Stihl 4119 · Section C · 3 of 18 · 33 parts
Ignition system, Clutch
Fits FS 160, FS 180.
Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.
Parts (33)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4119 400 1201 | Flywheel Fitment / change note → | 1 |
| 2 | 9210 261 1140 | Hexagon nut M8x1 | 1 |
| 3 | 0000 400 1306 | Ignition module Fitment / change note → | 1 |
| 4 | not sold separately | Ignition lead 290 mm not available as a separate item | 1 |
| 5 | 0000 998 0603 | Torsion spring → replaced by 0000 998 0604 TI 30/1995 | 1 |
| 6 | 1106 405 1000 | Spark plug boot → replaced by 1128 405 1000, 1128 405 1000 TI 30/1995 | 1 |
| 7 | 9291 021 0121 | Washer 5.3 | 2 |
| 8 | 9022 371 0710 | Spline screw IS-M4x20 | 2 |
| 9 | 4119 405 1900 | Retainer | 1 |
| 10 | 4119 440 1107 | Short circuit wire | 1 |
| 11 | 0751 030 8958 | Terminal socket 4.8-1 no longer available from factory | 1 |
| 12 | 0751 030 8950 NLA | Terminal socket A 4-1 no longer available from factory | 1 |
| 13 | 0751 030 8470 | Grommet no longer available from factory | 1 |
| 14 | 0000 448 1203 | Lead retainer | 1 |
| 15 | 0000 448 1200 | Lead retainer | 1 |
| 16 | 4119 160 2906 | Clutch drum | 1 |
| 17 | 4119 160 2001 | Clutch Fitment / change note → | 1 |
| 18 | 0000 997 6205 | Tension spring Fitment / change note → | 1 |
| 19 | 0000 961 0505 | Ring | 2 |
| 20 | 0000 958 0609 | Washer | 4 |
| 21 | 9022 341 1350 | Spline screw IS-M6x25 | 2 |
| 22 | 4119 149 0600 | Muffler gasket | 1 |
| 23 | 4119 140 0605 | Muffler | 1 |
| 24 | 4119 140 0600 NLA | Muffler | 1 |
| 25 | 4119 141 9000 NLA | Screen | 1 |
| 26 | 4119 145 3000 NLA | Screen frame | 1 |
| 27 | 9099 021 0810 | Self-tapping screw 4.2x9.5 | 2 |
| 28 | 9307 021 0120 | Washer 5.3 | 2 |
| 29 | 9022 341 1150 | Spline screw IS-M5x65 | 2 |
| 30 | 9099 021 2330 NLA | Self-tapping screw 3.5x6.5 | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 0000 405 0600 NLA | Ignition lead 1 m option | 1 |
| — | 0000 930 2251 | Ignition lead 10 m option | 1 |
| — | 0751 010 1110 | Lead 10 m / 33' option | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Historical fitment · FS 160 / FS 180 / FS 220 / FS 280
FS 160 / FS 180 / FS 220 / FS 280: series 4119 replacement ignition assignment
0000 400 1306 with flywheel 4119 400 1201; 290 mm ignition lead.
- Printed series 4119. Use 0000 400 1306 with flywheel 4119 400 1201.
- Printed ignition-lead length: 290 mm (11 7/16 in). Preserve both printed units.
- TI01/1999 lists replacement combinations for the then-current machines, not every earlier configuration. Older machines are referred to Spare Parts for Previous Models in their own illustrated parts lists; no serial cutoff is supplied here.
- Use only the listed ignition-module/flywheel combinations. The source warns that incorrect combinations can cause excessive RPM or running in reverse; sharing a module number does not make all flywheels interchangeable.
- Universal replacement modules may differ from production modules in maker, shape and part number. The source describes installation/function compatibility within its assignments, not universal compatibility or a project hardware test.
- Some replacement modules require shortening the ignition lead and/or short-circuit wire and crimping a different short-circuit connector. The table gives ignition-lead lengths only; it supplies neither a short-circuit-wire length nor a connector part number. Do not infer that every row needs modification.
- Only the named models and printed series are covered. A shared IPL sheet does not extend this assignment to unnamed models or modern MS equivalents. This 1999 USA bulletin is historical guidance, not current availability.
Source: TI 1/1999, p. 1 · TI 1/1999, p. 3 — 1.1 general restrictions and 1.2.2 power-tool assignments.
Part numbers (2)
- 0000 400 1306 — Replacement ignition moduleAssigned component · FS 160 / FS 180 / FS 220 / FS 280, printed series 4119, listed combination only
- 4119 400 1201 — Assigned flywheelRequired pairing · FS 160 / FS 180 / FS 220 / FS 280, printed series 4119
Service note · FS 160 / FS 180 / FS 220 / FS 280
FS 160 / 180 / 220 / 280: new clutch and smaller drum must stay paired
Unlined clutch shoes require the new drum; replacement assembly includes both.
X 28 469 096 — Printed introduction for this component only; not a universal machine cutoff or interchange guarantee.
- From X 28 469 096, clutch 4119 160 2001 has shoes WITHOUT linings and is paired with a new drum of smaller inside diameter. Original and new versions CANNOT be combined. New clutch-with-drum assembly 4119 160 2050 includes items 1–3; clutch item 1 includes unchanged spring 0000 997 6205 (item 2). No drum bore dimension is printed.
- Original drum 4119 160 2905 is no longer factory-available, so use the complete new assembly to replace it. The new drum (item 3, printed -*- rather than an order number) is NOT separately available up to the end of 1998. No later separate-drum number is supplied here.
- Original clutch 4119 160 2000 remains available for older machines up to END OF 1998; after that date the new clutch AND new drum must be used. This is a historical supply timeline, not current stock evidence. All other parts remain as before. Cover scope does not silently include FS 290, FR 220 or K variants sharing an IPL sheet.
- Historical TI 15/1994 guidance for the explicitly named models only; no successor or unlisted variant applicability inferred. Factory supply statements are historical, not current stock claims. MOQ columns are order quantities, not fitting quantities. No physical interchange test was performed.
Source: TI 15/1994, p. 1 — FS 160 / 180 / 220 / 280: new clutch and smaller drum must stay paired.
Part numbers (5)
- 4119 160 2000 — Original lined clutchhistorically available through end of 1998 · FS 160 / 180 / 220 / 280: new clutch and smaller drum must stay paired
- 4119 160 2001 — New unlined clutch, item 1requires matching new drum · FS 160 / 180 / 220 / 280: new clutch and smaller drum must stay paired
- 4119 160 2050 — Clutch with drum, items 1–3complete replacement assembly · FS 160 / 180 / 220 / 280: new clutch and smaller drum must stay paired
- 0000 997 6205 — Clutch spring, item 2unchanged; included in clutch · FS 160 / 180 / 220 / 280: new clutch and smaller drum must stay paired
- 4119 160 2905 — Original clutch drum, item 3no longer factory-available · FS 160 / 180 / 220 / 280: new clutch and smaller drum must stay paired
Wrong number or missing part for the FS 160, FS 180? Report a correction →