Stihl 4137 · Section U · 19 of 22 · 13 parts
Blade drive gear 0°, 30°, 0° - 90° (24.2005)
Fits HL 75, HL 75 K.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (13)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4230 640 0501 | Gear housing Fitment / change note → | 1 |
| 2 | 9513 003 0912 | Needle cage 8x12x8 | 2 |
| 3 | 4226 641 6500 | Screw plug Fitment / change note → | 2 |
| 4 | 9381 003 2070 | Cylindrical pin 4x12 | 2 |
| 6 | 4230 642 4800 | Thrust plate | 2 |
| 7 | 4230 642 6501 | Connecting rod | 2 |
| 8 | 4230 640 7501 | Spur gear | 1 |
| 9 | 4226 649 0301 | Gasket | 1 |
| 10 | 4230 649 0300 | Gasket | 1 |
| 11 | 4230 640 5801 | Gearbox cover Fitment / change note → | 1 |
| 12 | 9022 313 0680 | Spline screw IS-M4x16 | 6 |
| 13 | 0000 967 3730 | Warning pictogram | 1 |
| 14 | 0781 120 1109 | Gear lubricant 80 g option | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Conditional replacement · HL 75
HL 75: production and replacement grease-port covers differ
Housing 0501 and spare cover 5801 replace 0500/5800; a replacement cover retains its filler hole.
- The grease filler moves from the underside cover to the top of the blade-drive housing. Figure 389TI006 KN points to the new top filler opening. Production covers have no filler hole; replacement covers with a filler hole and screw plug remain available. Do not assume the supplied spare duplicates the production-line cover.
- Table items 26 and 27 are housing 4230 640 0501 and cover 4230 640 5801; each includes screw plug 4226 641 6500 (item 28). Remark 2 makes these universal replacements for all HL 75 versions in this TI: straight, 30° and adjustable 0–90°, not all later products.
- The separate page 4 summary replaces housing 4230 640 0500 with 0501 and cover 4230 640 5800 with 5801. Its remark 1 says the originals are no longer available from the factory. Screw plug 4226 641 6500 is unchanged. These availability remarks are independent of the harness table below.
- The text connects the replacement-cover renumbering with future use in a new product line but does not name that line. No additional future part number, grease amount, lubricant specification or service interval is supplied here. All other blade-drive parts remain as before.
- Historical TI 44/1998 names HL 75, series 4230. Notes are located on later HL 75/HL 75 K sheets under series 4137, but do not extend the TI to HL 75 K, FH, HL-KM or later 135° heads. Introduction is in progress; no serial cutoff or current stock is established.
Source: TI 44/1998, p. 2 · TI 44/1998, p. 3 · TI 44/1998, p. 4 — Items 26–28/remark 2, section 2 grease-hole figure and complete page 4 summary.
Part numbers (5)
- 4230 640 0500 — Original blade-drive gearbox housingReplaced; historical factory supply ended · HL 75; exact 1998 variant and remark scope only
- 4230 640 0501 — New blade-drive gearbox housingUniversal replacement within TI model/version scope · HL 75; exact 1998 variant and remark scope only
- 4230 640 5800 — Original blade-drive gearbox coverReplaced; historical factory supply ended · HL 75; exact 1998 variant and remark scope only
- 4230 640 5801 — Replacement cover with filler holeUniversal replacement within TI model/version scope · HL 75; exact 1998 variant and remark scope only
- 4226 641 6500 — Screw plugUnchanged; included with each housing and cover · HL 75; exact 1998 variant and remark scope only
Wrong number or missing part for the HL 75, HL 75 K? Report a correction →