Stihl 4135 · Section F · 6 of 15 · 35 parts
Carburetor SK5, C1Q-SK5
Fits FR 108.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (35)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4116 121 5100 | Inlet needle | 1 |
| 2 | 1120 122 3004 | Spring | 1 |
| 3 | 1120 121 9200 | Spindle | 1 |
| 4 | 1125 121 5000 | Inlet control lever | 1 |
| 5 | 1120 122 6600 | Collar screw | 1 |
| 6 | 4135 121 5400 | Valve jet | 1 |
| 7 | 4129 121 0700 | Cup plug | 1 |
| 8 | 4129 129 0902 | Gasket | 1 |
| 9 | 4129 121 4700 | Metering diaphragm | 1 |
| 10 | 1129 121 0800 | End cover | 1 |
| 11 | 4132 122 6600 | Collar screw | 2 |
| 12 | 1120 122 3005 | Spring | 3 |
| 13 | 4129 122 6700 | High speed adjustment screw | 1 |
| 14 | 4129 122 6800 | Low speed adjustment screw | 1 |
| 15 | 4129 122 6300 | Idle speed adjustment screw | 1 |
| 16 | 1123 122 3000 | Spring | 1 |
| 17 | 4132 120 7101 | Throttle shaft with lever | 1 |
| 18 | 4119 121 8900 | Pin | 1 |
| 19 | 1120 122 9000 | E-clip | 1 |
| 20 | 1125 122 9001 | E-clip | 1 |
| 21 | 4129 121 3300 | Throttle shutter | 1 |
| 22 | 1125 122 7403 | Round head screw | 2 |
| 23 | 1123 121 7800 | Strainer | 1 |
| 24 | 1129 121 4800 | Pump diaphragm | 1 |
| 25 | 1123 129 0905 | Gasket | 1 |
| 26 | 4129 121 0800 | End cover | 1 |
| 27 | 1120 122 7800 | Oval head screw | 1 |
| 28 | 4119 122 3002 | Spring | 1 |
| 29 | 4119 122 4200 | Ball | 1 |
| 30 | 4132 121 3000 | Choke shaft | 1 |
| 31 | 4119 121 2901 | Choke shutter | 1 |
| 32 | 1125 121 0700 | Cup plug | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 4135 120 0602 | Carburetor SK5 | 1 |
| — | 4135 120 0600 | Carburetor C1Q-SK5 no longer available from factory | 1 |
| — | 4134 007 1060 | Set of carburetor parts | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · FR 108
FR 108: carburetor kit and crankcase sealant differences
TI 4132 007 1061 and Dirko 0783 830 2120 differ from later FR 108 IPL material numbers.
- Section 4.5.2 lists carburetor parts kit 4132 007 1061 without an individual carburetor model or kit-content breakdown. Retained FR 108 carburetor sheets F(SK 5/C 1 Q-SK 5) and G(C 1 Q-SK 7 USA) instead list set 4134 007 1060. Keep the conflict visible; do not claim the 1995 kit fits every later carburetor or infer a supersession.
- Dirko sealant 0783 830 2120 is specified for sealing the crankcase. Later FR 108 sheets A/P list Dirko HT red 0783 830 2000. No replacement relationship or chemical equivalence is established by this TI. No tube size, curing time or sealant application procedure is supplied here.
- Historical TI 04/1995 guidance for the FR 108, series 4135; no serial cutoff is printed. Historical approvals and specifications are not a current compatibility approval or independently measured performance. Exact-model IPL links are navigation, not permission to apply these values to an unidentified later configuration. No hardware operation was performed.
Source: TI 4/1995, p. 7 — carburetor kit and crankcase sealant differences.
Part numbers (2)
- 4132 007 1061 — Carburetor parts kitprinted 1995 kit; model contents unspecified · FR 108; TI 04/1995 conditions
- 0783 830 2120 — Dirko sealantcrankcase sealing · FR 108; TI 04/1995 conditions
Wrong number or missing part for the FR 108? Report a correction →