Stihl 4135 · Section R · 17 of 20 · 44 parts
Handle
Fits FR 125, FR 135, FR 145.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (44)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | not sold separately | Cover not available as a separate item | 1 |
| 2 | not sold separately | Washer not available as a separate item | 1 |
| 3 | not sold separately | Spring washer not available as a separate item | 1 |
| 4 | not sold separately | Lever not available as a separate item | 1 |
| 5 | not sold separately | Insert not available as a separate item | 1 |
| 6 | not sold separately | Washer not available as a separate item | 1 |
| 7 | not sold separately | Base not available as a separate item | 1 |
| 8 | 9210 260 0700 | Hexagon nut M5 | 1 |
| 9 | 9041 116 1020 | Pan head screw M5x20 | 1 |
| 10 | 9294 021 0140 | Washer 6.4 | 1 |
| 11 | 9222 068 0700 | Square nut M5 | 1 |
| 12 | 9041 116 1070 | Pan head screw M5x30 | 1 |
| 13 | 4131 182 8100 | Strap | 1 |
| 14 | not sold separately | Strap not available as a separate item | 1 |
| 15 | 4131 432 9210 | Support | 1 |
| 16 | 4131 430 0210 | Stop switch | 1 |
| 17 | 9321 630 0180 | Spring washer 8 | 1 |
| 18 | 9210 261 1140 | Hexagon nut M8x1 | 1 |
| 19 | not sold separately | Lead 280 mm / 11'' | 1 |
| 20 | 0751 030 8491 | Terminal socket no longer available from factory | 1 |
| 21 | 0751 030 8962 | Terminal socket A 8-1 no longer available from factory | 1 |
| 22 | not sold separately | Lead 220 mm / 8.7'' not available as a separate item | 1 |
| 23 | not sold separately | Lead 1150 mm / 45.3'' not available as a separate item | 1 |
| 24 | not sold separately | Lead 1120 mm / 44.1'' not available as a separate item | 1 |
| 25 | 0751 030 8487 | Round plug no longer available from factory | 2 |
| 26 | 0751 030 8491 | Terminal socket no longer available from factory | 1 |
| 27 | 0751 030 8013 | Terminal socket no longer available from factory | 2 |
| 28 | 0751 030 8470 | Grommet no longer available from factory | 2 |
| 29 | 4126 180 1170 | Throttle cable | 1 |
| 30 | 4135 180 1172 | Throttle cable | 1 |
| 31 | 4113 180 1170 | Throttle cable | 1 |
| 32 | 4114 791 2002 | Handle hose | 1 |
| 33 | not sold separately | Hose 850 mm / 33 1/2'' not available as a separate item | 1 |
| 34 | 4130 790 1315 | Loop handle | 1 |
| 35 | 4123 791 7400 | Clamp | 2 |
| 36 | 9022 341 1370 | Spline screw IS-M6x30 | 2 |
| 37 | 9291 021 0140 | Washer 6.4 | 2 |
| 38 | 9222 068 0900 | Square nut M6 | 2 |
| 39 | 4121 791 7200 | Sleeve | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 4131 180 0710 | Control lever | 1 |
| — | 4113 180 0770 | Control lever | 1 |
| — | 4131 440 2210 | Ground wire | 1 |
| — | 0751 010 1110 | Lead 10 m / 33' not illustratedoption | 1 |
| — | 4203 711 7201 | Hose 960 mm / 37 13/16'' option | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · FR 125 / FR 135 / FR 145
FR 125 / FR 135 / FR 145: backpack construction and drive layout
A flexible shaft connects the backpack powerhead to a straight tube containing a rigid shaft.
- The cover identifies all three backpack brushcutters and illustrates each separately. Intended primary uses are weeds, grass, scrub and shrubs. Favorable power-to-weight ratio, ergonomic controls and comfort are source descriptions, not measured project results.
- Section 1 describes a torsionally rigid three-part pressed crankshaft supported in bearings at both ends; a large cylinder cooling area; an air filter with improved material, longer life and a large effective surface; and a dual-chamber muffler. No component dimensions, replacement numbers or interchange are established by those descriptions.
- The carburetor has H, L and LA adjusting screws. A manual fuel pump assists starting; ElastoStart is a special option, not standard equipment. Controls are a throttle/speed-setting lever and stop button. Clutch shoes are lined.
- The flexible shaft is supported in a protective liner. The rigid shaft in the straight drive tube is supported in ball bearings. The AV system uses three spring-supported points; this is not a rigid/flexible-shaft substitution or spring specification.
- Historical TI15/1999 names FR 125, FR 135 and FR 145 and series 4126, 4135, 4113. The retained exact-model IPL groups these machines under 4135; that navigation grouping is not a series-equivalence or parts-interchange claim. No serial cutoff or later-model applicability is supplied.
Source: TI 15/1999, p. 1 · TI 15/1999, p. 2 · TI 15/1999, p. 3 · TI 15/1999, p. 4 — All four original pages; contents and figures, sections 1–6, complete specification and accessory tables, repair dependencies and colophons.
No additional parts-table entry added.
Wrong number or missing part for the FR 125, FR 135, FR 145? Report a correction →