← Cut-off machines · series 4201

Stihl 4201 · Section J · 9 of 20 · 28 parts

Handle frame, Handlebar

Fits TS 350 AVE, TS 360.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131314141415161718192222021222324252627345678999
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (28)

PosPart numberDescriptionQty
1 4201 790 5601 Handle frame 1
2 4201 790 9900 Annular buffer 3
3 9022 341 1310 Spline screw IS-M6x18 4
4 4201 791 0600 Handle molding 1
5 1106 182 0805 Lockout lever 1
6 4201 182 4500 Torsion spring 1
7 4201 182 1000 Throttle trigger 1
8 4201 180 1101 Throttle cable 1
9 9074 478 4425 Pan head self-tapping screw IS-P6x19 4
10 1113 182 8901 Pin 1
11 1113 182 9305 Starting throttle lock 1
12 0000 997 0603 Compression spring 1
13 1121 791 1200 Retainer 2
14 1118 791 6105 Pan head screw 3
15 4201 792 9301 Rubber buffer 1
16 9307 021 0100 Washer 4.3 1
17 9102 021 0810 Self-tapping screw 4.2x9.5 1
18 4201 790 1702 Handlebar with hose 1
19 not sold separately Handle hose 520 mm / 20 1/2'' 1
20 4201 791 7605 Support 1
21 9022 341 1400 Spline screw IS-M6x40 2
22 4201 791 1900 Handlebar support 1
23 9490 000 7850 Narrow V-belt 9.7x850 1
24 4201 701 0203 Cast arm 1
25 9022 341 1300 Spline screw IS-M6x20 2
26 4201 708 8403 Hexagon head screw M10x40 1
27 0000 967 3702 Warning pictogram TS 1
Not numbered on the diagram — assemblies, kits and options
— 0000 791 2009 Handle hose Ø 19 mm x 5 m / 3/4x197'' option 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · TS 360

TS 360: model-specific raised machine support

New support improves stability and cutting-wheel ground clearance when the machine is set down.

X 28 639 550 — Introduction of this specific modification on the named models; not a production range or interchange guarantee.

  • TS 360 machine support 4201 791 7602 changes to 4201 790 7601. TS 360 introduction is from X 28 639 550; do not assign that cutoff to TS 350.
  • Original support remains factory-supplied only while stocks last. Illustrated fitting instructions are supplied with each new support; this TI does not reproduce them. The two model-specific support pairs are not a cross-model interchange claim.
  • Historical TI09/1994 guidance for the named TS 350 / TS 360 models only; no successor or TS 350 AVE applicability inferred from a shared IPL sheet. Across-flats dimensions describe wrench sizes, not thread diameters. Factory stock statements are historical, not current availability. MOQ columns are commercial order quantities. No physical interchange test was performed.

Source: TI 9/1994, p. 1 — TS 360: model-specific raised machine support.

Part numbers (2)
  • 4201 791 7602 — Machine supportoriginal; while stocks last · TS 360: model-specific raised machine support
  • 4201 790 7601 — Raised machine supportnew version · TS 360: model-specific raised machine support

Wrong number or missing part for the TS 350 AVE, TS 360? Report a correction →