← Cut-off machines · series 4201

Stihl 4201 · Section E · 5 of 22 · 17 parts

Ignition system

Fits TS 350.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
11011121314233456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (17)

PosPart numberDescriptionQty
1 0000 989 0810 Grommet 1
2 4201 442 0400 Hose 1
3 0000 989 0815 Grommet 2
4 1108 400 0800 NLA Ignition module Fitment / change note → 1
4 1108 400 0804 Ignition module 1
5 0000 989 1010 Grommet 1
6 not sold separately Ignition lead 325 mm not available as a separate item 1
7 1108 440 1102 Short circuit wire 285 mm / 11.2'' 1
8 0751 030 8957 Terminal socket 4.8-1/0.8 no longer available from factory 1
9 0751 030 8492 NLA Terminal socket no longer available from factory 1
10 1110 442 7000 NLA Contact sleeve no longer available from factory 1
11 9022 313 0680 Spline screw IS-M4x16 2
12 9291 021 0100 Washer 4.3 2
13 1108 400 1205 Flywheel Fitment / change note → 1
14 9211 260 1340 Hexagon nut M10x1 1
Not numbered on the diagram — assemblies, kits and options
— 0000 405 0600 NLA Ignition lead 1 m option 1
— 0000 930 2251 Ignition lead 10 m option 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Historical fitment · TS 350 / TS 360

TS 350 / TS 360: series 4201 replacement ignition assignment

1108 400 0800 with flywheel 1108 400 1205; 325 mm ignition lead.

  • Printed series 4201. Use 1108 400 0800 with flywheel 1108 400 1205.
  • Printed ignition-lead length: 325 mm (12 13/16 in). Preserve both printed units.
  • TI01/1999 lists replacement combinations for the then-current machines, not every earlier configuration. Older machines are referred to Spare Parts for Previous Models in their own illustrated parts lists; no serial cutoff is supplied here.
  • Use only the listed ignition-module/flywheel combinations. The source warns that incorrect combinations can cause excessive RPM or running in reverse; sharing a module number does not make all flywheels interchangeable.
  • Universal replacement modules may differ from production modules in maker, shape and part number. The source describes installation/function compatibility within its assignments, not universal compatibility or a project hardware test.
  • Some replacement modules require shortening the ignition lead and/or short-circuit wire and crimping a different short-circuit connector. The table gives ignition-lead lengths only; it supplies neither a short-circuit-wire length nor a connector part number. Do not infer that every row needs modification.
  • Only the named models and printed series are covered. A shared IPL sheet does not extend this assignment to unnamed models or modern MS equivalents. This 1999 USA bulletin is historical guidance, not current availability.

Source: TI 1/1999, p. 1 · TI 1/1999, p. 3 — 1.1 general restrictions and 1.2.2 power-tool assignments.

Part numbers (2)
  • 1108 400 0800 — Replacement ignition moduleAssigned component · TS 350 / TS 360, printed series 4201, listed combination only
  • 1108 400 1205 — Assigned flywheelRequired pairing · TS 350 / TS 360, printed series 4201

Wrong number or missing part for the TS 350? Report a correction →