← Augers/Drills & other equipment · series 4134

Stihl 4134 · Section L · 11 of 12 · 20 parts

Earth auger

Fits BT 120 C.

Parts diagrams →

Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110111213141516171819220333333444444555556789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (20)

PosPart numberDescriptionQty
1 4404 680 2004 NLA Earth auger Ø 40 mm / 1 5/8" Fitment / change note → 1
2 4404 680 3050 NLA Drill head 1
3 4311 682 3500 Retaining pin 1
4 9395 021 2360 NLA Split pin 4.5x40 1
5 9062 319 1260 NLA Countersunk screw M6x12 2
6 4404 680 2006 NLA Earth auger Ø 60 mm / 2 3/8" Fitment / change note → 1
7 4404 680 3051 NLA Drill head 1
8 4404 682 3101 NLA Blade Fitment / change note → 1
9 4404 680 2009 NLA Earth auger Ø 90 mm / 3 1/2" Fitment / change note → 1
10 4404 680 3052 NLA Drill head 1
11 4404 682 3102 NLA Blade Fitment / change note → 1
12 4404 680 2012 Earth auger Ø 120 mm / 4 3/4" Fitment / change note → 1
13 4404 680 3053 Drill head 1
14 4404 682 3103 Blade Fitment / change note → 1
15 4404 680 2015 NLA Earth auger Ø 150 mm / 5 15/16" Fitment / change note → 1
16 4404 680 3054 NLA Drill head 1
17 4404 682 3104 NLA Blade Fitment / change note → 1
18 4404 680 2020 Earth auger Ø 200 mm / 7 13/16" Fitment / change note → 1
19 4404 680 3055 Drill head 1
20 4404 682 3105 Blade Fitment / change note → 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · BT 120 C

BT 120 C: eight historically approved augers

The approval list distinguishes earth augers, planting auger and planting-hole drill.

  • Section3 explicitly says the following augers are approved. Six earth augers share695mm (27.4in) length: Ø40,60,90,120,150,200mm, with the exact part-number mapping below. This is the historical BT120C list, not universal approval for other machines or present availability.
  • Planting auger4311 680 2515 is Ø150mm (6in),525mm (20.6in) long. Planting-hole drill4404 680 1900 is Ø260mm (10.2in); no length is supplied. Do not inherit695mm or525mm for that drill.
  • Historical BT 120 C only. TI37/1998 calls the machine series4313; the catalog groups its exact-model sheets under4134. Those identifiers are retained, not declared equivalent. Later carburetor/control revisions and BT121 are not included. No hardware operation was performed.

Source: TI 37/1998, p. 4 — Complete section3.

Part numbers (8)
  • 4404 680 2004 — Earth auger Ø40mm (1.6in), length695mm (27.4in)Historical specified item · BT 120 C; TI37/1998 configuration only
  • 4404 680 2006 — Earth auger Ø60mm (2.4in), length695mm (27.4in)Historical specified item · BT 120 C; TI37/1998 configuration only
  • 4404 680 2009 — Earth auger Ø90mm (3.5in), length695mm (27.4in)Historical specified item · BT 120 C; TI37/1998 configuration only
  • 4404 680 2012 — Earth auger Ø120mm (4.7in), length695mm (27.4in)Historical specified item · BT 120 C; TI37/1998 configuration only
  • 4404 680 2015 — Earth auger Ø150mm (6in), length695mm (27.4in)Historical specified item · BT 120 C; TI37/1998 configuration only
  • 4404 680 2020 — Earth auger Ø200mm (8in), length695mm (27.4in)Historical specified item · BT 120 C; TI37/1998 configuration only
  • 4311 680 2515 — Planting auger Ø150mm (6in), length525mm (20.6in)Historical specified item · BT 120 C; TI37/1998 configuration only
  • 4404 680 1900 — Planting hole drill Ø260mm (10.2in)Historical specified item · BT 120 C; TI37/1998 configuration only

Service note · BT 120 C

BT 120 C: diameter-specific earth-auger blades

Five replacement blades are specified; no Ø40mm blade is listed.

  • Section4.1 maps4404 682 3101 to Ø60mm (2.4in),3102 to Ø90mm (3.5in),3103 to Ø120mm (4.7in),3104 to Ø150mm (6in), and3105 to Ø200mm (8in) earth augers. These are distinct blade applications, not interchangeable choices.
  • No blade row is provided for the Ø40mm earth auger, planting auger or planting-hole drill. This table omission is not proof no replacement exists; no blade number or negative fitment is fabricated.
  • Historical BT 120 C only. TI37/1998 calls the machine series4313; the catalog groups its exact-model sheets under4134. Those identifiers are retained, not declared equivalent. Later carburetor/control revisions and BT121 are not included. No hardware operation was performed.

Source: TI 37/1998, p. 4 — Complete section4.1.

Part numbers (5)
  • 4404 682 3101 — Blade for Ø60mm earth augerHistorical specified item · BT 120 C; TI37/1998 configuration only
  • 4404 682 3102 — Blade for Ø90mm earth augerHistorical specified item · BT 120 C; TI37/1998 configuration only
  • 4404 682 3103 — Blade for Ø120mm earth augerHistorical specified item · BT 120 C; TI37/1998 configuration only
  • 4404 682 3104 — Blade for Ø150mm earth augerHistorical specified item · BT 120 C; TI37/1998 configuration only
  • 4404 682 3105 — Blade for Ø200mm earth augerHistorical specified item · BT 120 C; TI37/1998 configuration only

Wrong number or missing part for the BT 120 C? Report a correction →