← Edgers & other equipment · series 4130

Stihl 4130 · Section L · 10 of 14 · 34 parts

Two-handed handlebar FS 44 F/D/SEA

Fits FS 44.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110111213141415151616171819220212223242526272829330314556789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (34)

PosPart numberDescriptionQty
1 4126 791 1700 Two-handed handle bar 1
2 4126 791 0801 Handle molding, outer 1
3 4126 182 4506 Torsion spring 1
4 4126 182 0800 Lockout lever 1
5 4126 182 6210 Collar screw 2
6 4126 791 0811 Handle molding, inner 1
7 4126 182 1700 Slide control 1
8 4126 182 4700 Detent spring 1
9 4126 182 6200 Collar screw 1
10 4126 442 1600 Contact spring 1
11 4126 182 4500 Torsion spring 1
12 4126 182 1001 Throttle trigger 1
13 4126 442 1610 Contact spring 1
14 9099 021 1890 Self-tapping screw 2.9x25 Fitment / change note → 5
15 9022 341 1070 Spline screw IS-M5x30 2
16 9210 260 0700 Hexagon nut M5 2
17 4130 180 1110 Throttle cable 1
18 not sold separately Short circuit wire 1100 mm / 43'' 1
19 not sold separately Short circuit wire 1130 mm / 44.5'' 1
20 0751 030 8454 Spade terminal no longer available from factory 1
21 0751 030 8404 Terminal socket 6.3-1 no longer available from factory 1
22 0751 030 8471 Grommet no longer available from factory 1
23 not sold separately Hose 720 mm / 28 3/8'' 1
24 not sold separately Handle molding, outer not available as a separate item 1
25 not sold separately Handle molding, inner not available as a separate item 1
26 4119 791 9400 Cable clamp 1
27 4130 791 0606 Clamp 1
28 4130 791 6800 Clamp 1
29 4130 791 0600 Clamp 1
30 9022 341 1380 Spline screw IS-M6x35 4
31 9210 319 0900 Hexagon nut M6 4
Not numbered on the diagram — assemblies, kits and options
— 0751 010 1110 Lead 10 m / 33' not illustratedoption 1
— 4203 711 7201 Hose 960 mm / 37 13/16'' not illustrated 1
— 4126 790 1350 Handle, left Fitment / change note → 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · FS 44

FS 44 bike handle: left-hand moldings replaced as complete assembly

New moldings are not separately supplied; old moldings last only while stocks do.

  • FS 44 WITH BIKE HANDLE only: complete left-hand handle 4126 790 1350 replaces separate outer molding 4126 791 0805 (1) and inner molding 4126 791 0815 (2). Original moldings remain supplied only while factory stocks last; revised moldings are NOT available separately (printed -*- is not an order number).
  • Complete handle comprises items 1–3, including TWO C2.9×25 self-tapping screws 9099 021 1890 (3), whose number is unchanged. All listed parts are also included in bike-handle kit 4133 007 1010; its unmodified version remains supplied until factory stocks are exhausted. Kit stock limit is separate from new molding assembly-only availability.
  • Introduction in progress, no serial; no loop-handle retrofit or other-model applicability is established. Previous TI32.92 is a pointer, not prior-source or whole-manual acceptance.
  • Source identifier/header is TI17.94, retained as 1994-17, but the original footer says March 10, 1995 and copyright 1995. Preserve that discrepancy; do not silently change source year or equate publication and review dates.
  • Historical TI 17/1994 guidance for the explicitly named models only; no successor or unlisted variant applicability inferred. Factory supply statements are historical, not current stock claims. MOQ columns are order quantities, not fitting quantities. No physical interchange test was performed.

Source: TI 17/1994, p. 6 · TI 17/1994, p. 7 — FS 44 bike handle: left-hand moldings replaced as complete assembly.

Part numbers (5)
  • 4126 790 1350 — Complete FS 44 left-hand handle, items 1–3new complete replacement · FS 44 bike handle: left-hand moldings replaced as complete assembly
  • 4126 791 0805 — Original outer handle molding, item 1while stocks last; revised assembly-only · FS 44 bike handle: left-hand moldings replaced as complete assembly
  • 4126 791 0815 — Original inner handle molding, item 2while stocks last; revised assembly-only · FS 44 bike handle: left-hand moldings replaced as complete assembly
  • 9099 021 1890 — C2.9×25 self-tapping screw, item 3unchanged; two fitted · FS 44 bike handle: left-hand moldings replaced as complete assembly
  • 4133 007 1010 — Bike-handle kitunmodified version while stocks last · FS 44 bike handle: left-hand moldings replaced as complete assembly

Wrong number or missing part for the FS 44? Report a correction →