Stihl 4126 · Section J · 9 of 15 · 43 parts
Loop handle
Fits FS 106.
Historical fitment & changes (3) — includes parts and conditions not shown on this drawing.
Parts (43)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4130 790 1315 | Loop handle | 1 |
| 2 | 4130 790 8450 | Barrier bar | 1 |
| 3 | 9222 068 0900 | Square nut M6 | 2 |
| 4 | 9022 341 1370 | Spline screw IS-M6x30 | 2 |
| 5 | 4123 791 7400 | Clamp | 2 |
| 6 | 9291 021 0140 | Washer 6.4 | 2 |
| 7 | 9022 341 1350 | Spline screw IS-M6x25 | 2 |
| 8 | 4117 710 7102 | Drive tube assembly Ø 26 mm / 1 1/16'' Fitment / change note → | 1 |
| 9 | 4117 711 3200 | Drive shaft | 1 |
| 10 | 4112 710 6701 | Hose clamp | 1 |
| 11 | 9022 341 1260 | Spline screw IS-M6x12 | 1 |
| 12 | 4126 791 0821 | Handle molding, outer | 1 |
| 13 | 4126 182 4506 | Torsion spring | 1 |
| 14 | 4126 182 0806 | Lockout lever Fitment / change note → | 1 |
| 15 | 4126 182 6210 | Collar screw | 1 |
| 16 | 4126 790 1102 | Handle molding, inner Fitment / change note → | 1 |
| 17 | 4126 791 5300 | Connector tag | 2 |
| 18 | 4126 182 1705 | Slide control | 1 |
| 19 | 4126 182 4705 | Detent spring | 1 |
| 20 | 4126 182 6205 | Collar screw | 1 |
| 21 | 4126 182 4505 | Torsion spring | 1 |
| 22 | 9417 003 7510 | Push nut | 1 |
| 23 | 4126 182 1007 | Throttle trigger Fitment / change note → | 1 |
| 24 | 4126 182 4507 | Torsion spring Fitment / change note → | 1 |
| 25 | 4126 791 9400 | Hose clamp | 2 |
| 26 | 4126 792 6100 | Square washer | 4 |
| 27 | 9022 341 0980 | Spline screw IS-M5x16 | 2 |
| 28 | 9074 478 3065 | Pan head self-tapping screw IS-P4x19 | 4 |
| 30 | 9208 260 0900 | Hexagon nut M6 | 2 |
| 31 | not sold separately | Lead 670 mm / 26.4'' not available as a separate item | 1 |
| 32 | not sold separately | Lead 820 mm / 32.3'' not available as a separate item | 1 |
| 33 | 0751 030 8487 | Round plug no longer available from factory | 1 |
| 34 | 0751 030 8953 NLA | Terminal socket 4.8-1 no longer available from factory | 3 |
| 35 | 0751 030 8470 | Grommet no longer available from factory | 3 |
| 36 | not sold separately | Hose 435 mm / 17 1/4'' not available as a separate item | 1 |
| 37 | 4119 182 2110 | Support | 2 |
| 50 | 4126 791 0820 | Handle molding, outer | 1 |
| 51 | 4126 182 1005 | Throttle trigger | 1 |
| 52 | not sold separately | Loop handle no longer available from factory | 1 |
| 53 | 4126 791 2001 | Handle hose | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 4133 790 1301 | Control handle Fitment / change note → | 1 |
| — | 0751 010 1110 | Lead 10 m / 33' not illustratedoption | 1 |
| — | 4203 711 7201 | Hose 960 mm / 37 13/16'' not illustratedoption | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · FS 72 / FS 74 / FS 86 / FS 96 / FS 106
FS 72, FS 74, FS 86, FS 96, FS 106: complete control-handle assignment
4133 790 1301 retains its number; page12 footnote4 specifies the five named models.
- Complete control handle 4133 790 1301 (item1) keeps its number and is assigned by footnote4 to FS 72, FS 74, FS 86, FS 96 and FS 106. Only the modified assembly is factory-available. FS 81 shares a catalog sheet with FS86 but is NOT in this source row; FS76 uses the separate4123 790 1313 assembly.
- The handle includes items3 and5–7: new inner molding4126 790 1102 (replaces4126 790 1101), additional spring4126 182 4507, new trigger4126 182 1007 and new interlock4126 182 0806. Original individual molding/trigger/interlock versions are no longer factory-available. Other parts remain as before.
- Page11 group restriction accompanies this table: a spring retrofit to an original handle requires the new trigger AND new inner molding together; original components cannot be installed individually in the modified handle. Control-half screws now2.5 Nm (1.8 lbf ft). No production thresholds are given for FS86, FS96 or FS106; do not copy the FS72/74/76 thresholds onto them.
- FS72 starts the control change at X 24 956 489 and FS74 at X 24 974 840. The separate conversion-kit footnotes assign4133 007 1011 to FS74 and4133 007 1020 to FS76; they do not establish conversion kits for every model in this complete-handle row.
- Historical English TI01/1994, sections 5–10. Exact named models and the specified assembly are retained; no unlisted variants or current spare availability are inferred. No physical interchange test was performed.
Source: TI 1/1994, p. 11 · TI 1/1994, p. 12 — FS 72, FS 74, FS 86, FS 96, FS 106: complete control-handle assignment.
Part numbers (6)
- 4133 790 1301 — Complete modified control handle; unchanged number, five named modelsunchanged-number · FS 72, FS 74, FS 86, FS 96, FS 106: complete control-handle assignment
- 4126 790 1101 — Original inner molding, item3original · FS 72, FS 74, FS 86, FS 96, FS 106: complete control-handle assignment
- 4126 790 1102 — New inner molding, item3included-component · FS 72, FS 74, FS 86, FS 96, FS 106: complete control-handle assignment
- 4126 182 4507 — Torsion spring, item5included-component · FS 72, FS 74, FS 86, FS 96, FS 106: complete control-handle assignment
- 4126 182 1007 — New trigger, item6included-component · FS 72, FS 74, FS 86, FS 96, FS 106: complete control-handle assignment
- 4126 182 0806 — New interlock, item7included-component · FS 72, FS 74, FS 86, FS 96, FS 106: complete control-handle assignment
Conditional replacement · FS 81 / FS 86 / FS 106
FS 81/86/106 R: metal-handle replacement and tube scope
Original and new handle assignments retain production, replacement and variant restrictions.
- All three rows replace former metal handle 3 (4126 790 3400) with handle 6, –/X. Original metal handle is supplied only while factory stocks last.
- FS 81 R: source series 4124, tube item 34 (4124 710 7102 → 4124 710 7103), page 5 remark 2 for older-machine replacement. FS 86 R: series 4126, tube 36; FS 106 R: series 4129, tube 36 (4117 710 7101 → 4117 710 7102). Their remark 4 covers older machines with BIKE AND LOOP handles.
- Section 6 remark 14 still limits original tube items 34/36 availability to older LOOP-HANDLE machines. Do not widen that original-stock statement to bike handles merely because page 5 describes replacement use for both.
- The catalog groups the exact FS 81/86 and FS 106 sheets under 4126; this navigation does not rewrite printed source series 4124 and 4129.
- Page 5 A refers to the handle figure on page 4 AND the matching item in section 6; B is a drive-tube item number, not a diameter or complete assembly part number. X/X means standard production AND replacement; –/X means replacement only. Blank tube-number cells with remark 1 mean new instruction label with the SAME tube number, not removal of the tube.
- New handle 6 is 4130 790 1316. Handle 7 is NOT available as a separate item: use handle 6 plus barrier bar 30 (4130 791 4400). Neither assembly choice alone authorizes a cutting tool: the page 2 blade/barrier/universal-deflector restrictions still apply.
- The printed source is December 21, 1995; introduction is in progress with mixed inventories, not a serial cutoff or proof of installed revision. Catalog title says New Zealand only while the printed matrix includes Southeast Asia; territory discrepancy retained. Historical TI 39/1995 guidance, not current stock or verified physical interchange. No hardware operation was performed.
- Exact-model IPL navigation only; shared-sheet companion models are NOT added to the source assignment. Printed source series identifiers are retained separately from catalog navigation series.
Source: TI 39/1995, p. 4 · TI 39/1995, p. 5 · TI 39/1995, p. 6 · TI 39/1995, p. 7 · TI 39/1995, p. 8 — Section 5, FS 81/86/106 R: metal-handle replacement and tube scope; section 6 row/remark joins.
Part numbers (6)
- 4126 790 3400 — Former metal handle 3Source matrix/table component; restrictions in conditions · FS 81/86/106 R: metal-handle replacement and tube scope
- 4130 790 1316 — New loop handle 6Source matrix/table component; restrictions in conditions · FS 81/86/106 R: metal-handle replacement and tube scope
- 4124 710 7102 — Former tube item 34Source matrix/table component; restrictions in conditions · FS 81/86/106 R: metal-handle replacement and tube scope
- 4124 710 7103 — New tube item 34Source matrix/table component; restrictions in conditions · FS 81/86/106 R: metal-handle replacement and tube scope
- 4117 710 7101 — Former tube item 36Source matrix/table component; restrictions in conditions · FS 81/86/106 R: metal-handle replacement and tube scope
- 4117 710 7102 — New tube item 36Source matrix/table component; restrictions in conditions · FS 81/86/106 R: metal-handle replacement and tube scope
Service note · FS 86 / FS 106 / FS 108
FS 86/106/108: 26 mm bike-to-loop kit 4126 007 1008
Historical model, tube diameter and included-handle distinctions remain explicit.
- Item 46 is for 26 mm (1.024 in) drive tubes on FS 86, FS 106 and FS 108; includes metal loop handle 3 (4126 790 3400). Do not assign the sleeve-only-for-24-mm rule to this 26 mm kit.
- Original bike-handle-to-loop conversion kit supplied only while factory stocks last (remark 4). Section 2 says NO NEW VERSIONS of these kits will be offered; future conversions use individual handle components. This is not withdrawal of accessory kit 4130 007 1030.
- The printed inclusion is not an exhaustive kit bill of materials: remark 16 refers component parts to the parts list for the machine concerned. Retained 01-2012 IPLs are later references, not established 1995 kit-content evidence. Do not fill the historical kit from neighboring drawing rows.
- Historical TI 39/1995 guidance dated December 21, 1995, not current stock or verified physical interchange. No hardware operation was performed.
- Exact-model IPL links are navigation only, not a verified 1995 kit bill of materials. Shared sheets do NOT add FS 62, FS 72 or FS 180 to these kit assignments. Catalog title New Zealand only conflicts with the printed cover and Southeast Asia matrix entries; territory discrepancy retained.
Source: TI 39/1995, p. 3 · TI 39/1995, p. 7 · TI 39/1995, p. 8 — Section 6, FS 86/106/108: 26 mm bike-to-loop kit 4126 007 1008; section 2 stock limits and component-table joins.
Part numbers (2)
- 4126 007 1008 — Original bike-to-loop conversion kitTI-listed kit or included component; restrictions in conditions · FS 86/106/108: 26 mm bike-to-loop kit 4126 007 1008
- 4126 790 3400 — Included metal loop handle, item 3TI-listed kit or included component; restrictions in conditions · FS 86/106/108: 26 mm bike-to-loop kit 4126 007 1008
Wrong number or missing part for the FS 106? Report a correction →