← FR 125, FR 135, FR 145 · FS 108 · FR 108

Stihl 4135 · Section D · 4 of 14 · 14 parts

Cover, Fuel tank

Fits FS 108.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
11011121314233456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (14)

PosPart numberDescriptionQty
1 4135 080 1600 Shroud Fitment / change note → 1
2 9416 868 6510 Hollow rivet 6.5x0.5x3.0 2
3 9022 341 0960 Spline screw IS-M5x12 → replaced by 9022 341 0980 TI 3/2006 2
4 4135 967 1505 Model plate FS 108 1
5 4135 350 0400 Fuel tank 1
6 4112 358 8100 Insert 4
7 4128 350 0505 Filler cap 1
8 0000 350 0900 Rope 1
9 0000 353 0800 Filler cap retainer 1
10 0000 350 3502 Pickup body 1
11 0000 358 1800 Filter 1
12 4126 358 7700 Hose with grommet 1
13 9307 021 0120 Washer 5.3 4
14 9022 341 0980 Spline screw IS-M5x16 4

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · FS 108 / FR 108

FS/FR108 shroud: same number, emissions symbol restriction

Only shrouds without the open-one-turn symbol may be used on emissions-approved machines.

  • Emissions-approved H/L user adjustment is limited to maximum 90 degrees. Therefore the OPEN 1 TURN symbol is omitted from their shrouds. Figure 354TI012 crosses out that setting symbol; it does not delete H, L or LD identification. ONLY SHROUDS WITHOUT THE SETTING SYMBOL MAY BE USED on emissions-approved machines.
  • To standardize parts the TI says the setting symbol will be omitted on all future machines/shrouds in this FS108/FR108 context; it does not establish all-model fitment. Both original and modified table columns use THE SAME NUMBER 4135 080 1600. Number alone does not identify symbol state.
  • Introduction: emissions machines FROM START OF PRODUCTION; non-emissions machines IN PROGRESS. Unmodified parts will be supplied until existing factory stocks are exhausted. That old-stock statement DOES NOT override the emissions-only no-symbol restriction. No serial cutoff or production date is provided.
  • Later exact-model cover/fuel-tank IPLs retain shroud 4135 080 1600 at key 1 without encoding symbol state. Last TI references FS108 37.94 and FR108 05.95 are bibliographic. Footer June 09, 1995, Andreas Stihl D1/MTK-na, Technical Documentation; issue 15.95 is not a production date.
  • Historical TI guidance only, specific to FS 108 / FR 108 and the stated carburetor version. Exact-model IPL links are navigation, not unrestricted interchange. No hardware operation was performed.

Source: TI 15/1995, p. 10 · TI 15/1995, p. 11 — Complete bulletin: emissions carburetor and shroud; all text, figures, flowchart, tables and footer.

Part numbers (1)
  • 4135 080 1600 — Shroudsame number before/after symbol deletion; inspect version · FS 108; FR 108

Wrong number or missing part for the FS 108? Report a correction →