Stihl 4201 · Section D · 4 of 22 · 24 parts
Rewind starter
Fits TS 350.
Historical fitment & changes (4) — includes parts and conditions not shown on this drawing.
Parts (24)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1108 080 2101 | Fan housing with rewind starter | 1 |
| 2 | 0000 967 2018 | Nameplate STIHL | 1 |
| 3 | 1108 080 2115 NLA | Fan housing with rewind starter Fitment / change note → no longer available from factory | 1 |
| 4 | 0000 967 2020 NLA | Nameplate STIHL | 1 |
| 5 | 0000 974 1000 | Round head rivet 3x6 | 2 |
| 6 | 1110 084 9102 | Bushing | 1 |
| 7 | 9443 825 7130 | Hollow rivet 7.5x1x6.8 | 3 |
| 8 | 1106 195 9015 | Washer | 1 |
| 9 | 4201 190 0600 | Rewind spring Fitment / change note → | 1 |
| 10 | 1117 190 0601 | Rewind spring Fitment / change note → | 1 |
| 11 | 9099 021 0810 | Self-tapping screw 4.2x9.5 | 1 |
| 12 | 9076 478 2996 | Pan head self-tapping screw P4x12 Fitment / change note → | 2 |
| 13 | 1117 190 1011 | Rope rotor | 1 |
| 14 | 1124 195 7200 | Pawl | 1 |
| 15 | 1107 195 8200 | Starter rope Ø 4.5x1000 mm Fitment / change note → | 1 |
| 16 | 1118 162 8935 | Washer Fitment / change note → | 2 |
| 17 | 1117 195 3500 | Spring | 1 |
| 18 | 1121 195 3400 | Starter grip Fitment / change note → | 1 |
| 19 | 9022 341 1010 | Spline screw IS-M5x18 | 3 |
| 20 | 0000 190 3414 | Starter grip ElastoStart Ø 4.5 mm | 1 |
| 21 | 0000 190 2901 | Starter rope Ø 4.5 mm → replaced by 0000 190 3500 TI 21/2009 | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 1117 007 1014 | Rope rotor kit | 1 |
| — | 0000 930 2200 NLA | Starter rope Ø 4.5 mm x 30.5 m Fitment / change note → option | 1 |
| — | 0000 930 2295 NLA | Starter rope Ø 4.5mm / 28 pieces option | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · TS 350 / TS 360
TS 350 / 360: polymer-housed spring requires modified fan housing
New spring is not a drop-in fit for the original fan housing.
X 29 517 447 — Printed component-specific introduction, not a universal machine cutoff or unrestricted interchange guarantee.
- FROM X 29 517 447 spring 4201 190 0600 with polymer housing protects spring from dust. It fits ONLY LATEST MODIFIED FAN HOUSING: contour changes at anchor and second mounting boss added. Old spring 1117 190 0601 remains spare for older machines. No old-housing modification procedure authorized.
- TWO PT4 x 12 countersunk screws 9076 478 2996 secure spring housing; one replaces previous SINGLE B4.2 x 9.5 screw 9099 021 0818 anchoring spring loop. Old screw remains for older machines. MOQ 1 is not one fitted new screw.
- TS 350 starter assembly 1108 080 2110→1108 080 2115 includes items 1–4; TS 360 assembly 4201 080 2100→4201 080 2104 includes items 2–4. Old complete assemblies no longer factory-available. Original bare TS 350 fan housing 1108 080 2010 only until stocks exhausted and then NOT replaced separately; new bare housing is assembly-only (*-* not orderable). Early no-boss TS 360/350AV exception is separately retained, not overwritten by new introduction serial.
- Historical TI 27/1994 guidance only. No successor or unlisted model applicability inferred. Factory supply and warranty statements are historical, not current availability or entitlement. MOQ columns are order quantities, not fitting quantities. No physical interchange test was performed.
Source: TI 27/1994, p. 1 · TI 27/1994, p. 2 — TS 350 / 360: polymer-housed spring requires modified fan housing.
Part numbers (9)
- 4201 190 0600 — Polymer-housed rewind springnew; modified housing only · TS 350 / 360: polymer-housed spring requires modified fan housing
- 1117 190 0601 — Rewind springold; remains spare · TS 350 / 360: polymer-housed spring requires modified fan housing
- 9076 478 2996 — PT4 x12 countersunk screw2 fitted · TS 350 / 360: polymer-housed spring requires modified fan housing
- 9099 021 0818 — B4.2 x9.5 screwold;1 fitted · TS 350 / 360: polymer-housed spring requires modified fan housing
- 1108 080 2110 — TS350 complete starterold unavailable · TS 350 / 360: polymer-housed spring requires modified fan housing
- 1108 080 2115 — TS350 complete starternew · TS 350 / 360: polymer-housed spring requires modified fan housing
- 4201 080 2100 — TS360 complete starterold unavailable · TS 350 / 360: polymer-housed spring requires modified fan housing
- 4201 080 2104 — TS360 complete starternew · TS 350 / 360: polymer-housed spring requires modified fan housing
- 1108 080 2010 — TS350 bare fan housingold; stocks only · TS 350 / 360: polymer-housed spring requires modified fan housing
Historical fitment · TS 350 / TS 360
TS 350 / TS 360: standard ElastoStart and unchanged fan-housing number
1122 190 3400 grip; complete starter 4201 080 2104 retains its number but only modified version supplied.
X 32 180 714 — Standard ElastoStart change for TS 350 and TS 360; not either nameplate cutoff.
- From machine number X 32 180 714 both named cut-off machines come STANDARD with ElastoStart. The three named components are starter grip, RUBBER ELEMENT and starter rope. The scan has a fourth empty bullet; it does not identify a fourth component.
- New ElastoStart grip 1122 190 3400 replaces original starter grip 1121 195 3400. Remark 2 keeps the original grip available for older machines and other models. This is not the 1128 grip of the FS 360 bulletin or spring-type accessory 0000 190 3400.
- Item 1 fan housing WITH REWIND STARTER remains 4201 080 2104, includes table items 2–6, and only its MODIFIED version is available from factory (remark 1). Items 2/3 and 4/5 are old/new alternatives, not evidence that every assembly contains both grips and both ropes. All other parts as before; no universal internal interchange is promised by the unchanged assembly number.
- Construction, function and benefits are expressly delegated to TI29/1992, absent from retained bulletin and mounted tipages inventories. This remains a named source gap; no spring-accessory construction or rope-repair procedure is substituted.
- Historical TI 10/1996 evidence for TS 350 and TS 360, series 4201. Shared catalog sheets do not add TS 350 AVE, TS 510 or TS 760. No hardware operation was performed; factory availability is historical, not current stock. Starter and the two model-specific nameplate changeovers must remain separate.
Source: TI 10/1996, p. 1 — TS 350 / TS 360: standard ElastoStart and unchanged fan-housing number.
Part numbers (3)
- 4201 080 2104 — Fan housing with rewind startersame number; modified version only; includes2–6 · TS 350, TS 360; TI10/1996 specified configuration
- 1121 195 3400 — Original starter gripretained older-machine/other-model supply · TS 350, TS 360; TI10/1996 specified configuration
- 1122 190 3400 — ElastoStart starter gripnew standard rubber-element version · TS 350, TS 360; TI10/1996 specified configuration
Historical fitment · TS 350 / TS 360
TS 350 / TS 360: second starter-post washer and quantity wording
1118 162 8935 unchanged; table changes quantity 1 → 2, while prose says second washer if required.
X 32 180 714 — Standard ElastoStart change for TS 350 and TS 360; not either nameplate cutoff.
- The prose says a SECOND WASHER will be fitted on the starter post IF REQUIRED to further improve operation. Table item 6 retains number 1118 162 8935 and remark 3 states quantity changed from 1 to 2.
- Both statements are preserved: the tabulated quantity change must not erase the conditional IF REQUIRED installation wording. No measurement, clearance threshold, selection rule or installation stack order is supplied. The TI does not justify blindly adding a washer to every starter.
- Washer item 6 is included in the fan-housing/rewind-starter assembly item 1. The table says all other parts as before; no additional new washer number or third washer is inferred.
- Historical TI 10/1996 evidence for TS 350 and TS 360, series 4201. Shared catalog sheets do not add TS 350 AVE, TS 510 or TS 760. No hardware operation was performed; factory availability is historical, not current stock. Starter and the two model-specific nameplate changeovers must remain separate.
Source: TI 10/1996, p. 1 — TS 350 / TS 360: second starter-post washer and quantity wording.
Part numbers (1)
- 1118 162 8935 — Starter-post washersame number; quantity1→2 in table; second washer if required in prose · TS 350, TS 360; TI10/1996 specified configuration
Historical fitment · TS 350 / TS 360
TS 350 / TS 360: 4.5 mm ElastoStart rope and accessory restrictions
New 1122 190 2900 rope has no printed length; old 1000 mm value is not transferred.
X 32 180 714 — Standard ElastoStart change for TS 350 and TS 360; not either nameplate cutoff.
- Original starter rope 1107 195 8200 is Ø4.5 x 1000 mm. New 1122 190 2900 is Ø4.5 mm ONLY; its length is not stated. Original rope remains available for older machines and other models (remark 2). No old 1000 mm length is assigned to the new rope.
- Original special-accessory rope 0000 930 2200 is Ø4.5 mm x 30.5 m and remains available for older machines/other models (remarks 2/4). New special-accessory rope 0000 930 2268 is Ø4.5 mm (28x), remark 4. The literal 28x qualifier is not converted into an assumed total length, pack count interpretation or cutting scheme.
- Table items 7/8 are special accessories outside item 1 inclusion of items 2–6. The source does not state that the separately numbered grip package includes either accessory rope. Supply dashes do not override the retention remarks.
- Historical TI 10/1996 evidence for TS 350 and TS 360, series 4201. Shared catalog sheets do not add TS 350 AVE, TS 510 or TS 760. No hardware operation was performed; factory availability is historical, not current stock. Starter and the two model-specific nameplate changeovers must remain separate.
Source: TI 10/1996, p. 1 — TS 350 / TS 360: 4.5 mm ElastoStart rope and accessory restrictions.
Part numbers (4)
- 1107 195 8200 — Original rope Ø4.5 x1000 mmretained for older machines/other models · TS 350, TS 360; TI10/1996 specified configuration
- 1122 190 2900 — New rope Ø4.5 mmlength unspecified · TS 350, TS 360; TI10/1996 specified configuration
- 0000 930 2200 — Original rope Ø4.5 mm x30.5 mspecial accessory; retained original supply · TS 350, TS 360; TI10/1996 specified configuration
- 0000 930 2268 — New rope Ø4.5 mm (28x)special accessory; literal28x · TS 350, TS 360; TI10/1996 specified configuration
Wrong number or missing part for the TS 350? Report a correction →