Stihl 4126 · Section H · 8 of 15 · 40 parts
Two-handed handle bar
Fits FS 106.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (40)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4133 791 7610 | Support | 1 |
| 2 | 4133 791 0900 | Clamp | 1 |
| 3 | 4133 791 0905 | Clamp | 1 |
| 4 | 9022 341 1350 | Spline screw IS-M6x25 | 6 |
| 5 | 4126 791 1700 | Two-handed handle bar | 1 |
| 6 | 4126 791 0801 | Handle molding, outer | 1 |
| 7 | 4126 182 4506 | Torsion spring | 1 |
| 8 | 4126 182 0800 | Lockout lever | 1 |
| 9 | 4126 182 6210 | Collar screw | 1 |
| 10 | 4126 791 0811 | Handle molding, inner | 1 |
| 11 | 4126 182 1700 | Slide control | 1 |
| 12 | 4126 182 4700 | Detent spring | 1 |
| 13 | 4126 182 6200 | Collar screw | 1 |
| 14 | 4126 442 1600 | Contact spring | 1 |
| 15 | 4126 182 6210 | Collar screw | 1 |
| 16 | 4126 182 4500 | Torsion spring | 1 |
| 17 | 4126 182 1001 | Throttle trigger | 1 |
| 18 | 4126 442 1610 | Contact spring | 1 |
| 19 | 4126 180 1110 | Throttle cable | 1 |
| 20 | 9208 260 0900 | Hexagon nut M6 | 2 |
| 21 | not sold separately | Lead 1170 mm / 46.1'' not available as a separate item | 1 |
| 22 | not sold separately | Lead 1235 mm / 48.6'' not available as a separate item | 1 |
| 23 | 0751 030 8487 | Round plug no longer available from factory | 1 |
| 24 | 0751 030 8953 NLA | Terminal socket 4.8-1 no longer available from factory | 3 |
| 25 | 0751 030 8470 | Grommet no longer available from factory | 3 |
| 26 | 4203 711 7201 | Hose 960 mm / 37 13/16'' | 1 |
| 27 | 9099 021 1890 | Self-tapping screw 2.9x25 | 5 |
| 28 | 9210 260 0700 | Hexagon nut M5 | 3 |
| 29 | 9022 346 1070 | Spline screw IS-M5x30 | 3 |
| 30 | 4126 790 1350 | Handle, left | 1 |
| 31 | 9099 021 1890 | Self-tapping screw 2.9x25 | 2 |
| 32 | 4119 182 2110 | Support | 2 |
| 40 | 4126 791 0800 | Handle molding, outer | 1 |
| 41 | 4126 791 0810 | Handle molding, inner | 1 |
| 42 | 4126 182 1000 | Throttle trigger | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 4126 007 1009 | Bike handle kit | 1 |
| — | 4126 007 1010 | Bike handle kit | 1 |
| — | 4126 791 1701 | Two-handed handle bar not illustrated | 1 |
| — | 4126 790 1303 | Control handle | 1 |
| — | 0751 010 1110 | Lead 10 m / 33' not illustratedoption | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · FS 74 / FS 76 / FS 81 / FS 86 / FS 96 / FS 106 / FS 160 / FS 180
FS 74, FS 76, FS 81, FS 86, FS 96, FS 106, FS 160, FS 180: handlebar support and sleeve selection
4126 791 7610 → 4126 791 7611; 24mm tubes require sleeve 4121 791 7200.
- Modified support 4126 791 7611 (item4) replaces 4126 791 7610 for 25.4 mm (1 in) and 26 mm (approximately 1 1/16 in) drive tubes. For 24 mm (approximately 15/16 in) tubes, fit sleeve 4121 791 7200 (item5). The scan clearly prints 1 1/16, not 11/16; extracted text lost the space.
- Exact assignment table: FS 76 and FS 81 have 24 mm tubes, sleeve REQUIRED; FS 74 has 25.4 mm, NO sleeve; FS 86, FS 96, FS 106, FS 160 and FS 180 have 26 mm, NO sleeve. These are the listed historical bike-handle configurations, not a universal specification for every variant bearing those model names.
- Introduction is in progress. Original support stock is supplied only until exhausted. The support is included in bike-handle kit 4133 007 1010, whose unmodified stock is also supplied until exhausted; this kit reference belongs to section9 FS 74/76, not an asserted conversion kit for every model in the diameter table.
- The figure shows the support and sleeve together with the surrounding clamp pieces. No new part number for those other pieces or clamp torque is supplied; no measured physical fit test is claimed.
- Historical English TI01/1994, sections 5–10. Exact named models and the specified assembly are retained; no unlisted variants or current spare availability are inferred. No physical interchange test was performed.
Source: TI 1/1994, p. 10 · TI 1/1994, p. 11 — FS 74, FS 76, FS 81, FS 86, FS 96, FS 106, FS 160, FS 180: handlebar support and sleeve selection.
Part numbers (4)
- 4126 791 7610 — Original handlebar supportoriginal · FS 74, FS 76, FS 81, FS 86, FS 96, FS 106, FS 160, FS 180: handlebar support and sleeve selection
- 4126 791 7611 — Modified handlebar supportreplacement · FS 74, FS 76, FS 81, FS 86, FS 96, FS 106, FS 160, FS 180: handlebar support and sleeve selection
- 4121 791 7200 — Required sleeve only for the listed 24mm drive tubesconditional-component · FS 74, FS 76, FS 81, FS 86, FS 96, FS 106, FS 160, FS 180: handlebar support and sleeve selection
- 4133 007 1010 — Section9 FS74/76 bike-handle kit, not all table modelskit · FS 74, FS 76, FS 81, FS 86, FS 96, FS 106, FS 160, FS 180: handlebar support and sleeve selection
Wrong number or missing part for the FS 106? Report a correction →