← Brushcutters & other equipment · series 4119

Stihl 4119 · Section L · 10 of 18 · 37 parts

Two-handed handle bar, Control handle 3 50 609 047 (25.2001)

Fits FS 160, FS 180.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131415161718191922020212223242526272829293303244404142567899
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (37)

PosPart numberDescriptionQty
1 4133 791 7610 Support Fitment / change note → 1
2 4133 791 0900 Clamp Fitment / change note → 1
3 4133 791 0905 Clamp Fitment / change note → 1
4 9022 341 1350 Spline screw IS-M6x25 6
5 4126 791 1700 Two-handed handle bar 1
6 4126 791 0801 Handle molding, outer 1
7 4126 182 4506 Torsion spring 1
8 4126 182 0800 Lockout lever 1
9 4126 182 6210 Collar screw 2
10 4126 791 0811 Handle molding, inner 1
11 4126 182 1700 Slide control 1
12 4126 182 4700 Detent spring 1
13 4126 182 6200 Collar screw 1
14 4126 442 1600 Contact spring 1
15 4126 182 4500 Torsion spring 1
16 4126 182 1001 Throttle trigger 1
17 4126 442 1610 Contact spring 1
18 9099 021 1890 Self-tapping screw 2.9x25 5
19 9210 260 0700 Hexagon nut M5 2
20 9022 341 1070 Spline screw IS-M5x30 2
21 4119 180 1100 Throttle cable → replaced by 4119 180 1101 TI 20/2002 1
22 not sold separately Lead 990 mm / 39'' 1
23 not sold separately Lead 1020 mm / 40.2'' 1
24 0751 030 8454 Spade terminal no longer available from factory 2
25 0751 030 8957 Terminal socket 4.8-1/0.8 no longer available from factory 2
26 0751 030 8470 Grommet no longer available from factory 2
27 not sold separately Hose 820 mm / 32 5/16'' 1
28 4119 182 2110 Support 1
29 4126 790 1350 Handle, left 1
30 9099 021 1890 Self-tapping screw 2.9x25 2
32 9022 341 1260 Spline screw IS-M6x12 1
40 4126 791 0800 Handle molding, outer 1
41 4126 791 0810 Handle molding, inner no longer available from factory 1
42 4126 182 1000 Throttle trigger 1
Not numbered on the diagram — assemblies, kits and options
— 4126 790 1303 Control handle 1
— 0751 010 1110 Lead 10 m / 33' option 1
— 4203 711 7201 Hose 960 mm / 37 13/16'' 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Conditional replacement · FS 160 / FS 180

FS160/180 handlebar support: temporary number and standardization

Identically shaped support and clamps receive new numbers; the temporary 4126 791 7611 support is also replaced.

  • The TI states this standardization applies to ALL VERSIONS of FS160 and FS180: handlebar support plus top and bottom clamps have IDENTICAL SHAPE to the originals but different part numbers. This does not extend to every machine using a same-looking handlebar.
  • Handlebar support 4126 791 7610 → 4133 791 7610. For a TEMPORARY PERIOD support 4126 791 7611 was supplied instead of 7610; that temporary version is ALSO deleted and replaced by 4133 791 7610. Do not collapse the interim number out of the service history.
  • Clamp 4126 791 0601 → 4133 791 0900 and clamp 4126 791 0605 → 4133 791 0905. The table does not assign top/bottom to individual number rows, so that orientation is not invented. New parts have MOQ 1. Introduction is IN PROGRESS; original parts are supplied only while factory stocks last. No serial, torque or special tool is specified.
  • Later exact-model historical handlebar sheet shows new support/clamps at keys 1/2/3; loop-handle sheet retains them at keys 42/43/44. Another later handlebar arrangement uses different parts, so the TI statement is retained as historical, not universal across future redesigns. Its sheet title serial/TI25.2001 annotation is not backfilled into this 1995 changeover.
  • Footer: last TI on FS160/180/220/280 is 15.94, a bibliographic pointer, not a missing prerequisite for this self-contained bulletin. Waiblingen, February 27, 1995; Andreas Stihl D1/MTK-sc, Technical Documentation. Issue 16.95 is not a month or a production-date range.
  • Historical TI guidance for the explicitly named models and stated versions only. Shared IPL sheets are navigation, not an extension to every listed variant or proof of unrestricted interchange. Supply statements are historical, not current stock guarantees. No hardware operation was performed.

Source: TI 16/1995, p. 4 — Section 5: handlebar support/clamps, temporary number, table, remarks and footer.

Part numbers (7)
  • 4126 791 7610 — Original handlebar supportold stock only · FS 160; FS 180
  • 4126 791 7611 — Temporary handlebar supportinterim replacement; also deleted · FS 160; FS 180
  • 4133 791 7610 — Standardized handlebar supportreplaces original and interim; MOQ 1 · FS 160; FS 180
  • 4126 791 0601 — Original clamp, first rowold stock only · FS 160; FS 180
  • 4133 791 0900 — Standardized clamp, first rownew; MOQ 1 · FS 160; FS 180
  • 4126 791 0605 — Original clamp, second rowold stock only · FS 160; FS 180
  • 4133 791 0905 — Standardized clamp, second rownew; MOQ 1 · FS 160; FS 180

Wrong number or missing part for the FS 160, FS 180? Report a correction →