← Augers/Drills & other equipment · series 4134

Stihl 4134 · Section M · 12 of 12 · 12 parts

Augers, Tools, Extras

Fits BT 120 C.

Parts diagrams →

Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110111223333456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (12)

PosPart numberDescriptionQty
1 4311 680 2515 NLA Planting auger Ø 150 mm / 5.9" Fitment / change note → 1
2 9395 021 2360 NLA Split pin 4.5x40 1
3 4311 682 3500 Retaining pin 1
4 4311 680 3305 NLA Pilot bit 1
5 4404 680 1900 Planting hole drill Ø 260 mm / 10.2" Fitment / change note → 1
6 4311 680 2350 NLA Shank extension 450 mm / 18" Fitment / change note → 1
7 4311 680 4010 Chuck Fitment / change note → 1
8 4311 748 2500 Hip pad Fitment / change note → 1
9 4224 890 3400 Combination wrench 1
10 0000 890 2300 NLA Screwdriver 1
11 0000 890 2305 Screwdriver 1
12 0000 891 0801 NLA Tool roll option 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · BT 120 C

BT 120 C: eight historically approved augers

The approval list distinguishes earth augers, planting auger and planting-hole drill.

  • Section3 explicitly says the following augers are approved. Six earth augers share695mm (27.4in) length: Ø40,60,90,120,150,200mm, with the exact part-number mapping below. This is the historical BT120C list, not universal approval for other machines or present availability.
  • Planting auger4311 680 2515 is Ø150mm (6in),525mm (20.6in) long. Planting-hole drill4404 680 1900 is Ø260mm (10.2in); no length is supplied. Do not inherit695mm or525mm for that drill.
  • Historical BT 120 C only. TI37/1998 calls the machine series4313; the catalog groups its exact-model sheets under4134. Those identifiers are retained, not declared equivalent. Later carburetor/control revisions and BT121 are not included. No hardware operation was performed.

Source: TI 37/1998, p. 4 — Complete section3.

Part numbers (8)
  • 4404 680 2004 — Earth auger Ø40mm (1.6in), length695mm (27.4in)Historical specified item · BT 120 C; TI37/1998 configuration only
  • 4404 680 2006 — Earth auger Ø60mm (2.4in), length695mm (27.4in)Historical specified item · BT 120 C; TI37/1998 configuration only
  • 4404 680 2009 — Earth auger Ø90mm (3.5in), length695mm (27.4in)Historical specified item · BT 120 C; TI37/1998 configuration only
  • 4404 680 2012 — Earth auger Ø120mm (4.7in), length695mm (27.4in)Historical specified item · BT 120 C; TI37/1998 configuration only
  • 4404 680 2015 — Earth auger Ø150mm (6in), length695mm (27.4in)Historical specified item · BT 120 C; TI37/1998 configuration only
  • 4404 680 2020 — Earth auger Ø200mm (8in), length695mm (27.4in)Historical specified item · BT 120 C; TI37/1998 configuration only
  • 4311 680 2515 — Planting auger Ø150mm (6in), length525mm (20.6in)Historical specified item · BT 120 C; TI37/1998 configuration only
  • 4404 680 1900 — Planting hole drill Ø260mm (10.2in)Historical specified item · BT 120 C; TI37/1998 configuration only

Service note · BT 120 C

BT 120 C: extension, chuck, padding and starter accessories

Six accessory/lubricant rows retain their separate applications.

  • Section4: shank extension4311 680 2350 extends auger; no extension length stated. Chuck4311 680 4010 is for drills UP TO13mm (0.5in) diameter; padding4311 748 2500 cushions the user’s thigh. No extra cutting capacity or unrestricted extension stacking is implied.
  • ElastoStart0000 190 3400 is the rewind-starter GRIP WITH ROPE;0000 195 8200 is rope alone. STIHL gear lubricant0781 120 1117 is an80g/3oz TUBE for the gearbox; package size is not a gearbox fill quantity or service interval.
  • Historical BT 120 C only. TI37/1998 calls the machine series4313; the catalog groups its exact-model sheets under4134. Those identifiers are retained, not declared equivalent. Later carburetor/control revisions and BT121 are not included. No hardware operation was performed.

Source: TI 37/1998, p. 4 — Complete section4.

Part numbers (6)
  • 4311 680 2350 — Shank extensionHistorical specified item · BT 120 C; TI37/1998 configuration only
  • 4311 680 4010 — Chuck for drills up to13mmHistorical specified item · BT 120 C; TI37/1998 configuration only
  • 4311 748 2500 — Thigh paddingHistorical specified item · BT 120 C; TI37/1998 configuration only
  • 0000 190 3400 — ElastoStart grip with ropeHistorical specified item · BT 120 C; TI37/1998 configuration only
  • 0000 195 8200 — ElastoStart ropeHistorical specified item · BT 120 C; TI37/1998 configuration only
  • 0781 120 1117 — STIHL gear lubricant80g/3oz tubeHistorical specified item · BT 120 C; TI37/1998 configuration only

Wrong number or missing part for the BT 120 C? Report a correction →