← FR 125, FR 135, FR 145 · FS 108 · FR 108

Stihl 4135 · Section G · 7 of 20 · 15 parts

FR 125: Ignition system, Clutch

Fits FR 125.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
11011121323456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (15)

PosPart numberDescriptionQty
1 4126 400 1270 Flywheel 1
2 9206 160 1100 Hexagon nut M8 1
3 4126 400 1370 Ignition module 1
4 0000 989 1010 Grommet 1
5 not sold separately Ignition lead 220 mm not available as a separate item 1
6 9022 371 0710 Spline screw IS-M4x20 2
7 4126 160 2062 Clutch 1
8 4126 997 1262 Tension spring 1
9 4126 162 8962 Washer 2
10 4112 162 8902 Washer 2
11 4126 162 4200 Collar screw 2
12 4126 084 1070 Fan housing 1
13 9022 341 0980 Spline screw IS-M5x16 3
Not numbered on the diagram — assemblies, kits and options
— 0000 405 0600 NLA Ignition lead 1 m not illustratedoption 1
— 0000 930 2251 Ignition lead 10 m not illustratedoption 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · FR 125 / FR 135 / FR 145

FR 125 / FR 135 / FR 145: carburetor settings, clutch speeds and plugs

Common idle and clutch ranges do not make the FR125-only cut-off rating universal.

  • Section 2.1.2 specifies an all-position diaphragm carburetor with integral fuel pump. For FR 125 and the FR 135/145 column, both L and H standard settings are open 1 full turn; idle is 2,700–3,000 rpm. These are historical standard settings, not a complete adjustment or loaded-running procedure.
  • Only FR 125 has a rated control-valve cut-off of 10,000 rpm without cutting tool. The FR 135/145 entry is a dash: no cut-off speed is supplied for them. Do not read the dash as zero, no speed limit, or permission to use the FR 125 value.
  • All three clutches engage at 3,300–3,700 rpm. This engagement range is distinct from idle, power rating and cut-off. The TI gives no test setup or repair tolerances.
  • Section 2.1.3 lists suppressed spark plugs NGK BPMR 7 A, Bosch WSR 6F or Champion RCJ 6Y. No electrode gap, tightening torque or STIHL order number is printed. Exact-model ignition/clutch sheets are linked without turning catalog part numbers into TI specifications.
  • Historical TI15/1999 names FR 125, FR 135 and FR 145 and series 4126, 4135, 4113. The retained exact-model IPL groups these machines under 4135; that navigation grouping is not a series-equivalence or parts-interchange claim. No serial cutoff or later-model applicability is supplied.

Source: TI 15/1999, p. 1 · TI 15/1999, p. 2 · TI 15/1999, p. 3 · TI 15/1999, p. 4 — All four original pages; contents and figures, sections 1–6, complete specification and accessory tables, repair dependencies and colophons.

No additional parts-table entry added.

Wrong number or missing part for the FR 125? Report a correction →