Stihl 4135 · Section H · 8 of 20 · 29 parts
FR 135, 145: Ignition system, Clutch
Fits FR 135.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (29)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4129 400 1200 | Flywheel | 1 |
| 2 | 9206 160 1100 | Hexagon nut M8 | 1 |
| 3 | 4135 400 1300 | Ignition module | 1 |
| 4 | 0000 989 1010 | Grommet | 1 |
| 5 | not sold separately | Ignition lead 220 mm not available as a separate item | 1 |
| 6 | 9022 371 1020 | Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 | 2 |
| 7 | 4135 160 2001 | Clutch | 1 |
| 8 | 4117 162 8900 | Washer | 2 |
| 9 | 4129 162 8900 | Washer | 2 |
| 10 | 4135 162 4200 | Collar screw | 2 |
| 11 | 0000 997 6100 | Tension spring | 1 |
| 12 | 4129 997 1200 | Tension spring | 1 |
| 13 | 4117 162 8900 | Washer | 4 |
| 14 | 0000 961 0803 | Ring | 2 |
| 15 | 9008 319 1860 | Hexagon head screw M8x30 | 2 |
| 16 | 4135 162 9170 | Sleeve | 2 |
| 17 | 4135 084 1070 | Fan housing | 1 |
| 18 | 9022 341 0980 | Spline screw IS-M5x16 | 4 |
| 19 | 4113 400 1270 | Flywheel | 1 |
| 20 | 4135 791 8370 | Hexagon nut M10 | 1 |
| 21 | 4113 400 1370 | Ignition module | 1 |
| 22 | 4133 405 8001 | Insulator | 1 |
| 23 | 9022 371 0710 | Spline screw IS-M4x20 | 2 |
| 24 | 4113 160 2000 | Clutch | 1 |
| 25 | 4117 162 8900 | Washer | 2 |
| 26 | 4129 162 8900 | Washer | 2 |
| 27 | 4129 162 4200 | Collar screw | 2 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 0000 405 0600 NLA | Ignition lead 1 m not illustratedoption | 1 |
| — | 0000 930 2251 | Ignition lead 10 m not illustratedoption | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · FR 125 / FR 135 / FR 145
FR 125 / FR 135 / FR 145: carburetor settings, clutch speeds and plugs
Common idle and clutch ranges do not make the FR125-only cut-off rating universal.
- Section 2.1.2 specifies an all-position diaphragm carburetor with integral fuel pump. For FR 125 and the FR 135/145 column, both L and H standard settings are open 1 full turn; idle is 2,700–3,000 rpm. These are historical standard settings, not a complete adjustment or loaded-running procedure.
- Only FR 125 has a rated control-valve cut-off of 10,000 rpm without cutting tool. The FR 135/145 entry is a dash: no cut-off speed is supplied for them. Do not read the dash as zero, no speed limit, or permission to use the FR 125 value.
- All three clutches engage at 3,300–3,700 rpm. This engagement range is distinct from idle, power rating and cut-off. The TI gives no test setup or repair tolerances.
- Section 2.1.3 lists suppressed spark plugs NGK BPMR 7 A, Bosch WSR 6F or Champion RCJ 6Y. No electrode gap, tightening torque or STIHL order number is printed. Exact-model ignition/clutch sheets are linked without turning catalog part numbers into TI specifications.
- Historical TI15/1999 names FR 125, FR 135 and FR 145 and series 4126, 4135, 4113. The retained exact-model IPL groups these machines under 4135; that navigation grouping is not a series-equivalence or parts-interchange claim. No serial cutoff or later-model applicability is supplied.
Source: TI 15/1999, p. 1 · TI 15/1999, p. 2 · TI 15/1999, p. 3 · TI 15/1999, p. 4 — All four original pages; contents and figures, sections 1–6, complete specification and accessory tables, repair dependencies and colophons.
No additional parts-table entry added.
Wrong number or missing part for the FR 135? Report a correction →