← Edgers & other equipment · series 4130

Stihl 4130 · Section A · 1 of 2 · 8 parts

Drive tube assembly

Fits FSB-KM.

Parts diagrams →

Historical fitment & changes (3) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
12345678
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (8)

PosPart numberDescriptionQty
1 4137 710 7142 Drive tube assembly Ø 25.4 mm / 1'' 1
2 4137 710 7143 Drive tube assembly Ø 25.4 mm / 1'' 1
3 0000 967 3726 NLA Warning pictogram FS 1
4 0000 967 3659 NLA Warning pictogram FS 1
5 4137 710 3203 Drive shaft 1
6 4140 791 7201 Sleeve 1
7 4133 717 2000 Cap 1
8 0781 120 1110 Gear lubricant 225 g Fitment / change note → option 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · FSB-KM

FSB-KM: curved-tube identity and historical engine approvals

Only the explicitly listed powerheads are approved by this TI.

  • The cover names FSB-KM, series 4137, with a curved drive tube, low weight and small FS 75-derived deflector for mowing-head trimming in hard-to-reach areas. The retained exact-model FSB-KM IPL is filed under series 4130. Both labels are preserved: an exact model-name match permits navigation but does NOT prove the two series codes equivalent.
  • Section 2 permits ONLY KM 55 R, KM 85 R, KM 90 R and KM 110 R KombiEngines, plus split-drive-tube FS 55 RT, FS 83 RT and FS 85 RT brushcutters. No other KombiEngine combination is permitted by this source. The cover’s general T-model wording is constrained by this explicit list; it is not approval for every split-shaft machine.
  • The cover photograph identifies the curved-tube tool, not a dimensioned drawing or proof that every FS 75 component interchanges.
  • Historical English-USA 2007 source, not present-day stock or approval for unlisted variants. No numeric serial cutoff is supplied. No physical interchange test was performed.

Source: TI 52/2007, p. 1 · TI 52/2007, p. 2 — FSB-KM: curved-tube identity and historical engine approvals.

No additional parts-table entry added.

Service note · FSB-KM

FSB-KM: line sizes, PolyCut spares and shaft lubricant

The listed hedge-trimmer gear lubricant is applied to the drive-tube shaft.

  • Section 5.1 weight is 1.54 lb (0.7 kg) WITHOUT cutting tool and deflector, not assembled operating weight.
  • AutoCut 11-2 accessories: .080 inch diameter GREEN line, .095 inch diameter ORANGE line (both in different lengths), and prewound spool. Their order numbers are REFERRED to the Cutting Tools & Accessories for Brushcutters and Trimmers catalog, not printed here.
  • PolyCut 5-3: plastic blades, pack of 12 = 4111 007 1001; thrust plate = 4130 713 1501; stop pin = 4130 893 7800. Plastic blades do not contradict the metal-cutting-tool exclusion.
  • STIHL gear lubricant FOR HEDGE TRIMMERS is expressly listed for the SHAFT IN THE DRIVE TUBE: 3 oz / 80 g tube 0781 120 1109, or 8 oz / 225 g tube 0781 120 1110. These are package sizes, NOT doses to inject into the shaft; no lubrication interval or quantity per service is supplied.
  • Historical English-USA 2007 source, not present-day stock or approval for unlisted variants. No numeric serial cutoff is supplied. No physical interchange test was performed.

Source: TI 52/2007, p. 5 — FSB-KM: line sizes, PolyCut spares and shaft lubricant.

Part numbers (5)
  • 4111 007 1001 — Plastic blades, pack of 12PolyCut 5-3 · FSB-KM; source restrictions apply
  • 4130 713 1501 — Thrust platePolyCut 5-3 · FSB-KM; source restrictions apply
  • 4130 893 7800 — Stop pinPolyCut 5-3 · FSB-KM; source restrictions apply
  • 0781 120 1109 — Gear lubricant, 3 oz / 80 g tubeDrive-tube shaft · FSB-KM; source restrictions apply
  • 0781 120 1110 — Gear lubricant, 8 oz / 225 g tubeDrive-tube shaft · FSB-KM; source restrictions apply

Service note · FSB-KM

FSB-KM: catalog edition and FS 75 drive-tube repair allowances

References to manuals and labor times are not imported procedures or numeric times.

  • Printed/electronic FSB-KM parts lists are reported available. The ORIGINAL page 5 scan names STIHL service catalogue (DVD-ROM issue 01/2008), from issue 01/2008; the catalogue name is lost in the body extraction. This is a historical inclusion claim, not verification of a particular installation.
  • If the complete machine is started during repairs, section 8 requires ALL safety regulations and precautions in BOTH the FSB-KM and fitted KombiEngine instruction manuals. The KombiTools service manual is referenced for servicing and repair procedures.
  • FS 75 DRIVE-TUBE repair times may be used for FSB-KM, assuming TRAINED personnel in a PROPERLY EQUIPPED workshop. No numerical time is printed, and this does not transfer all FS 75 engine repair allowances or prove physical parts interchange.
  • The catalog/manual references are reviewed as reference statements only. Their complete procedures, accessory selection and numerical labor tables are not claimed recovered or whole-manual accepted by this TI review.
  • Historical English-USA 2007 source, not present-day stock or approval for unlisted variants. No numeric serial cutoff is supplied. No physical interchange test was performed.

Source: TI 52/2007, p. 5 · TI 52/2007, p. 6 — FSB-KM: catalog edition and FS 75 drive-tube repair allowances.

No additional parts-table entry added.

Wrong number or missing part for the FSB-KM? Report a correction →