← Edgers & other equipment · series 4133

Stihl 4133 · Section H · 7 of 9 · 26 parts

Handle

Fits FC 72.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110111213141415161718192202121222334566789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (26)

PosPart numberDescriptionQty
1 4126 791 0821 Handle molding, outer 1
2 4126 182 4506 Torsion spring 1
3 4126 182 0806 Lockout lever Fitment / change note → 1
4 4126 182 6210 Collar screw 1
5 4126 790 1102 Handle molding, inner Fitment / change note → 1
6 4126 791 5300 Connector tag 2
7 4126 182 1705 Slide control 1
8 4126 182 4705 Detent spring 1
9 4126 182 6205 Collar screw 1
10 4126 182 4505 Torsion spring 1
11 9417 003 7510 Push nut 1
12 4126 182 1007 Throttle trigger Fitment / change note → 1
13 4133 791 9400 Hose clamp 2
14 4126 792 6100 Square washer 4
15 9022 341 0980 Spline screw IS-M5x16 2
16 9074 478 3065 Pan head self-tapping screw IS-P4x19 4
17 4126 182 4507 Torsion spring Fitment / change note → 1
18 4133 180 1105 Throttle cable 1
19 not sold separately Lead 480 mm / 18.9'' 1
20 not sold separately Lead 565 mm / 22.2'' 1
21 0751 030 8953 NLA Terminal socket 4.8-1 no longer available from factory 4
22 0751 030 8470 Grommet no longer available from factory 3
23 not sold separately Hose 170 mm / 6 3/4'' 1
Not numbered on the diagram — assemblies, kits and options
— 4133 790 1301 Control handle Fitment / change note → 1
— 0751 010 1110 Lead 10 m / 33' not illustratedoption 1
— 4203 711 7201 Hose 960 mm / 37 13/16'' not illustratedoption 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Historical fitment · FC 72

FC 72: extra spring needs new trigger AND inner molding

Modified trigger, interlock and molding retrofit individually; additional spring has stricter prerequisites.

X 24 957 772 — FC 72 control-handle revision only.

  • From X 24 957 772, inner molding 4126 790 1101 → 4126 790 1102, trigger 4126 182 1006 → 4126 182 1007 and interlock 4126 182 0805 → 4126 182 0806 are modified; torsion spring 4126 182 4507 is added.
  • New interlock, trigger and inner molding can each be fitted individually to earlier FC 72 control handles. However, adding the torsion spring to an old handle requires BOTH the new trigger and new inner molding. Separate-item compatibility does not waive that spring prerequisite.
  • Complete handle retains number 4133 790 1301 and includes keys 1–4; only the modified assembly is available. Old molding, trigger and interlock are no longer supplied. No torque is given in this section.
  • Historical English TI05/1994, series 4133 FC 72 only. Shared-series catalog grouping and references to standardization do not extend these cutoffs or restrictions to other models. Historical availability is not current stock. MOQ columns are commercial order quantities, not installation counts. No physical interchange test was performed.

Source: TI 5/1994, p. 11 — extra spring needs new trigger AND inner molding.

Part numbers (8)
  • 4126 790 1101 — Inner handle moldingoriginal · FC 72 — extra spring needs new trigger AND inner molding
  • 4126 790 1102 — Inner handle moldingnew · FC 72 — extra spring needs new trigger AND inner molding
  • 4126 182 1006 — Throttle triggeroriginal · FC 72 — extra spring needs new trigger AND inner molding
  • 4126 182 1007 — Throttle triggernew · FC 72 — extra spring needs new trigger AND inner molding
  • 4126 182 0805 — Throttle interlockoriginal · FC 72 — extra spring needs new trigger AND inner molding
  • 4126 182 0806 — Throttle interlocknew · FC 72 — extra spring needs new trigger AND inner molding
  • 4126 182 4507 — Additional torsion spring, conditional retrofitnew · FC 72 — extra spring needs new trigger AND inner molding
  • 4133 790 1301 — Complete control handle, unchanged numbersame-number revision · FC 72 — extra spring needs new trigger AND inner molding

Wrong number or missing part for the FC 72? Report a correction →