← FR 125, FR 135, FR 145 · FS 108 · FR 108

Stihl 4135 · Section M · 12 of 14 · 22 parts

Deflector

Fits FS 108.

Parts diagrams →

Historical fitment & changes (3) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110101111121213141515161617181922220333456778899
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (22)

PosPart numberDescriptionQty
1 4119 710 8103 Deflector 1
2 0000 716 3101 Backing plate 1
3 9022 373 1025 Spline screw IS-M5x23 4
4 4119 716 3203 Skirt 1
5 4119 710 6000 Blade 1
6 4118 713 4105 Blade 1
7 9074 478 4125 Pan head self-tapping screw IS-5x14 2
8 not sold separately O-ring 4x2 not available as a separate item 4
9 0000 716 3100 Backing plate 1
10 9074 478 2970 Pan head self-tapping screw IS-P4x10 2
11 9022 371 1020 Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 4
12 9022 341 0980 Spline screw IS-M5x16 4
13 4133 007 1007 Deflector kit 1
14 4133 007 1008 Deflector kit 1
15 4133 713 4110 Blade 1
16 9074 478 4405 Pan head self-tapping screw IS-P6x14 1
17 4117 710 8200 Limit stop Ø 200 Fitment / change note → 1
18 not sold separately O-ring 4x2 not available as a separate item 3
19 9022 371 1020 Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 3
20 9022 341 0980 Spline screw IS-M5x16 3
Not numbered on the diagram — assemblies, kits and options
— 4119 007 1027 Deflector kit 1
— 0000 007 1300 Set of O-rings N 4x2-EPDM70 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · FS 88 / FS 108

FS 88 / 108: seven listed cutting heads

Historical approval names and numbers remain distinct; guard and line requirements still apply.

  • Page 2 drawings and keys 1–7 match the seven listed heads. This does not establish compatibility of later heads sharing a name. Nylon-line specifications are separately modelled from page 6.
  • Universal deflector requires its skirt before using cutting heads; a line-limiting blade must always be fitted before using heads with nylon line. Do not treat a head part number as a complete safe mounting kit. Metal cutting tools must not be fitted or used on loop-handle versions.
  • Historical TI 37/1994 source guidance, not present-day approval, current stock or a physical interchange test. No serial cutoff is supplied. Exact-model catalog links are navigation, not proof that later service parts or carburetor variants equal the original configuration. No hardware operation was performed.

Source: TI 37/1994, p. 2 · TI 37/1994, p. 4 · TI 37/1994, p. 6 — FS 88 / 108: seven listed cutting heads.

Part numbers (7)
  • 4002 710 2140 — 1 Supercut 2-2 cutting headhistorical listed item · FS 88 / 108: seven listed cutting heads
  • 4002 710 2162 — 2 Supercut 20-2 cutting headhistorical listed item · FS 88 / 108: seven listed cutting heads
  • 4002 710 2108 — 3 Autocut 25-2 cutting headhistorical listed item · FS 88 / 108: seven listed cutting heads
  • 4002 710 2107 — 4 Autocut 30-2 cutting headhistorical listed item · FS 88 / 108: seven listed cutting heads
  • 4002 710 2120 — 5 Polymatic 30-2 cutting headhistorical listed item · FS 88 / 108: seven listed cutting heads
  • 4111 710 2100 — 6 Polycut 40-3 cutting headhistorical listed item · FS 88 / 108: seven listed cutting heads
  • 4001 713 2100 — 7 Fixed Line Headhistorical listed item · FS 88 / 108: seven listed cutting heads

Service note · FS 88 / FS 108

FS 88 / 108: deflector kits and mandatory skirt

A deflector alone is not the complete kit with blade and mounting hardware.

  • Deflector for cutting heads (8) and universal deflector (9) screw rigidly to the gearhead flange in a fixed position relative to the tool. Skirt (10) extends universal deflector (9) and MUST ALWAYS be fitted before using cutting heads. Line-limiting blade (11) MUST ALWAYS be fitted before using heads with nylon line; drawing shows it on both depicted guard configurations.
  • Universal kit 4119 007 1013 includes deflector, skirt, line-limiting blade and mounting hardware; 4119 713 4500 is DEFLECTOR ONLY. Cutting-head kit 4133 007 1002 includes deflector, line-limiting blade and hardware; 4133 710 8101 is DEFLECTOR ONLY.
  • Circular-saw-blade limit stop 4117 710 8200 includes mounting hardware. It does not authorize metal cutting tools on loop-handle versions; that prohibition remains. No unprinted kit component numbers inferred.
  • Historical TI 37/1994 source guidance, not present-day approval, current stock or a physical interchange test. No serial cutoff is supplied. Exact-model catalog links are navigation, not proof that later service parts or carburetor variants equal the original configuration. No hardware operation was performed.

Source: TI 37/1994, p. 2 · TI 37/1994, p. 4 · TI 37/1994, p. 6 — FS 88 / 108: deflector kits and mandatory skirt.

Part numbers (5)
  • 4119 007 1013 — Universal deflector complete kithistorical listed item · FS 88 / 108: deflector kits and mandatory skirt
  • 4119 713 4500 — Universal deflector onlyhistorical listed item · FS 88 / 108: deflector kits and mandatory skirt
  • 4133 007 1002 — Cutting-head deflector kithistorical listed item · FS 88 / 108: deflector kits and mandatory skirt
  • 4133 710 8101 — Cutting-head deflector onlyhistorical listed item · FS 88 / 108: deflector kits and mandatory skirt
  • 4117 710 8200 — Circular-saw limit stop with hardwarehistorical listed item · FS 88 / 108: deflector kits and mandatory skirt

Service note · FS 88 / FS 108

FS 88 / 108: line sizes and Polycut blades

Red 2.7 mm line is listed only for Fixed Line Head and Polycut 40-3.

  • Orange 2.4 mm (0.095 in) line applies to Supercut 2-2, Supercut 20-2, Autocut 25-2, Autocut 30-2, Polymatic 30-2, Fixed Line Head and Polycut 40-3. The five numbered packages contain 15, 44, 87, 261 and 434 m respectively. Printed feet are retained as historical rounded labels, not precision conversions.
  • Red 2.7 mm (0.105 in) line applies ONLY to Fixed Line Head and Polycut 40-3, in 10.7 m or 72.0 m packages. Do not extend the red-line application to all seven heads. Package lengths are not installed line lengths.
  • Polycut 40-3 thermoplastic-blade set 4111 007 1001 contains 12 blades, NOT twelve blades installed at once. These are not the prohibited metal cutting tools.
  • Historical TI 37/1994 source guidance, not present-day approval, current stock or a physical interchange test. No serial cutoff is supplied. Exact-model catalog links are navigation, not proof that later service parts or carburetor variants equal the original configuration. No hardware operation was performed.

Source: TI 37/1994, p. 2 · TI 37/1994, p. 6 — FS 88 / 108: line sizes and Polycut blades.

Part numbers (8)
  • 0000 930 2243 — Orange 2.4 mm line, 15 m (50 ft)historical listed item · FS 88 / 108: line sizes and Polycut blades
  • 0000 930 2244 — Orange 2.4 mm line, 44 m (143 ft)historical listed item · FS 88 / 108: line sizes and Polycut blades
  • 0000 930 2245 — Orange 2.4 mm line, 87 m (285 ft)historical listed item · FS 88 / 108: line sizes and Polycut blades
  • 0000 930 2246 — Orange 2.4 mm line, 261 m (855 ft)historical listed item · FS 88 / 108: line sizes and Polycut blades
  • 0000 930 2247 — Orange 2.4 mm line, 434 m (1425 ft)historical listed item · FS 88 / 108: line sizes and Polycut blades
  • 0000 930 2218 — Red 2.7 mm line, 10.7 m (35 ft)historical listed item · FS 88 / 108: line sizes and Polycut blades
  • 0000 930 2224 — Red 2.7 mm line, 72.0 m (235 ft)historical listed item · FS 88 / 108: line sizes and Polycut blades
  • 4111 007 1001 — Set of 12 thermoplastic blades for Polycut 40-3historical listed item · FS 88 / 108: line sizes and Polycut blades

Wrong number or missing part for the FS 108? Report a correction →