← FS 81, FS 86 · FS 88 · FS 106

Stihl 4126 · Section J · 9 of 14 · 34 parts

Two-handed handle bar

Fits FS 88.

Parts diagrams →

Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131415161718192202021212222232425262728293303131324556789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (34)

PosPart numberDescriptionQty
1 4121 791 7200 Sleeve 1
2 4133 791 7610 Support 1
3 4133 791 0900 Clamp 1
4 4133 791 0905 Clamp 1
5 9022 341 1350 Spline screw IS-M6x25 6
6 4126 791 1700 Two-handed handle bar 1
7 4126 791 0801 Handle molding, outer 1
8 4126 182 4506 Torsion spring 1
9 4126 182 0800 Lockout lever 1
10 4126 182 6210 Collar screw 1
11 4126 791 0811 Handle molding, inner 1
12 4126 182 1700 Slide control 1
13 4126 182 4700 Detent spring 1
14 4126 182 6200 Collar screw 1
15 4126 442 1600 Contact spring 1
16 4126 182 6210 Collar screw 1
17 4126 182 4500 Torsion spring 1
18 4126 182 1001 Throttle trigger 1
19 4126 442 1610 Contact spring 1
20 9099 021 1890 Self-tapping screw 2.9x25 5
21 9210 260 0700 Hexagon nut M5 2
22 9022 341 1070 Spline screw IS-M5x30 3
23 4135 180 1100 Throttle cable 1
24 not sold separately Lead 970 mm / 38.2'' not available as a separate item 1
25 not sold separately Lead 1020 mm / 40.2'' not available as a separate item 1
26 0751 030 8953 NLA Terminal socket 4.8-1 no longer available from factory 2
27 0751 030 8470 Grommet no longer available from factory 2
28 0751 030 8474 Terminal socket 4.8-1 no longer available from factory 2
29 0751 030 8460 Grommet no longer available from factory 2
30 4203 711 7201 Hose 960 mm / 37 13/16'' 1
31 4126 790 1350 Handle, left 1
32 4123 182 2100 Clamp 2
Not numbered on the diagram — assemblies, kits and options
— 4126 790 1303 Control handle 1
— 0751 010 1110 Lead 10 m / 33' not illustratedoption 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · FS 88 / FS 108

FS 88 / 108: filter stack, controls and isolation

Foam sits between the cover and felt; no tool is needed for the filter cover.

  • Diaphragm carburetor has a thermally insulated cylinder mounting. Air filter diagram: cover 3, foam element 1, felt element 2 toward the engine. Cover removal/refitting needs no tools. Fuel capacity 0.69 l (1.45 US pt); no mixture ratio or filter-part number printed here.
  • Control layout is described as FS 72, 74, 76, 86 and 106: throttle trigger lock 4, trigger 5, slide control 6. Starting-throttle, run and stop positions are selected with one hand. Illustration labels STOP, I and START; no bypass of the trigger lock is authorized.
  • Clutch shoes have linings and pivot on the flywheel. AV layout is described as FS 74/76, isolating vibration mainly to the engine. These comparisons do not establish universal control, clutch or AV-rubber interchange.
  • Historical TI 37/1994 source guidance, not present-day approval, current stock or a physical interchange test. No serial cutoff is supplied. Exact-model catalog links are navigation, not proof that later service parts or carburetor variants equal the original configuration. No hardware operation was performed.

Source: TI 37/1994, p. 1 · TI 37/1994, p. 3 · TI 37/1994, p. 5 — FS 88 / 108: filter stack, controls and isolation.

No additional parts-table entry added.

Service note · FS 88 / FS 108

FS 88 / 108: handle, drive and generic tightening torques

Specific rows override generic all-other M4/M5 entries.

  • Pairs are Nm / lbf.ft. Self-tapping B2.9x25, two halves of control handle and left handle: 2.0 / 1.5. IS-M 5x30 control handle and left handle to bike handle: 3.5 / 2.6. IS-P 4x19 two halves of loop handle: 2.0 / 1.5. IS-M 5x16 clamp on control handle (loop-handle version): 3.5 / 2.6.
  • IS-M 6x20 clamp screw in AV sleeve: 7.0 / 5.2. IS-M 5x20 gearhead clamp screws: 8.0 / 5.9. IS-M 6x25 lower clamp AND upper clamp to handle support: each 6.0 / 4.4.
  • IS-M 11x10 screw plug at gearhead grease filler: 10.0 / 7.4. IS-M 6x14 harness clamp: 4.5 / 3.3. IS-M 6x12 clamp on loop handle: 3.5 / 2.6. IS-M 4x12 setscrew in drive-tube sleeve: 3.0 / 2.2.
  • ALL OTHER screws/nuts M4: 2.5 / 1.8; M5: 4.5 / 3.3. These are not substitutes for listed component-specific values or the two explicitly unspecified clamp rows. No tool-mounting nut torque is supplied here.
  • Historical TI 37/1994 guidance, not current stock, a complete repair procedure or physical verification. Exact-model catalog links are navigation, not proof that later configurations are identical. No hardware operation was performed.

Source: TI 37/1994, p. 8 — handle, drive and generic tightening torques.

No additional parts-table entry added.

Wrong number or missing part for the FS 88? Report a correction →