← FR 125, FR 135, FR 145 · FS 108 · FR 108

Stihl 4135 · Section D · 4 of 20 · 18 parts

FR 125: Rewind starter, Muffler

Fits FR 125.

Parts diagrams →

Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131415161723456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (18)

PosPart numberDescriptionQty
1 4133 190 4001 Rewind starter 1
2 not sold separately Hollow rivet 6.5x0.5x5.8 not available as a separate item 2
3 4137 190 1100 Rope rotor with rewind spring 1
4 4137 195 8200 Starter rope Ø 2.7x910 mm 1
5 4123 195 8200 Starter rope Ø 2.7x800 mm 1
6 4123 195 3400 Starter grip 1
7 9104 003 0960 Self-tapping screw P5.5x12 1
8 4126 967 1570 Model plate FR 125 1
9 9022 371 1020 Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 4
10 4133 190 2002 Carrier 1
11 4133 195 7201 Pawl 1
12 0000 998 0612 Torsion spring 1
13 9210 260 1100 Hexagon nut M8 1
14 4126 149 0670 Muffler gasket 1
15 4126 140 0670 Muffler 1
16 9022 346 1220 Spline screw IS-M5x48 2
17 4126 084 1470 Air guide plate 1
Not numbered on the diagram — assemblies, kits and options
— 0000 930 2281 Starter rope Ø 2.7 mm x 30.8 m not illustratedoption 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · FR 125 / FR 135 / FR 145

FR 125 / FR 135 / FR 145: starter ropes, optional ElastoStart and catalog conflicts

Three single-pawl starters have different rope dimensions; the general accessory list does not resolve later catalog disagreements.

  • Section 2.1.1 specifies a single-pawl rewind starter for each model. FR 125 rope: diameter 3.0 mm (0.12 in), length 890 mm (35 in). FR 135: diameter 3.0 mm (0.12 in), length 850 mm (33.5 in). FR 145: diameter 3.8 mm (0.15 in), length 1150 mm (45.3 in). These dimensions must not be collapsed into one rope size.
  • Section 4.1 lists starter rope 0000 195 8200 for the rewind starter, also for ElastoStart, and ElastoStart 0000 190 3400 as a grip with rope. Section 1 calls ElastoStart a special option. The general table supplies no model-by-model accessory diameter, cut length or conversion procedure; it does not override the three model-specific rope dimensions.
  • The retained 01-2012 catalog disagrees in places: FR 125 sheet D lists 4137 195 8200 as 2.7×910 mm and 4123 195 8200 as 2.7×800 mm; FR 135 sheet E lists 4117 195 8200 as 3.5×800 mm. Those are not silently rewritten to the TI dimensions or declared supersessions. FR 145 sheet F lists 4113 195 8270 as 3.8×1150 mm, matching the TI dimension but not establishing identity with the general accessory number.
  • Bulk-rope entries are separate catalog supply descriptions, not a reason to change the finished rope specifications. Exact starter configuration and applicable service instructions are needed to resolve the FR 125/135 discrepancies; no serial boundary or preferred replacement is established here.
  • Historical TI15/1999 names FR 125, FR 135 and FR 145 and series 4126, 4135, 4113. The retained exact-model IPL groups these machines under 4135; that navigation grouping is not a series-equivalence or parts-interchange claim. No serial cutoff or later-model applicability is supplied.

Source: TI 15/1999, p. 1 · TI 15/1999, p. 2 · TI 15/1999, p. 3 · TI 15/1999, p. 4 — All four original pages; contents and figures, sections 1–6, complete specification and accessory tables, repair dependencies and colophons.

Part numbers (2)
  • 0000 195 8200 — Starter ropeGeneral accessory; also for ElastoStart; model-specific dimensions unresolved · FR 125 / FR 135 / FR 145; TI15/1999 accessory listing
  • 0000 190 3400 — ElastoStart grip with ropeSpecial option; no blanket rope-dimension substitution · FR 125 / FR 135 / FR 145; TI15/1999 accessory listing

Service note · FR 125 / FR 135 / FR 145

FR 125 / FR 135 / FR 145: shaft, gearhead and starter lubricants

The table assigns different lubricants to the drive shaft, gearhead and starter.

  • STIHL gear lubricant for hedge trimmers: 0781 120 1109, 80 g / 3 oz tube, or 0781 120 1110, 225 g / 8 oz tube. The printed application is drive shaft in tube; do not broaden it to every liner or bearing merely because the machines also have a flexible shaft.
  • STIHL gear lubricant for brushcutters: 0781 120 1117, 80 g / 3 oz tube, or 0781 120 1118, 225 g / 8 oz tube, for the gearhead. Different product families/applications remain distinct; no mutual lubricant substitution, fill quantity or interval is supplied.
  • STIHL special oil 0781 417 1315, 100 ml / 3.5 fl.oz bottle, is for the rewind spring in the starter and the bearing bore in the rope rotor. Container sizes are not application doses.
  • The shared shaft sheet Q lists 225 g lubricant 1110; the FR 125/135 gearhead sheet S and FR 145 sheet T list 225 g lubricant 1118. These exact catalog links support navigation, not new applications.
  • Historical TI15/1999 names FR 125, FR 135 and FR 145 and series 4126, 4135, 4113. The retained exact-model IPL groups these machines under 4135; that navigation grouping is not a series-equivalence or parts-interchange claim. No serial cutoff or later-model applicability is supplied.

Source: TI 15/1999, p. 1 · TI 15/1999, p. 2 · TI 15/1999, p. 3 · TI 15/1999, p. 4 — All four original pages; contents and figures, sections 1–6, complete specification and accessory tables, repair dependencies and colophons.

Part numbers (5)
  • 0781 120 1109 — Hedge-trimmer gear lubricant, 80 g / 3 ozDrive shaft in tube · FR 125 / FR 135 / FR 145; TI15/1999 accessory listing
  • 0781 120 1110 — Hedge-trimmer gear lubricant, 225 g / 8 ozDrive shaft in tube · FR 125 / FR 135 / FR 145; TI15/1999 accessory listing
  • 0781 120 1117 — Brushcutter gear lubricant, 80 g / 3 ozGearhead · FR 125 / FR 135 / FR 145; TI15/1999 accessory listing
  • 0781 120 1118 — Brushcutter gear lubricant, 225 g / 8 ozGearhead · FR 125 / FR 135 / FR 145; TI15/1999 accessory listing
  • 0781 417 1315 — Special oil, 100 ml / 3.5 fl.ozRewind spring and rope-rotor bearing bore · FR 125 / FR 135 / FR 145; TI15/1999 accessory listing

Wrong number or missing part for the FR 125? Report a correction →