Stihl 4119 · Section P · 14 of 18 · 29 parts
Gear head 3 50 609 047 (25.2001)
Fits FS 160, FS 180.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (29)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4119 640 0506 | Gear housing Fitment / change note → | 1 |
| 3 | 9455 621 0850 | Circlip 10x1 | 1 |
| 4 | 9456 621 2960 | Circlip 26x1.2 | 1 |
| 5 | 9503 003 5090 | Grooved ball bearing 6000-2RS | 1 |
| 6 | 9503 003 0100 | Grooved ball bearing 6000 | 2 |
| 7 | not sold separately | Drive pinion not available as a separate item | 1 |
| 8 | not sold separately | Spur bevel gear not available as a separate item | 1 |
| 9 | 4119 642 0606 | Drive shaft | 1 |
| 10 | 9503 003 5290 | Grooved ball bearing 6002-2RS | 1 |
| 11 | 9456 621 3600 | Circlip 32x1.2 | 1 |
| 12 | 4119 713 6500 | Screw plug | 1 |
| 13 | 9022 371 1020 | Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 | 2 |
| 14 | 4119 717 2806 | Guard ring | 1 |
| 15 | 4119 717 2807 | Guard ring | 1 |
| 16 | 4119 717 3100 | Cover plate | 1 |
| 17 | 9022 313 0930 | Spline screw IS-M5x8 | 2 |
| 18 | 4116 710 3800 | Thrust plate Ø 60 mm / 2 3/8" | 1 |
| 19 | 4116 717 2800 | Guard washer Ø 60 mm / 2 3/8'' | 1 |
| 20 | 4119 717 2800 | Guard washer | 1 |
| 21 | 4116 713 1600 | Thrust washer Ø 60 mm / 2 3/8" | 1 |
| 22 | 4116 713 3100 | Rider plate | 1 |
| 23 | 4119 713 3100 | Rider plate | 1 |
| 24 | 4119 642 7600 | Collar nut M12x1.5 l/h thread | 1 |
| 25 | 0781 120 1117 | Gear lubricant 80 g option | 1 |
| 31 | 4117 642 8200 | E-clip no longer available from factory | 1 |
| 32 | 9022 341 0950 | Spline screw IS-M5x10 | 1 |
| 33 | 0000 958 0503 | Washer Fitment / change note → | 2 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 4119 640 0107 | Gearhead Fitment / change note → | 1 |
| — | 4117 640 7300 | Set of pinions | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Historical fitment · FS 160 / FS 180
FS 160 / FS 180: same-number aluminum gearhead
The cast >AL< mark identifies the changed housing; two clamp-slot washers are deleted only with the new construction.
X 33 829 391 — Aluminum gearhead/housing introduced for FS 160 / FS 180; not a new part-number or later IPL boundary.
- From machine number X 33 829 391, FS 160 / FS 180 gearhead housings change from magnesium alloy to aluminum. The clamp area is modified for increased strength; this is the source claim, not a measured strength result.
- Gearhead 4119 640 0107 includes gear housing 4119 640 0506. Both ordering numbers remain unchanged across the revision. The aluminum housing is identified by integrally cast letters >AL<; a part-number match alone does not identify its material or clamp configuration.
- The two washers 0000 958 0503 previously fitted in the clamp slot are no longer required with the modified housing and are deleted from the new construction. The original housings included these washers. This is not permission to remove washers from an original magnesium housing.
- Only the modified gearhead and housing versions were available from the factory in this dated bulletin. The washers remained available as spares for older machines; this is historical availability, not a current-stock statement.
- The linked IPL sheet includes later model/serial labels; those labels are not this bulletin's introduction boundary. No FS 290, K-version or FR 220 extension, assembly torque or blanket cross-model gearhead interchange is inferred.
Source: TI 31/1996, p. 1 — Section1 complete text, summary inclusion rows and both supply remarks.
Part numbers (3)
- 4119 640 0107 — GearheadSame number, changed construction · FS 160 / FS 180
- 4119 640 0506 — Gear housingSame number; >AL< identifies aluminum · FS 160 / FS 180
- 0000 958 0503 — Washer, twoDeleted for modified clamp; retained spare · Original magnesium-housing configuration
Wrong number or missing part for the FS 160, FS 180? Report a correction →