Stihl 4135 · Section Q · 16 of 20 · 37 parts
Clutch housing, Flexible shaft
Fits FR 125, FR 135, FR 145.
Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.
Parts (37)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4126 161 0570 | Clutch housing | 1 |
| 2 | 4135 161 0570 | Clutch housing | 1 |
| 3 | 9503 003 6461 | Grooved ball bearing 6201-2Z | 1 |
| 4 | 9503 003 6560 | Grooved ball bearing 6202-2Z | 1 |
| 5 | 9456 621 3600 | Circlip 32x1.2 | 1 |
| 6 | 9456 621 3860 | Circlip 35x1.5 | 1 |
| 7 | 4126 160 2970 | Clutch drum | 1 |
| 8 | 4135 160 2971 | Clutch drum | 1 |
| 9 | 9455 621 1130 | Circlip 12x1 | 1 |
| 10 | 9455 621 1520 | Circlip 15x1 | 1 |
| 11 | 4135 162 8370 | Pin | 1 |
| 12 | 0000 997 0604 | Spring | 1 |
| 13 | 9460 624 0500 | E-clip 5 | 1 |
| 14 | 9022 341 1350 | Spline screw IS-M6x25 | 4 |
| 15 | 9022 341 1370 | Spline screw IS-M6x30 | 4 |
| 16 | 4135 711 3271 | Flexible shaft | 1 |
| 17 | 9645 945 7603 | O-ring 18x2.5 | 1 |
| 18 | 4126 710 7270 | Flexible liner | 1 |
| 19 | 4135 710 7271 | Flexible liner | 1 |
| 20 | 4125 717 2000 | Cap | 2 |
| 21 | 4135 740 3070 | Housing | 1 |
| 22 | 4113 740 3070 | Housing | 1 |
| 23 | 9022 341 1050 | Spline screw IS-M5x25 | 1 |
| 24 | 9022 371 1020 | Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 | 1 |
| 25 | 9022 341 0950 | Spline screw IS-M5x10 | 1 |
| 26 | 9503 003 9450 | Grooved ball bearing 627-2Z | 1 |
| 27 | 4135 711 8270 | Rubber bushing | 1 |
| 28 | 4113 711 8270 | Rubber bushing | 1 |
| 29 | 4135 710 3270 | Drive shaft | 1 |
| 30 | 4135 710 7171 | Drive tube assembly Ø 24 mm / 15/16'' | 1 |
| 31 | 4135 711 9470 | Bearing bushing | 4 |
| 32 | 4113 710 7170 | Drive tube assembly Ø 26 mm / 1 1/16'' | 1 |
| 33 | 4113 711 9470 | Bearing bushing | 4 |
| 34 | 0751 010 7056 | Cable tie | 2 |
| 35 | 0781 120 1110 | Gear lubricant 225 g Fitment / change note → option | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 4126 710 3070 | Flexible shaft | 1 |
| — | 4135 710 3071 | Flexible shaft | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · FR 125 / FR 135 / FR 145
FR 125 / FR 135 / FR 145: backpack construction and drive layout
A flexible shaft connects the backpack powerhead to a straight tube containing a rigid shaft.
- The cover identifies all three backpack brushcutters and illustrates each separately. Intended primary uses are weeds, grass, scrub and shrubs. Favorable power-to-weight ratio, ergonomic controls and comfort are source descriptions, not measured project results.
- Section 1 describes a torsionally rigid three-part pressed crankshaft supported in bearings at both ends; a large cylinder cooling area; an air filter with improved material, longer life and a large effective surface; and a dual-chamber muffler. No component dimensions, replacement numbers or interchange are established by those descriptions.
- The carburetor has H, L and LA adjusting screws. A manual fuel pump assists starting; ElastoStart is a special option, not standard equipment. Controls are a throttle/speed-setting lever and stop button. Clutch shoes are lined.
- The flexible shaft is supported in a protective liner. The rigid shaft in the straight drive tube is supported in ball bearings. The AV system uses three spring-supported points; this is not a rigid/flexible-shaft substitution or spring specification.
- Historical TI15/1999 names FR 125, FR 135 and FR 145 and series 4126, 4135, 4113. The retained exact-model IPL groups these machines under 4135; that navigation grouping is not a series-equivalence or parts-interchange claim. No serial cutoff or later-model applicability is supplied.
Source: TI 15/1999, p. 1 · TI 15/1999, p. 2 · TI 15/1999, p. 3 · TI 15/1999, p. 4 — All four original pages; contents and figures, sections 1–6, complete specification and accessory tables, repair dependencies and colophons.
No additional parts-table entry added.
Service note · FR 125 / FR 135 / FR 145
FR 125 / FR 135 / FR 145: shaft, gearhead and starter lubricants
The table assigns different lubricants to the drive shaft, gearhead and starter.
- STIHL gear lubricant for hedge trimmers: 0781 120 1109, 80 g / 3 oz tube, or 0781 120 1110, 225 g / 8 oz tube. The printed application is drive shaft in tube; do not broaden it to every liner or bearing merely because the machines also have a flexible shaft.
- STIHL gear lubricant for brushcutters: 0781 120 1117, 80 g / 3 oz tube, or 0781 120 1118, 225 g / 8 oz tube, for the gearhead. Different product families/applications remain distinct; no mutual lubricant substitution, fill quantity or interval is supplied.
- STIHL special oil 0781 417 1315, 100 ml / 3.5 fl.oz bottle, is for the rewind spring in the starter and the bearing bore in the rope rotor. Container sizes are not application doses.
- The shared shaft sheet Q lists 225 g lubricant 1110; the FR 125/135 gearhead sheet S and FR 145 sheet T list 225 g lubricant 1118. These exact catalog links support navigation, not new applications.
- Historical TI15/1999 names FR 125, FR 135 and FR 145 and series 4126, 4135, 4113. The retained exact-model IPL groups these machines under 4135; that navigation grouping is not a series-equivalence or parts-interchange claim. No serial cutoff or later-model applicability is supplied.
Source: TI 15/1999, p. 1 · TI 15/1999, p. 2 · TI 15/1999, p. 3 · TI 15/1999, p. 4 — All four original pages; contents and figures, sections 1–6, complete specification and accessory tables, repair dependencies and colophons.
Part numbers (5)
- 0781 120 1109 — Hedge-trimmer gear lubricant, 80 g / 3 ozDrive shaft in tube · FR 125 / FR 135 / FR 145; TI15/1999 accessory listing
- 0781 120 1110 — Hedge-trimmer gear lubricant, 225 g / 8 ozDrive shaft in tube · FR 125 / FR 135 / FR 145; TI15/1999 accessory listing
- 0781 120 1117 — Brushcutter gear lubricant, 80 g / 3 ozGearhead · FR 125 / FR 135 / FR 145; TI15/1999 accessory listing
- 0781 120 1118 — Brushcutter gear lubricant, 225 g / 8 ozGearhead · FR 125 / FR 135 / FR 145; TI15/1999 accessory listing
- 0781 417 1315 — Special oil, 100 ml / 3.5 fl.ozRewind spring and rope-rotor bearing bore · FR 125 / FR 135 / FR 145; TI15/1999 accessory listing
Wrong number or missing part for the FR 125, FR 135, FR 145? Report a correction →