← Special-purpose Units & other equipment · series 4137

Stihl 4137 · Section V · 21 of 21 · 9 parts

Transport guard, Tools

Fits FR 85 T, FR 85.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
123456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (9)

PosPart numberDescriptionQty
1 4116 790 3901 Transport guard Ø 350 1
2 4116 792 4300 Clamping wire 1
3 4128 890 3400 Combination wrench 1
4 4130 893 7800 Locking pin 1
5 0000 890 2300 NLA Screwdriver option 1
6 0000 890 2305 Screwdriver 1
7 0000 884 0307 Safety glasses 1
8 0000 891 0801 NLA Tool roll option 1
9 0783 830 2000 Tube of sealant Dirko HT red option 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Historical fitment · FR 85

FR 85: starter, guard, sharpening aid and separate lubricants

Drive/flexible-shaft grease differs from gearbox grease; transport guard covers four specified metal tools.

  • Transport guard 4119 790 3906 is listed for cutting blades 230-2, 230-4, 230-8 AND brush knife 250-3. It is not a running deflector. Later catalog V sheet has guard 4116 790 3901, diameter 350; no supersession/equivalence to the 1998 number is established by this TI. Preserve both sources independently.
  • ElastoStart 0000 190 3400 is the rewind-starter GRIP WITH ROPE; separate ElastoStart rope is printed 0000 195 8200. The retained starter sheet contains the exact grip and separate later rope options. Do not silently substitute a later rope length/diameter or resolve the earlier TI41/1997 rope-number conflict from this later listing.
  • STIHL gear lubricant for DRIVE SHAFT AND FLEXIBLE SHAFT: 80 g / 3 oz tube 0781 120 1109; 225 g / 8 oz tube 0781 120 1110. STIHL gear lubricant for GEARBOX: 80 g / 3 oz tube 0781 120 1117; 225 g / 8 oz tube 0781 120 1118. Identical generic lubricant labels do NOT make these two application groups interchangeable; no dosage or interval is supplied.
  • STIHL special oil 0781 417 1315, 100 ml / 3.5 fl.oz bottle: rewind spring AND BEARING BORE IN ROPE ROTOR. Sharpening template 4020 890 5500 is listed for BRUSH KNIFE; no blade angle, sharpening limit or circular-saw setting tool is specified here.
  • Historical FR 85, series 4137, as described in TI34/1998. Shared FR 85 T catalog sheets do not extend this note to FR 85 T or other variants. No hardware operation was performed; no physical interchange test or current stock claim.

Source: TI 34/1998, p. 4 — Section 4 accessory table and section 4.2 sharpening aid, every row and application.

Part numbers (9)
  • 4119 790 3906 — Transport guard for four named metal cutting toolsTransport accessory · FR 85; exact historical application only
  • 0000 190 3400 — ElastoStart grip with ropeStarter accessory · FR 85; exact historical application only
  • 0000 195 8200 — ElastoStart ropeSeparate historical starter rope · FR 85; exact historical application only
  • 0781 120 1109 — Shaft lubricant, 80 gDrive shaft and flexible shaft only · FR 85; exact historical application only
  • 0781 120 1110 — Shaft lubricant, 225 gDrive shaft and flexible shaft only · FR 85; exact historical application only
  • 0781 120 1117 — Gearbox lubricant, 80 gGearbox application · FR 85; exact historical application only
  • 0781 120 1118 — Gearbox lubricant, 225 gGearbox application · FR 85; exact historical application only
  • 0781 417 1315 — STIHL special oil, 100 mlRewind spring and rope-rotor bearing bore · FR 85; exact historical application only
  • 4020 890 5500 — Sharpening templateBrush knife · FR 85; exact historical application only

Wrong number or missing part for the FR 85 T, FR 85? Report a correction →