← Edgers & other equipment · series 4133

Stihl 4133 · Section F · 5 of 16 · 36 parts

Carburetor WT-227F

Fits FS 72, FS 74, FS 76.

Parts diagrams →

Historical fitment & changes (3) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131415161718192202122232424252627282933031323334456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (36)

PosPart numberDescriptionQty
1 4133 121 5400 Valve jet 1
2 4117 122 9402 Plug 1
3 1110 121 5100 Inlet needle 1
4 1120 122 3001 Spring 1
5 1113 121 5000 Inlet control lever 1
6 1113 121 9200 Spindle 1
7 1114 122 7400 Round head screw 1
8 4133 129 0901 Gasket 1
9 1113 121 4705 Metering diaphragm 1
10 4133 120 2200 Flange 1
11 4133 121 5200 Valve 1
12 4133 120 8600 Non-return valve 1
13 4133 121 2700 Cap 1
14 4133 121 0800 End cover 1
15 4133 122 7400 Round head screw 4
16 1114 121 7800 Strainer 1
17 1120 121 4805 Pump diaphragm Fitment / change note → 1
18 1120 129 0905 Gasket 1
19 4117 121 0803 End cover 1
20 1114 122 7100 Screw 1
21 4117 122 3006 Spring 1
22 4117 122 6200 Idle speed adjustment screw 1
23 4133 122 3200 Torsion spring 1
24 1117 122 9000 E-clip 2
25 4211 120 7100 Throttle shaft with lever Fitment / change note → 1
26 4117 121 8900 Pin 1
27 4117 122 3007 Spring 1
28 1120 122 6705 High speed adjustment screw 1
29 4119 122 6801 Low speed adjustment screw 1
30 1115 122 3002 Spring 1
31 4117 121 3300 Throttle shutter 1
32 1110 122 7400 Round head screw 1
33 4130 121 8600 Washer 1
34 4133 120 8701 Control valve 1
Not numbered on the diagram — assemblies, kits and options
— 4133 120 0600 Carburetor WT-227F Fitment / change note → 1
— 4133 007 1060 Set of carburetor parts Fitment / change note → 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · FS 72 / FS 74 / FS 76

FS 72, FS 74, FS 76: WT 227 D becomes WT 227 F without a carburetor number change

Carburetor 4133 120 0600 retains its number; do not extend this note to WT-329.

  • For production reasons the carburetor designation changes from WT 227 D to WT 227 F; the complete carburetor remains 4133 120 0600 and includes the throttle shaft and pump diaphragm (items 1 and2).
  • The parts kit 4133 007 1060 also keeps its number and includes the pump diaphragm item 2. All other parts remain as before. Introduction is in progress; unmodified carburetors and kits are supplied until factory stocks are exhausted.
  • This source names the WT 227 family only. The separate retained WT-329 sheet does not inherit these assertions; no serial threshold or carburetor setting is given.
  • Historical English TI 01/1994, sections 1–4 only. Exact named models and the specified assembly are retained; no unlisted variants or current spare availability are inferred. No physical interchange test was performed.

Source: TI 1/1994, p. 5 · TI 1/1994, p. 6 — FS 72, FS 74, FS 76: WT 227 D becomes WT 227 F without a carburetor number change.

Part numbers (2)
  • 4133 120 0600 — Complete carburetor, WT 227 D → WT 227 F designation onlyunchanged-number · FS 72, FS 74, FS 76: WT 227 D becomes WT 227 F without a carburetor number change
  • 4133 007 1060 — Carburetor overhaul parts kit; includes diaphragm item 2unchanged-number · FS 72, FS 74, FS 76: WT 227 D becomes WT 227 F without a carburetor number change

Service note · FS 72 / FS 74 / FS 76

FS 72, FS 74, FS 76: WT 227 throttle shaft standardized with HS 60/61

4133 120 7100 → 4211 120 7100 for the named FS carburetor.

  • Throttle shaft with lever 4211 120 7100 has been supplied for some time in place of 4133 120 7100, to standardize parts with HS 60 and HS 61. This names the standardization context, not complete carburetor interchange or added HS model bindings.
  • The shaft is item 1 in carburetor 4133 120 0600. Original shaft is no longer available from the factory; summary introduction is in progress. No serial threshold is supplied; do not bind to the separate WT-329 sheet.
  • Historical English TI 01/1994, sections 1–4 only. Exact named models and the specified assembly are retained; no unlisted variants or current spare availability are inferred. No physical interchange test was performed.

Source: TI 1/1994, p. 5 · TI 1/1994, p. 6 — FS 72, FS 74, FS 76: WT 227 throttle shaft standardized with HS 60/61.

Part numbers (2)
  • 4133 120 7100 — Original throttle shaft with leveroriginal · FS 72, FS 74, FS 76: WT 227 throttle shaft standardized with HS 60/61
  • 4211 120 7100 — Replacement throttle shaft with leverreplacement · FS 72, FS 74, FS 76: WT 227 throttle shaft standardized with HS 60/61

Service note · FS 72 / FS 74 / FS 76

FS 72, FS 74, FS 76: WT 227 pump diaphragm replacement also enters overhaul kit

4133 121 4800 → 1120 121 4805; kit 4133 007 1060 keeps its number.

  • To standardize parts, pump diaphragm 1120 121 4805 is supplied as a spare instead of 4133 121 4800. This also applies to general-overhaul carburetor parts kit 4133 007 1060.
  • The diaphragm is item 2, included in complete carburetor 4133 120 0600 and kit 4133 007 1060. The original separate diaphragm is no longer factory-available, while unmodified numbered kits/carburetors are supplied until stocks are exhausted; these are different stock rules.
  • Introduction is in progress, without a serial threshold. No tuning value, other-model carburetor interchange or WT-329 application is inferred.
  • Historical English TI 01/1994, sections 1–4 only. Exact named models and the specified assembly are retained; no unlisted variants or current spare availability are inferred. No physical interchange test was performed.

Source: TI 1/1994, p. 5 · TI 1/1994, p. 6 — FS 72, FS 74, FS 76: WT 227 pump diaphragm replacement also enters overhaul kit.

Part numbers (3)
  • 4133 121 4800 — Original pump diaphragmoriginal · FS 72, FS 74, FS 76: WT 227 pump diaphragm replacement also enters overhaul kit
  • 1120 121 4805 — Replacement pump diaphragmreplacement · FS 72, FS 74, FS 76: WT 227 pump diaphragm replacement also enters overhaul kit
  • 4133 007 1060 — Unchanged-number overhaul kit, includes diaphragmkit · FS 72, FS 74, FS 76: WT 227 pump diaphragm replacement also enters overhaul kit

Wrong number or missing part for the FS 72, FS 74, FS 76? Report a correction →