← Edgers & other equipment · series 4130

Stihl 4130 · Section H · 8 of 14 · 35 parts

Drive tube assembly FS 40, FS 44

Fits FS 40, FS 44.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131415161718192202122232425262728293303132333435456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (35)

PosPart numberDescriptionQty
1 4130 161 0500 Clutch housing 1
2 4130 161 0501 Clutch housing 1
3 9075 478 4155 Pan head self-tapping screw IS-D5x24 4
4 4130 967 1500 Model plate FS 40 1
5 4130 967 1505 Model plate FS 44 1
6 4130 710 6701 Hose clamp 1
7 9022 341 1010 Spline screw IS-M5x18 1
8 9210 260 0700 Hexagon nut M5 1
9 4130 791 6810 Clamp 1
10 4130 710 7159 Drive tube assembly Ø 25.4 mm / 1'' 1
11 4130 710 7136 Drive tube assembly Ø 25.4 mm / 1'' 1
12 0000 967 3726 NLA Warning pictogram FS 1
13 0000 967 3659 NLA Warning pictogram FS 1
14 4137 711 3202 Drive shaft 1
15 4130 710 7160 Drive tube assembly Ø 25.4 mm / 1'' 1
16 4130 710 7138 Drive tube assembly Ø 25.4 mm / 1'' 1
17 4130 710 7137 Drive tube assembly Ø 25.4 mm / 1'' 1
18 0000 967 3725 Warning pictogram FS 1
19 0000 967 3684 Warning pictogram FS 1
20 0000 967 3659 NLA Warning pictogram FS 1
21 4140 711 3202 Drive shaft 1
22 4130 791 7600 Handlebar support 1
23 4130 791 2005 Handle hose 1
24 4130 182 1315 Handle molding, left 1
25 4130 182 1000 Throttle trigger 1
26 4130 182 4500 Torsion spring 1
27 4130 182 0805 Lockout lever 1
28 4130 182 0800 Lockout lever 1
29 0000 997 0715 Compression spring 1
30 4130 430 0200 Stop switch 1
31 4130 432 2010 Slide 1
32 4130 182 1310 Handle molding, right 1
33 9099 021 2810 Self-tapping screw 3.9x19 4
34 4140 007 1006 Hose clamp kit 1
35 9022 341 1270 Spline screw IS-M6x14 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · FS 40

FS 40: drive shaft standardized with the named FS 74 shaft

4133 711 3215 replaces 4130 711 3205 in the FS 40 application.

  • FS 40 drive shaft changes from 4130 711 3205 to 4133 711 3215 to standardize parts with FS 74. Source says the new shaft has been installed for some time and the table says introduction in progress; no serial supplied.
  • Original shaft is no longer factory-available. The explicit FS 74 reference explains the common new part, not a replacement claim for the original FS 40 shaft on FS 74; FS 36 and FS 44 are not admitted merely from the shared bulletin cover or IPL sheet.
  • Source identifier/header is TI17.94, retained as 1994-17, but the original footer says March 10, 1995 and copyright 1995. Preserve that discrepancy; do not silently change source year or equate publication and review dates.
  • Historical TI 17/1994 guidance for the explicitly named models only; no successor or unlisted variant applicability inferred. Factory supply statements are historical, not current stock claims. MOQ columns are order quantities, not fitting quantities. No physical interchange test was performed.

Source: TI 17/1994, p. 5 — FS 40: drive shaft standardized with the named FS 74 shaft.

Part numbers (2)
  • 4130 711 3205 — Original FS 40 drive shaftno longer factory-available · FS 40: drive shaft standardized with the named FS 74 shaft
  • 4133 711 3215 — New FS 40 drive shaftstandardized with FS 74 · FS 40: drive shaft standardized with the named FS 74 shaft

Wrong number or missing part for the FS 40, FS 44? Report a correction →