Stihl 4137 · Assembly · 25 of 25 · 25 parts
AB Tools, Extras
Fits FS 75, FS 80, FS 80 R, FS 85, FS 85 R, FS 85 T, FS 85 RX.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (25)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4128 890 3400 | Combination wrench Fitment / change note → | 1 |
| 2 | 4130 893 7800 | Locking pin | 1 |
| 3 | 0000 890 2300 NLA | Screwdriver | 1 |
| 4 | 0000 890 2305 | Screwdriver | 1 |
| 5 | 4119 710 9001 | Full harness | 1 |
| 6 | 4119 710 6306 | Backplate with strap | 1 |
| 7 | not sold separately | Strap 38x780mm / 1.5x30.7'' not available as a separate item | 1 |
| 8 | not sold separately | Strap 25 mm x 1.18 m / 1x46.5'' not available as a separate item | 1 |
| 9 | 4203 792 7200 | Slide | 3 |
| 10 | 4119 718 6300 | Slide | 1 |
| 11 | 4119 718 6310 | Slide | 2 |
| 12 | 4119 710 6400 | Buckle | 1 |
| 13 | 4119 718 7400 | Guard plate | 1 |
| 14 | 4119 710 6906 | Spring safety hook | 1 |
| 15 | 9408 021 4530 | Rivet shank 4x8x6 | |
| 16 | 9409 021 4420 | Rivet head 4x8 | |
| 17 | 4119 710 9012 | Harness | 1 |
| 18 | not sold separately | Strap 25 mm x 1.86 m / 1x73'' not available as a separate item | 1 |
| 19 | 4119 718 6320 NLA | Slide | 1 |
| 20 | 0000 884 0307 | Safety glasses | 1 |
| 21 | 0000 891 0801 NLA | Tool roll option | 1 |
| 22 | 0783 830 2000 | Tube of sealant Dirko HT red option | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 0000 930 2242 | Webbing 38 mm x 5 m / 1.5x197'' not illustratedoption | 1 |
| — | 0000 930 2241 | Webbing 25 mm x 10 m / 1'' x 33' not illustratedoption | 1 |
| — | 4119 710 6406 | Buckle with strap | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · FS 75 / FS 80 / FS 85 / HS 75 / HS 80 / HS 85
FS and HS: combination wrench gains size13 and a longer size19 sleeve
4128 890 3400 replaces 4119 890 3400 in supplied equipment.
continuously — Continuous introduction; no numeric boundary supplied for this particular change.
- Section 2 is limited to FS AND HS models named on the cover. Standardization changes the supplied combination wrench from 4119 890 3400 (1) to 4128 890 3400 (2). It adds a SIZE 13 HEX KEY (3); the SIZE 19 SLEEVE (4) is APPROXIMATELY10 mm (3/8 inch) LONGER.
- Drawing366TI022 KN labels original sleeve40 mm (1.57 inch) and replacement50 mm (2 inch). These are the drawn sleeve spans, not overall wrench length. Modification continuous; ORIGINAL REMAINS AVAILABLE. No recall or replacement requirement for existing tools is stated.
- Historical TI 41/1997 evidence for the named models and configurations only; not present stock, a universal serial-to-model registry or verified physical interchange. No hardware operation was performed.
Source: TI 41/1997, p. 5 — Entire section 2, drawing 366TI022 KN, summary and remark.
Part numbers (2)
- 4119 890 3400 — Original combination wrench; drawing 1Remains available · Only the named TI 41/1997 configurations and conditions
- 4128 890 3400 — New combination wrench; drawing 2New supplied version · Only the named TI 41/1997 configurations and conditions
Wrong number or missing part for the FS 75, FS 80, FS 80 R, FS 85, FS 85 R, FS 85 T, FS 85 RX? Report a correction →