126 182 1001 Throttle trigger 1
20 4126 442 1610 Contact spring 1
21 9099 021 1890 Self-tapping screw 2.9x25 5
22 9210 260 0700 Hexagon nut M5 2
23 9049 216 1070 Pan head screw M5x30 2
24 4127 180 1110 Throttle cable 1
25 9208 260 0900 Hexagon nut M6 2
26 0751 030 8487 Round plug no longer available from factory 1
27 0751 030 8953 NLA Terminal socket 4.8-1 no longer available from factory 3
28 0751 030 8470 Grommet no longer available from factory 3
29 0751 010 1110 Lead 10 m / 33' option 1
30 4126 711 7200 Hose 950 mm / 37 7/16'' 1
31 4126 791 0805 Handle molding, outer 1
32 4126 791 0815 Handle molding, inner 1
40 4117 711 9400 Bearing bushing 6
41 4126 182 1000 Throttle trigger 1
Not numbered on the diagram — assemblies, kits and options
— 4126 791 1701 Two-handed handle bar not illustrated 1
— 4126 790 1303 Control handle 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · FS 74 / FS 76 / FS 81 / FS 86 / FS 96 / FS 106 / FS 160 / FS 180

FS 74, FS 76, FS 81, FS 86, FS 96, FS 106, FS 160, FS 180: handlebar support and sleeve selection

4126 791 7610 → 4126 791 7611; 24mm tubes require sleeve 4121 791 7200.

  • Modified support 4126 791 7611 (item4) replaces 4126 791 7610 for 25.4 mm (1 in) and 26 mm (approximately 1 1/16 in) drive tubes. For 24 mm (approximately 15/16 in) tubes, fit sleeve 4121 791 7200 (item5). The scan clearly prints 1 1/16, not 11/16; extracted text lost the space.
  • Exact assignment table: FS 76 and FS 81 have 24 mm tubes, sleeve REQUIRED; FS 74 has 25.4 mm, NO sleeve; FS 86, FS 96, FS 106, FS 160 and FS 180 have 26 mm, NO sleeve. These are the listed historical bike-handle configurations, not a universal specification for every variant bearing those model names.
  • Introduction is in progress. Original support stock is supplied only until exhausted. The support is included in bike-handle kit 4133 007 1010, whose unmodified stock is also supplied until exhausted; this kit reference belongs to section9 FS 74/76, not an asserted conversion kit for every model in the diameter table.
  • The figure shows the support and sleeve together with the surrounding clamp pieces. No new part number for those other pieces or clamp torque is supplied; no measured physical fit test is claimed.
  • Historical English TI01/1994, sections 5–10. Exact named models and the specified assembly are retained; no unlisted variants or current spare availability are inferred. No physical interchange test was performed.

Source: TI 1/1994, p. 10 · TI 1/1994, p. 11 — FS 74, FS 76, FS 81, FS 86, FS 96, FS 106, FS 160, FS 180: handlebar support and sleeve selection.

Part numbers (4)
  • 4126 791 7610 — Original handlebar supportoriginal · FS 74, FS 76, FS 81, FS 86, FS 96, FS 106, FS 160, FS 180: handlebar support and sleeve selection
  • 4126 791 7611 — Modified handlebar supportreplacement · FS 74, FS 76, FS 81, FS 86, FS 96, FS 106, FS 160, FS 180: handlebar support and sleeve selection
  • 4121 791 7200 — Required sleeve only for the listed 24mm drive tubesconditional-component · FS 74, FS 76, FS 81, FS 86, FS 96, FS 106, FS 160, FS 180: handlebar support and sleeve selection
  • 4133 007 1010 — Section9 FS74/76 bike-handle kit, not all table modelskit · FS 74, FS 76, FS 81, FS 86, FS 96, FS 106, FS 160, FS 180: handlebar support and sleeve selection

Wrong number or missing part for the FS 96? Report a correction →