← FR 125, FR 135, FR 145 · FS 108 · FR 108

Stihl 4135 · Section C · 3 of 14 · 18 parts

Ignition system, Clutch

Fits FS 108.

Parts diagrams →

Historical fitment & changes (3) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131414151623456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (18)

PosPart numberDescriptionQty
1 4129 400 1200 Flywheel Fitment / change note → 1
2 9291 021 0180 Washer 8.4 1
3 9210 260 1100 Hexagon nut M8 1
4 4135 400 1300 Ignition module Fitment / change note → 1
5 not sold separately Ignition lead 175 mm not available as a separate item 1
6 0000 989 1010 Grommet 1
7 9022 341 1019 Spline screw IS-M5x20 2
8 4135 160 2001 Clutch 1
9 4117 162 8900 Washer 2
10 4129 162 8900 Washer 2
11 4135 162 4200 Collar screw 2
12 0000 997 6100 Tension spring 1
13 4129 997 1200 Tension spring 1
14 4117 162 8900 Washer 4
15 0000 961 0803 Ring 2
16 9008 319 1800 Hexagon head screw M8x20 2
Not numbered on the diagram — assemblies, kits and options
— 0000 405 0600 NLA Ignition lead 1 m not illustratedoption 1
— 0000 930 2251 Ignition lead 10 m not illustratedoption 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Historical fitment · FS 108 / FR 108

FS 108 / FR 108: series 4135 replacement ignition assignment

4135 400 1300 with flywheel 4129 400 1200; 175 mm ignition lead.

  • Printed series 4135. Use 4135 400 1300 with flywheel 4129 400 1200.
  • Printed ignition-lead length: 175 mm (6 7/8 in). Preserve both printed units.
  • TI01/1999 lists replacement combinations for the then-current machines, not every earlier configuration. Older machines are referred to Spare Parts for Previous Models in their own illustrated parts lists; no serial cutoff is supplied here.
  • Use only the listed ignition-module/flywheel combinations. The source warns that incorrect combinations can cause excessive RPM or running in reverse; sharing a module number does not make all flywheels interchangeable.
  • Universal replacement modules may differ from production modules in maker, shape and part number. The source describes installation/function compatibility within its assignments, not universal compatibility or a project hardware test.
  • Some replacement modules require shortening the ignition lead and/or short-circuit wire and crimping a different short-circuit connector. The table gives ignition-lead lengths only; it supplies neither a short-circuit-wire length nor a connector part number. Do not infer that every row needs modification.
  • Only the named models and printed series are covered. A shared IPL sheet does not extend this assignment to unnamed models or modern MS equivalents. This 1999 USA bulletin is historical guidance, not current availability.

Source: TI 1/1999, p. 1 · TI 1/1999, p. 3 — 1.1 general restrictions and 1.2.2 power-tool assignments.

Part numbers (2)
  • 4135 400 1300 — Replacement ignition moduleAssigned component · FS 108 / FR 108, printed series 4135, listed combination only
  • 4129 400 1200 — Assigned flywheelRequired pairing · FS 108 / FR 108, printed series 4135

Service note · FS 88 / FS 108

FS 88 / 108: ignition timing and lead-length conflict

The original prints 200 mm as 8¾ inches; those lengths are not equivalent.

  • Electronic ignition comprises flywheel and ignition module with integral trigger unit. Flywheel does NOT need removal to access the module. Air gap 0.1–0.5 mm (0.004–0.020 in).
  • At 8000 rpm, timing BEFORE TOP DEAD CENTER: FS 88 1.25–1.75 mm (0.05–0.07 in); FS 108 1.45–2.05 mm (0.06–0.08 in). Do not swap the model-specific ranges or treat them as crankshaft degrees.
  • Ignition lead length is printed as 200 mm (8¾ in). SOURCE CONFLICT: 200 mm is about 7.87 in, whereas 8¾ in is 222.25 mm. Neither value is silently corrected or declared verified; confirm the exact replacement configuration before cutting a lead.
  • Suppressed plug Bosch WSR 6 F or NGK BPMR 7 A; heat range 200; electrode gap 0.5 mm (0.020 in); M14x1.25 thread, 9.5 mm (0.37 in) thread length. This historical listing is not a cross-brand heat-range conversion rule.
  • Historical TI 37/1994 source guidance, not present-day approval, current stock or a physical interchange test. No serial cutoff is supplied. Exact-model catalog links are navigation, not proof that later service parts or carburetor variants equal the original configuration. No hardware operation was performed.

Source: TI 37/1994, p. 3 · TI 37/1994, p. 5 — FS 88 / 108: ignition timing and lead-length conflict.

No additional parts-table entry added.

Service note · FS 88 / FS 108

FS 88 / 108: engine and ignition tightening torques

Model-specific clutch and crankcase fasteners must not be interchanged.

  • All pairs below are Nm / lbf.ft as printed; fastener identity and component remain part of the specification. No tightening sequence, lubricant or thread-locker condition is supplied by this table.
  • Crankcase spline screws: FS 88 IS-M 5x25, FS 108 IS-M 5x30, both 10.5 / 7.7. Cylinder to crankcase IS-M 5x16: 10.0 / 7.4. Clutch shoes: FS 88 flange screw M6 8.0 / 5.9; FS 108 hex-head M8x20 17.0 / 12.5.
  • Muffler to cylinder IS-M 5x16 and muffler to crankcase IS-M 5x12: each 10.5 / 7.7. Cover plate to muffler IS-M 4x12: 3.5 / 2.6. Clutch housing IS-M 5x16: 9.5 / 7.0. Flywheel and carrier M8 hexagon nuts: each 17.0 / 12.5.
  • Ignition module IS-M 5x20: 7.5 / 5.5. Spark plug M14x1.25: 19.0 / 14.0. Do not apply the FS 108 clutch-shoe torque to FS 88.
  • Historical TI 37/1994 guidance, not current stock, a complete repair procedure or physical verification. Exact-model catalog links are navigation, not proof that later configurations are identical. No hardware operation was performed.

Source: TI 37/1994, p. 8 — engine and ignition tightening torques.

No additional parts-table entry added.

Wrong number or missing part for the FS 108? Report a correction →