← Augers/Drills & other equipment · series 4134

Stihl 4134 · Section C · 3 of 14 · 26 parts

Muffler, Shroud, Fuel tank

Fits FS 300, FS 350.

Parts diagrams →

Historical fitment & changes (5) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
11011121315161718192202122232425345556789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (26)

PosPart numberDescriptionQty
1 4134 140 0602 Muffler 1
2 4134 140 0606 Muffler 1
3 4140 140 6900 Stub with screen → replaced by 4140 140 6903 TI 23/2003 1
4 0783 830 2000 Tube of sealant Dirko HT red option 1
5 9075 478 4159 Pan head self-tapping screw IS-D5x24 3
6 4134 141 9000 Screen 1
7 4134 084 0910 Shroud 1
8 4134 080 1600 NLA Shroud Fitment / change note → 1
9 4134 084 6800 Spacer 1
10 4134 967 1514 NLA Model plate Fitment / change note → 1
11 4134 967 1501 NLA Model plate FS 300 1
12 4134 967 1500 NLA Model plate FS 350 Fitment / change note → 1
13 0000 951 1100 Screw IS-D5x20 2
15 4128 358 0800 Hose 1
16 not sold separately Hose 2.2x5.4x205 mm, R1 not available as a separate item 1
17 0000 989 0516 Grommet 1
18 0000 351 3200 Sleeve 4
19 1125 084 8900 Grommet 4
20 0000 350 3506 Pickup body 1
21 0000 951 1102 Screw IS-D5x26 4
22 4128 350 0505 Filler cap 1
23 0000 350 0900 Rope 1
24 0000 353 0800 Filler cap retainer 1
25 0000 967 3693 Warning pictogram Filler cap 1
Not numbered on the diagram — assemblies, kits and options
— 4134 140 0652 NLA Muffler Fitment / change note → 1
— 0000 930 2802 Hose 2.2x5.4 mm x 1 m, R1 option 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Conditional replacement · FS 120 / FS 200 / FS 350 / BT 120 C

TI22: shrouds, round model plates and replacement labels

The label sheet does not extend machine fitment to every model pictured on it.

  • Round model plates move from shroud to the modified fan housing; company logo moves to the shroud. New shrouds lose the old plate seat and change contour for ignition-lead routing. FS 120/200/350 shroud 4134 084 0902 becomes 4134 080 1600; BT 120 C 4134 084 0907 becomes 4134 080 1601. Previous shrouds are no longer factory supplied.
  • New replacement shrouds include model-label sheet 4134 967 1514. For an old machine, apply its appropriate label to shaded area 2 of illustration 250TI037. Labels pictured for FS 250, FS 300 and FR 350 do not prove all other update parts fit those models. Only the shroud with decompression-valve opening 3 (from FS 350) is supplied as replacement for the stated models; this does not add a decompression valve to a machine.
  • Round plate pairs: FS 120 4134 967 1503 to 4134 967 1511; FS 200 4134 967 1502 to 4134 967 1510; FS 350 4134 967 1500 to 4134 967 1507; BT 120 C 4313 967 1500 to 4313 967 1501. Previous plates are supplied only while stocks last. Introduction follows section5.3 (in progress). Observe section8 muffler sets and sections7/9/10 ignition/cooling dependencies when replacing shrouds; labels alone are not a complete conversion.
  • TI22 describes an interdependent update package. Its introduction says most new parts were fitted to FS 250 from production start, with unspecified exceptions; this is not blanket FS 250 fitment approval. Shared sheets do not extend the named model/configuration scope. Factory availability is historical, not current stock. No physical interchange test was performed.

Source: TI 22/2001, p. 5 · TI 22/2001, p. 7 · TI 22/2001, p. 8 — 6 all illustrations, service/replacement notes and split summary.

Part numbers (13)
  • 4134 084 0902 — Previous shroudNo longer factory supplied · FS 120 / FS 200 / FS 350
  • 4134 084 0907 — Previous shroudNo longer factory supplied · BT 120 C
  • 4134 080 1600 — New shroudIncludes label sheet · FS 120 / FS 200 / FS 350
  • 4134 080 1601 — New shroudIncludes label sheet · BT 120 C
  • 4134 967 1514 — Sheet with adhesive model labelsChoose actual machine label · FS 120, FS 200, FS 350, BT 120 C; stated configuration only
  • 4134 967 1503 — Previous model platePrevious; stocks only · FS 120
  • 4134 967 1511 — Round model plateNew fan-housing plate · FS 120
  • 4134 967 1502 — Previous model platePrevious; stocks only · FS 200
  • 4134 967 1510 — Round model plateNew fan-housing plate · FS 200
  • 4134 967 1500 — Previous model platePrevious; stocks only · FS 350
  • 4134 967 1507 — Round model plateNew fan-housing plate · FS 350
  • 4313 967 1500 — Previous model platePrevious; stocks only · BT 120 C
  • 4313 967 1501 — Round model plateNew fan-housing plate · BT 120 C

Conditional replacement · FS 120 / FS 200 / FS 350

FS 120 / FS 200 / FS 350: updated muffler-with-shroud set

Set includes the revised shroud and model-label sheet; cooling and ignition dependencies still apply.

  • Muffler-with-shroud set 4134 140 0650 becomes 4134 140 0652, including shroud 4134 080 1600 instead of 4134 084 0902. Shroud includes adhesive model-label sheet 4134 967 1514; choose the correct label for an old machine. Shroud revision accompanies changed ignition lead routing and model-plate position.
  • Previous set and shroud are no longer factory supplied. Introduction follows section5.3, in progress for all named models. These are set order numbers, not evidence that every similarly numbered bare muffler is interchangeable.
  • On FS 120/200, a new cylinder shroud on an older machine also requires index-C clutch shroud; on FS 350 the clutch-housing recess must be sealed with cover 4134 161 1200. See companion cooling notes. Do not transfer either FS-only condition to BT 120 C.
  • TI22 describes an interdependent update package. Its introduction says most new parts were fitted to FS 250 from production start, with unspecified exceptions; this is not blanket FS 250 fitment approval. Shared sheets do not extend the named model/configuration scope. Factory availability is historical, not current stock. No physical interchange test was performed.

Source: TI 22/2001, p. 7 · TI 22/2001, p. 9 · TI 22/2001, p. 10 — 6 shroud context;8 complete split summary and remarks.

Part numbers (5)
  • 4134 140 0650 — Previous muffler-with-shroud setNo longer factory supplied · FS 120, FS 200, FS 350; stated configuration only
  • 4134 140 0652 — New muffler-with-shroud setIncludes new shroud · FS 120, FS 200, FS 350; stated configuration only
  • 4134 084 0902 — Previous shroudNo longer factory supplied · FS 120, FS 200, FS 350; stated configuration only
  • 4134 080 1600 — New shroudIncludes label sheet · FS 120, FS 200, FS 350; stated configuration only
  • 4134 967 1514 — Model-label sheetIncluded with shroud · FS 120, FS 200, FS 350; stated configuration only

Service note · FS 120 / FS 200 / FS 350

FS120/200/350: spark-arresting screen maintained without tools

The tool-free claim does not cover FS400/450.

  • Section1 explicitly limits TOOL-FREE spark-arresting-screen maintenance to FS120, FS200 and FS350. The common cover includes FS400/450 but this particular claim does not.
  • No screen order number, removal sequence or permission to omit the screen is supplied. It is a maintenance-access feature, not a cleaning or emissions test.
  • Historical TI42/1997 configurations only, not all later versions sharing a model name. No hardware operation was performed. No part interchange or numeric serial cutoff is established.

Source: TI 42/1997, p. 2 — Section1 exhaust muffler.

No additional parts-table entry added.

Service note · FS 120 / FS 200 / FS 350 / FS 400 / FS 450

FS120/200/350/400/450: ignition, plugs and fuel capacities

305 mm ignition lead applies only to FS400/450.

  • Ignition module has INTEGRAL ELECTRONIC SPEED LIMITER. Suppressed spark plugs listed are Bosch WSR6F, NGK BPMR7A OR Champion RCJ6Y; these are alternatives, not a requirement to combine them. No plug gap, torque or ignition timing is specified here.
  • Ignition lead length305 mm (12 in) is explicitly FS400/450 ONLY. It is not an ignition-module part number or a length requirement for FS120/200/350.
  • Transparent tank enables fuel-level identification. Capacity FS120/200/350 =0.64 l (1.35 US pt); FS400/450 =0.68 l (1.43 US pt). No fuel mixture specification or tank interchange is established on these pages.
  • Historical TI42/1997 configurations only, not all later versions sharing a model name. No hardware operation was performed. No part interchange or numeric serial cutoff is established.

Source: TI 42/1997, p. 3 · TI 42/1997, p. 4 — Section1 fuel-system description; sections2.1.2 tank capacity and2.1.3 ignition.

No additional parts-table entry added.

Conditional replacement · FS 120 / FS 200 / FS 300 / FS 350

FS 120 / 200 / 300 / 350: screenless muffler replacement is market-restricted

Muffler 4134 140 0601 is only a general replacement where licensing rules do not require a spark-arresting screen.

  • Section 4 announces that SOME VERSIONS of FS 300 and FS 350 for CERTAIN MARKETS will come standard with modified muffler 4134 140 0601 WITHOUT A SPARK ARRESTING SCREEN. No market list, production date or serial boundary is supplied; the gearhead cutoff does not date this change.
  • The new version should be used as a GENERAL REPLACEMENT only in countries whose LICENSING REGULATIONS DO NOT SPECIFY A SPARK ARRESTING SCREEN. The explicit note extends this conditional replacement to FS 120 and FS 200. It does not extend to FS 400/450 from the bulletin heading, or FS 250/R variants from shared catalog sheets.
  • This historical country-dependent condition is not a present-day determination that a screen is optional in any particular place and is not an instruction to remove a screen from an existing muffler.
  • Later SCS 01-2012 USA sheets list other muffler versions and a screen/stub arrangement, but do not list this 4134 140 0601 number. Retain the historical number and restriction without inventing a drawing position or substituting later muffler numbers. Absence in the later USA catalog does not disprove the 1998 market-specific version.
  • The footer’s last-TI 42.97, copyright 1998 and documentation 6293 are bibliography, not production cutoffs, part numbers or a dependency needed to interpret this self-contained change. Prior conflicts and the existing TI27 source gap remain unchanged.
  • Historical source guidance; no present-day stock guarantee or verified physical interchange. No hardware operation was performed.

Source: TI 20/1998, p. 4 — Page 4 complete section 4, parts availability, FS120/200 note and footer.

Part numbers (1)
  • 4134 140 0601 — Muffler without spark arresting screenMarket-restricted general replacement · FS 300 / FS 350; also FS 120 / FS 200 only under the printed licensing restriction

Wrong number or missing part for the FS 300, FS 350? Report a correction →