Stihl 4201 · Section H · 8 of 20 · 22 parts
Filter housing, Air filter
Fits TS 350 AVE, TS 360.
Historical fitment & changes (3) — includes parts and conditions not shown on this drawing.
Parts (22)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4201 140 2801 | Filter housing | 1 |
| 2 | 1108 084 8000 | Insulating plate | 1 |
| 3 | 9441 065 1870 | Round head rivet 3x6 | 2 |
| 4 | 4201 967 1503 | Model plate TS 360 Fitment / change note → | 1 |
| 5 | 4201 967 1501 | Model plate TS 360 AVSE Fitment / change note → | 1 |
| 6 | 0000 974 1000 | Round head rivet 3x6 Fitment / change note → | 2 |
| 7 | 4201 148 1001 | Stud | 1 |
| 8 | 9022 341 1310 | Spline screw IS-M6x18 | 3 |
| 9 | 9291 021 0140 | Washer 6.4 | 1 |
| 10 | 4201 141 2200 | Manifold | 1 |
| 11 | 4201 121 8600 | Washer | 1 |
| 12 | 9022 341 0960 | Spline screw IS-M5x12 → replaced by 9022 341 0980 TI 3/2006 | 2 |
| 13 | 4201 140 1802 | Auxiliary filter | 1 |
| 14 | 4201 141 0300 | Main filter | 1 |
| 15 | 4201 141 0310 | Prefilter | 1 |
| 16 | 4201 140 2200 | Flange Fitment / change note → | 1 |
| 17 | 9646 945 1050 | O-ring 11x1.5 | 1 |
| 18 | 9645 945 5190 | O-ring 52x3 | 1 |
| 19 | 4201 140 1000 | Filter cover Fitment / change note → | 1 |
| 20 | 4201 140 9301 | Twist lock Fitment / change note → | 1 |
| 21 | 0000 967 3693 | Warning pictogram Filler cap | 1 |
| 22 | 0000 967 3502 | Instruction label | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · TS 360
TS 360: revised filter-cover screw has its own serial cutoff
4201 140 9301 replaces 4201 140 9300; filter-cover number stays 4201 140 1000.
X 27 592 415 — Introduction of this specific modification on the named models; not a production range or interchange guarantee.
- TS 360 ONLY: screw fastener changes from X 27 592 415, separate from the wing-nut cutoff X 27 499 236. The revised fastener can also be installed with the ORIGINAL combination wrench despite the new 19 mm tool-kit context.
- Only new fastener 4201 140 9301 is factory-available; original 4201 140 9300 is no longer supplied. Replacement cover 4201 140 1000 keeps its number and includes the revised fastener (item 1); only the modified cover is supplied. Other parts remain unchanged.
- Historical TI09/1994 guidance for the named TS 350 / TS 360 models only; no successor or TS 350 AVE applicability inferred from a shared IPL sheet. Across-flats dimensions describe wrench sizes, not thread diameters. Factory stock statements are historical, not current availability. MOQ columns are commercial order quantities. No physical interchange test was performed.
Source: TI 9/1994, p. 5 · TI 9/1994, p. 6 — TS 360: revised filter-cover screw has its own serial cutoff.
Part numbers (3)
- 4201 140 1000 — Filter cover including fastenerunchanged number · TS 360: revised filter-cover screw has its own serial cutoff
- 4201 140 9300 — Screw fasteneroriginal; no longer supplied · TS 360: revised filter-cover screw has its own serial cutoff
- 4201 140 9301 — Screw fastener, item 1new version · TS 360: revised filter-cover screw has its own serial cutoff
Service note · TS 360
TS 360: new filter wing nut supplied only with flange
Unchanged flange 4201 140 2200 includes the revised wing nut from a separate cutoff.
X 27 499 236 — Introduction of this specific modification on the named models; not a production range or interchange guarantee.
- TS 360 ONLY: wing nut changes from X 27 499 236, NOT the cover-fastener cutoff X 27 592 415. The revised wing nut can also be installed with the ORIGINAL combination wrench.
- To ensure interchangeability, the new wing nut is supplied ONLY together with flange 4201 140 2200 (item 2, including wing nut item 3). Flange number is unchanged; only modified flange is available. Original wing nut 4201 140 9500 is no longer factory-available; the revised nut is NOT available separately and has no separate replacement number in this TI. The -*- entry is not an order number. All other parts remain unchanged.
- Historical TI09/1994 guidance for the named TS 350 / TS 360 models only; no successor or TS 350 AVE applicability inferred from a shared IPL sheet. Across-flats dimensions describe wrench sizes, not thread diameters. Factory stock statements are historical, not current availability. MOQ columns are commercial order quantities. No physical interchange test was performed.
Source: TI 9/1994, p. 5 · TI 9/1994, p. 6 — TS 360: new filter wing nut supplied only with flange.
Part numbers (2)
- 4201 140 2200 — Flange including revised wing nutunchanged assembly number · TS 360: new filter wing nut supplied only with flange
- 4201 140 9500 — Wing nutoriginal; no longer supplied · TS 360: new filter wing nut supplied only with flange
Historical fitment · TS 360
TS 360: plastic nameplate requires countersunk filter housing
X 33 844 980; 4201 967 1501 → 4201 967 1503; original aluminium plate/rivet retained.
X 33 844 980 — TS 360 nameplate change only; filter housing must have countersunk holes.
- For TS 360, from machine number X 33 844 980, the riveted aluminium nameplate changes to clip-in plastic. It is pushed into the filter housing and held by TWO retaining lugs; mounting holes are countersunk. The other model has a different nameplate serial and location.
- Plastic nameplates CANNOT be fitted to the original cast arm or filter housing because those versions lack countersunk mounting holes. No field-drilling or countersinking conversion is authorized by this note; no hole dimensions, angle or substitute body is specified.
- The TS 360 table row changes 4201 967 1501 to 4201 967 1503. Original aluminium nameplates and round head rivets 0000 974 1000 (3 x 6) remain available for older machines. The new rivet cell is a dash, not deletion of original repair supply. No rivet quantity is printed.
- The opening paragraph and the separate table footer agree on the model-specific serial assignments in the original scan. Garbled extraction around the TS 360 parenthesis does not alter those assignments. This plate change does not imply the starter change occurred at the same number.
- The retained exact-model filter-housing IPL lists old 4201 967 1501 as “Model plate TS 360 AVSE”, while this TI table calls it TS 360. Both labels are preserved; this unresolved variant-label difference does not extend this bulletin to TS 360 AVSE or silently rewrite the canonical IPL. New 4201 967 1503 is labeled TS 360 in both sources.
- Historical TI 10/1996 evidence for TS 350 and TS 360, series 4201. Shared catalog sheets do not add TS 350 AVE, TS 510 or TS 760. No hardware operation was performed; factory availability is historical, not current stock. Starter and the two model-specific nameplate changeovers must remain separate.
Source: TI 10/1996, p. 2 — TS 360: plastic nameplate requires countersunk filter housing.
Part numbers (3)
- 4201 967 1501 — TS 360 original aluminium nameplateretained for older machines · TS 360; TI10/1996 specified configuration
- 4201 967 1503 — TS 360 plastic nameplaterequires modified countersunk filter housing · TS 360; TI10/1996 specified configuration
- 0000 974 1000 — Round head rivet 3 x6retained for original aluminium plate; quantity unspecified · TS 360; TI10/1996 specified configuration
Wrong number or missing part for the TS 350 AVE, TS 360? Report a correction →