Stihl 4135 · Section A · 1 of 20 · 21 parts
FR 125: Crankcase, Cylinder
Fits FR 125.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (21)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4126 020 2670 | Crankcase, fan side | 1 |
| 2 | 9380 620 2570 | Roll pin 5x12 | 2 |
| 3 | 9503 003 0342 | Grooved ball bearing 6202 | 2 |
| 4 | 9640 003 2794 | Oil seal 25x15x7 | 2 |
| 5 | 4126 020 2870 | Crankcase, starter side | 1 |
| 6 | 4126 030 0470 | Crankshaft | 1 |
| 7 | 9022 341 1050 | Spline screw IS-M5x25 | 3 |
| 8 | 4126 022 0570 | Cylinder | 1 |
| 9 | 4126 030 2072 | Piston | 1 |
| 10 | 4133 034 3000 | Piston ring Ø 33x1.5 mm | 2 |
| 11 | 4112 034 1500 | Piston pin | 1 |
| 12 | 9463 650 0800 | Snap ring 8x0.7 | 2 |
| 13 | 9512 004 1820 | Needle cage 8x11x10 | 1 |
| 14 | 4126 029 2370 | Cylinder gasket | 1 |
| 15 | 9022 341 0980 | Spline screw IS-M5x16 | 2 |
| 16 | 0000 400 7000 | Spark plug NGK BPMR7A | 1 |
| 16 | 1110 400 7005 | Spark plug Bosch WSR 6 F | 1 |
| 17 | 0000 998 0606 | Torsion spring | 1 |
| 18 | 1106 405 1000 | Spark plug boot → replaced by 1128 405 1000, 1128 405 1000 TI 30/1995 | 1 |
| 19 | 4126 149 0670 | Muffler gasket | 1 |
| 20 | 0783 830 2000 | Tube of sealant Dirko HT red option | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · FR 125 / FR 135 / FR 145
FR 125 / FR 135 / FR 145: three distinct engine specifications
Displacement, bore, stroke, rated output, tank capacity and weight remain model-specific.
- FR 125: displacement 25.6 cm³ (1.56 cu.in); bore 33 mm (1.30 in); stroke 30 mm (1.18 in); ISO 8893 engine power 0.9 kW (1.2 bhp) at 7,500 rpm. Fuel tank 0.55 l (1.16 US pt); weight 8.1 kg (17.8 lb).
- FR 135: displacement 34.4 cm³ (2.10 cu.in); bore 37 mm (1.46 in); stroke 32 mm (1.26 in); ISO 8893 engine power 1.2 kW (1.6 bhp) at 7,500 rpm. Fuel tank 0.65 l (1.37 US pt); weight 9.0 kg (19.8 lb).
- FR 145: displacement 44.8 cm³ (2.73 cu.in); bore 41 mm (1.61 in); stroke 34 mm (1.34 in); ISO 8893 engine power 1.5 kW (2.0 bhp) at 7,500 rpm. Fuel tank 0.80 l (1.7 US pt); weight 9.6 kg (21.1 lb).
- All three weights explicitly exclude cutting tool and deflector; fuel loading is not specified here. Rated power at 7,500 rpm is not a maximum permissible speed. Dimensions do not establish cylinder/piston interchange or repair tolerances.
- Historical TI15/1999 names FR 125, FR 135 and FR 145 and series 4126, 4135, 4113. The retained exact-model IPL groups these machines under 4135; that navigation grouping is not a series-equivalence or parts-interchange claim. No serial cutoff or later-model applicability is supplied.
Source: TI 15/1999, p. 1 · TI 15/1999, p. 2 · TI 15/1999, p. 3 · TI 15/1999, p. 4 — All four original pages; contents and figures, sections 1–6, complete specification and accessory tables, repair dependencies and colophons.
No additional parts-table entry added.
Wrong number or missing part for the FR 125? Report a correction →