← Edgers & other equipment · series 4130

Stihl 4130 · Section K · 9 of 14 · 7 parts

Loop handle

Fits FS 36, FS 40, FS 44.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1123344555567
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (7)

PosPart numberDescriptionQty
1 4130 790 1315 Loop handle 1
2 4130 790 8450 Barrier bar 1
3 9222 068 0900 Square nut M6 2
4 9022 341 1370 Spline screw IS-M6x30 2
5 4123 791 7400 Clamp 2
6 9291 021 0140 Washer 6.4 2
7 9022 341 1350 Spline screw IS-M6x25 2

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Conditional replacement · FS 44

FS 44 R and J handle: distinct production replacements

Original and new handle assignments retain production, replacement and variant restrictions.

  • FS 44 R (source series 4130): original handle 2 → new handle 6, X/X. FS 44 with J handle (4130): original handle 5 → new handle 7, X/X. Both carry remark 1: tube label changes, tube part number unchanged.
  • Original handle 2 (4130 790 1300) remains available as spare for OTHER models (section 6 remark 2). Original J handle 5 (4130 790 1500) is supplied only while factory stocks last (remark 4). These different supply qualifications are not merged.
  • Page 4 silhouettes distinguish the straight-grip former loop 2, J handle 5, indented loop 6 and loop-plus-barrier 7. No dimensions are derived from silhouettes.
  • Page 5 A refers to the handle figure on page 4 AND the matching item in section 6; B is a drive-tube item number, not a diameter or complete assembly part number. X/X means standard production AND replacement; –/X means replacement only. Blank tube-number cells with remark 1 mean new instruction label with the SAME tube number, not removal of the tube.
  • New handle 6 is 4130 790 1316. Handle 7 is NOT available as a separate item: use handle 6 plus barrier bar 30 (4130 791 4400). Neither assembly choice alone authorizes a cutting tool: the page 2 blade/barrier/universal-deflector restrictions still apply.
  • The printed source is December 21, 1995; introduction is in progress with mixed inventories, not a serial cutoff or proof of installed revision. Catalog title says New Zealand only while the printed matrix includes Southeast Asia; territory discrepancy retained. Historical TI 39/1995 guidance, not current stock or verified physical interchange. No hardware operation was performed.
  • Exact-model IPL navigation only; shared-sheet companion models are NOT added to the source assignment. Printed source series identifiers are retained separately from catalog navigation series.

Source: TI 39/1995, p. 4 · TI 39/1995, p. 5 · TI 39/1995, p. 6 · TI 39/1995, p. 7 · TI 39/1995, p. 8 — Section 5, FS 44 R and J handle: distinct production replacements; section 6 row/remark joins.

Part numbers (4)
  • 4130 790 1300 — Former handle 2Source matrix/table component; restrictions in conditions · FS 44 R and J handle: distinct production replacements
  • 4130 790 1500 — Former J handle 5Source matrix/table component; restrictions in conditions · FS 44 R and J handle: distinct production replacements
  • 4130 790 1316 — New loop handle 6Source matrix/table component; restrictions in conditions · FS 44 R and J handle: distinct production replacements
  • 4130 791 4400 — Barrier bar 30; combine with handle 6 for form 7Source matrix/table component; restrictions in conditions · FS 44 R and J handle: distinct production replacements

Wrong number or missing part for the FS 36, FS 40, FS 44? Report a correction →