← Brushcutters & other equipment · series 4119

Stihl 4119 · Section M · 11 of 18 · 38 parts

Loop handle

Fits FS 160, FS 180.

Parts diagrams →

Historical fitment & changes (3) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
11101112131314151617181922021222324252627282933304441424344454555556789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (38)

PosPart numberDescriptionQty
1 4130 790 1315 Loop handle 1
2 4130 790 8450 Barrier bar 1
3 9222 068 0900 Square nut M6 2
4 9022 341 1370 Spline screw IS-M6x30 2
5 4123 791 7400 Clamp 2
6 9291 021 0140 Washer 6.4 2
7 9022 341 1350 Spline screw IS-M6x25 2
8 4126 791 0821 Handle molding, outer 1
9 4126 182 4506 Torsion spring 1
10 4126 182 0806 Lockout lever 1
11 4126 182 6210 Collar screw 1
12 4126 790 1102 Handle molding, inner 1
13 4126 791 5300 Connector tag 2
14 4126 182 1705 Slide control 1
15 4126 182 4705 Detent spring 1
16 4126 182 6205 Collar screw 1
17 4126 182 4505 Torsion spring 1
18 9417 003 7510 Push nut 1
19 4126 182 1007 Throttle trigger 1
20 4126 182 4507 Torsion spring 1
21 4126 791 9400 Hose clamp 2
22 4126 792 6100 Square washer 4
23 9022 341 0980 Spline screw IS-M5x16 2
24 9074 478 3065 Pan head self-tapping screw IS-P4x19 4
25 4119 180 1105 Throttle cable 1
26 not sold separately Lead 540 mm / 21.3'' 1
27 not sold separately Lead 640 mm / 25.2'' 1
28 0751 030 8953 NLA Terminal socket 4.8-1 no longer available from factory 2
29 0751 030 8454 Spade terminal no longer available from factory 2
30 not sold separately Hose 270 mm / 10 5/8'' 1
41 4126 791 2001 Handle hose 1
42 4133 791 7610 Support Fitment / change note → 1
43 4133 791 0900 Clamp Fitment / change note → 1
44 4133 791 0905 Clamp Fitment / change note → 1
45 9022 341 1350 Spline screw IS-M6x25 6
Not numbered on the diagram — assemblies, kits and options
— 4133 790 1301 Control handle Fitment / change note → 1
— 0751 010 1110 Lead 10 m / 33' 1
— 4203 711 7201 Hose 960 mm / 37 13/16'' option 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Conditional replacement · FS 160 / FS 180

FS160/180 handlebar support: temporary number and standardization

Identically shaped support and clamps receive new numbers; the temporary 4126 791 7611 support is also replaced.

  • The TI states this standardization applies to ALL VERSIONS of FS160 and FS180: handlebar support plus top and bottom clamps have IDENTICAL SHAPE to the originals but different part numbers. This does not extend to every machine using a same-looking handlebar.
  • Handlebar support 4126 791 7610 → 4133 791 7610. For a TEMPORARY PERIOD support 4126 791 7611 was supplied instead of 7610; that temporary version is ALSO deleted and replaced by 4133 791 7610. Do not collapse the interim number out of the service history.
  • Clamp 4126 791 0601 → 4133 791 0900 and clamp 4126 791 0605 → 4133 791 0905. The table does not assign top/bottom to individual number rows, so that orientation is not invented. New parts have MOQ 1. Introduction is IN PROGRESS; original parts are supplied only while factory stocks last. No serial, torque or special tool is specified.
  • Later exact-model historical handlebar sheet shows new support/clamps at keys 1/2/3; loop-handle sheet retains them at keys 42/43/44. Another later handlebar arrangement uses different parts, so the TI statement is retained as historical, not universal across future redesigns. Its sheet title serial/TI25.2001 annotation is not backfilled into this 1995 changeover.
  • Footer: last TI on FS160/180/220/280 is 15.94, a bibliographic pointer, not a missing prerequisite for this self-contained bulletin. Waiblingen, February 27, 1995; Andreas Stihl D1/MTK-sc, Technical Documentation. Issue 16.95 is not a month or a production-date range.
  • Historical TI guidance for the explicitly named models and stated versions only. Shared IPL sheets are navigation, not an extension to every listed variant or proof of unrestricted interchange. Supply statements are historical, not current stock guarantees. No hardware operation was performed.

Source: TI 16/1995, p. 4 — Section 5: handlebar support/clamps, temporary number, table, remarks and footer.

Part numbers (7)
  • 4126 791 7610 — Original handlebar supportold stock only · FS 160; FS 180
  • 4126 791 7611 — Temporary handlebar supportinterim replacement; also deleted · FS 160; FS 180
  • 4133 791 7610 — Standardized handlebar supportreplaces original and interim; MOQ 1 · FS 160; FS 180
  • 4126 791 0601 — Original clamp, first rowold stock only · FS 160; FS 180
  • 4133 791 0900 — Standardized clamp, first rownew; MOQ 1 · FS 160; FS 180
  • 4126 791 0605 — Original clamp, second rowold stock only · FS 160; FS 180
  • 4133 791 0905 — Standardized clamp, second rownew; MOQ 1 · FS 160; FS 180

Conditional replacement · FS 160

FS 160 R: replacement loop versus production barrier handle

Original and new handle assignments retain production, replacement and variant restrictions.

  • FS 160 R (source series 4119) has TWO rows: original metal handle 3 → handle 6, –/X, remark 2 for older-machine replacement; original handle 3 → handle 7, X/X, remark 3. Unlike FS 74/76/88/108, its production row does not list a choice of 6 OR 7.
  • Both rows name tube item 38: 4119 710 7107 → 4119 710 7108. Page 5 remark 3 applies the NEW tube to production and replacement, also bike-handle machines. Section 6 remark 14 retains the ORIGINAL tube as spare for older LOOP-HANDLE machines.
  • Former metal handle 3 (4126 790 3400) is supplied only while factory stocks last. Shared FS 180 sheet is navigation only, not an FS 180 assignment from this matrix.
  • Page 5 A refers to the handle figure on page 4 AND the matching item in section 6; B is a drive-tube item number, not a diameter or complete assembly part number. X/X means standard production AND replacement; –/X means replacement only. Blank tube-number cells with remark 1 mean new instruction label with the SAME tube number, not removal of the tube.
  • New handle 6 is 4130 790 1316. Handle 7 is NOT available as a separate item: use handle 6 plus barrier bar 30 (4130 791 4400). Neither assembly choice alone authorizes a cutting tool: the page 2 blade/barrier/universal-deflector restrictions still apply.
  • The printed source is December 21, 1995; introduction is in progress with mixed inventories, not a serial cutoff or proof of installed revision. Catalog title says New Zealand only while the printed matrix includes Southeast Asia; territory discrepancy retained. Historical TI 39/1995 guidance, not current stock or verified physical interchange. No hardware operation was performed.
  • Exact-model IPL navigation only; shared-sheet companion models are NOT added to the source assignment. Printed source series identifiers are retained separately from catalog navigation series.

Source: TI 39/1995, p. 4 · TI 39/1995, p. 5 · TI 39/1995, p. 6 · TI 39/1995, p. 7 · TI 39/1995, p. 8 — Section 5, FS 160 R: replacement loop versus production barrier handle; section 6 row/remark joins.

Part numbers (5)
  • 4126 790 3400 — Former metal handle 3Source matrix/table component; restrictions in conditions · FS 160 R: replacement loop versus production barrier handle
  • 4130 790 1316 — New loop handle 6Source matrix/table component; restrictions in conditions · FS 160 R: replacement loop versus production barrier handle
  • 4130 791 4400 — Barrier bar 30; combine with handle 6 for form 7Source matrix/table component; restrictions in conditions · FS 160 R: replacement loop versus production barrier handle
  • 4119 710 7107 — Former tube item 38Source matrix/table component; restrictions in conditions · FS 160 R: replacement loop versus production barrier handle
  • 4119 710 7108 — New tube item 38Source matrix/table component; restrictions in conditions · FS 160 R: replacement loop versus production barrier handle

Service note · FS 160

FS 160: bike-to-loop kit 4119 007 1023

Historical model, tube diameter and included-handle distinctions remain explicit.

  • Item 43 includes metal loop handle 3 (4126 790 3400) AND complete control handle 44 (4133 790 1301). No kit diameter is stated on this row; do not infer it from another kit. Item 44 has the SAME number in original and new columns; the kit stock limit does not assert withdrawal of that control handle.
  • Original bike-handle-to-loop conversion kit supplied only while factory stocks last (remark 4). Section 2 says NO NEW VERSIONS of these kits will be offered; future conversions use individual handle components. This is not withdrawal of accessory kit 4130 007 1030.
  • The printed inclusion is not an exhaustive kit bill of materials: remark 16 refers component parts to the parts list for the machine concerned. Retained 01-2012 IPLs are later references, not established 1995 kit-content evidence. Do not fill the historical kit from neighboring drawing rows.
  • Historical TI 39/1995 guidance dated December 21, 1995, not current stock or verified physical interchange. No hardware operation was performed.
  • Exact-model IPL links are navigation only, not a verified 1995 kit bill of materials. Shared sheets do NOT add FS 62, FS 72 or FS 180 to these kit assignments. Catalog title New Zealand only conflicts with the printed cover and Southeast Asia matrix entries; territory discrepancy retained.

Source: TI 39/1995, p. 3 · TI 39/1995, p. 7 · TI 39/1995, p. 8 — Section 6, FS 160: bike-to-loop kit 4119 007 1023; section 2 stock limits and component-table joins.

Part numbers (3)
  • 4119 007 1023 — Original bike-to-loop conversion kitTI-listed kit or included component; restrictions in conditions · FS 160: bike-to-loop kit 4119 007 1023
  • 4126 790 3400 — Included metal loop handle, item 3TI-listed kit or included component; restrictions in conditions · FS 160: bike-to-loop kit 4119 007 1023
  • 4133 790 1301 — Included complete control handle, item 44TI-listed kit or included component; restrictions in conditions · FS 160: bike-to-loop kit 4119 007 1023

Wrong number or missing part for the FS 160, FS 180? Report a correction →