Stihl 4201 · Section G · 7 of 22 · 47 parts
Carburetor HL-372A
Fits TS 350.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (47)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1106 121 5400 | Valve jet | 1 |
| 2 | 1106 120 8801 | Inlet needle valve | 1 |
| 3 | 6503 129 2500 | Gasket | 1 |
| 4 | 1106 122 3005 | Spring | 1 |
| 5 | 1106 121 5000 | Inlet control lever | 1 |
| 6 | 1106 121 9200 | Spindle | 1 |
| 7 | 1110 122 7800 | Oval head screw | 1 |
| 8 | 6503 122 9410 | Plug | 1 |
| 9 | 6503 129 0910 | Gasket | 1 |
| 10 | 6503 121 4700 | Metering diaphragm | 1 |
| 11 | 6503 121 0500 | Pump housing | 1 |
| 12 | 1108 129 1100 | Gasket | 1 |
| 13 | 1106 121 4803 | Pump diaphragm | 1 |
| 14 | 6503 121 0400 | Top | 1 |
| 15 | 6503 122 7710 | Oval head screw | 6 |
| 16 | 6503 121 7810 | Strainer | 1 |
| 17 | 6503 129 3010 | Sealing ring | 1 |
| 18 | 4201 121 0802 | End cover | 1 |
| 19 | 6503 121 0800 | End cover | 1 |
| 20 | 6503 122 7700 | Oval head screw | 1 |
| 21 | 6503 122 9300 | Clip | 2 |
| 22 | 6503 122 7720 | Oval head screw | 2 |
| 23 | 1108 120 7010 | Throttle lever | 1 |
| 24 | 1106 122 7201 | Pan head screw | 2 |
| 25 | 4201 121 3310 | Throttle shutter | 1 |
| 26 | 1106 122 7400 | Round head screw | 2 |
| 27 | 9795 003 0350 | Threaded insert M5x7.5 | 2 |
| 29 | 6503 121 2910 | Choke shutter | 1 |
| 30 | 6503 122 3020 | Spring | 1 |
| 31 | 4201 122 6200 | Idle speed adjustment screw | 1 |
| 32 | 1110 129 3000 | Sealing ring | 1 |
| 33 | 4201 120 8705 | Control valve | 1 |
| 34 | 1106 129 3500 | Sealing ring | 2 |
| 35 | 1106 129 2300 | Gasket | 2 |
| 36 | 1106 122 3000 | Spring | 2 |
| 37 | 1106 129 3505 | Sealing ring | 2 |
| 38 | 1108 122 6800 | Low speed adjustment screw | 2 |
| 39 | 1108 122 6700 | High speed adjustment screw | 1 |
| 40 | 1108 122 3210 | Torsion spring | 1 |
| 41 | 1108 120 7100 | Throttle shaft with lever | 1 |
| 42 | 1108 121 3000 | Choke shaft | 1 |
| 43 | 1108 122 3201 | Torsion spring | 1 |
| 44 | 1108 120 7000 | Governor lever | 1 |
| 45 | 6503 122 8710 | Spring washer | 2 |
| 46 | 6503 122 8000 | Stud | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 4201 120 0611 | Carburetor HL-372A | 1 |
| — | 4201 007 1060 | Set of carburetor parts | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · TS 350
TS 350: discontinued ZAMA LA S6 A replaced by Tillotson
Complete ZAMA carburetor supply ends; its component spares remain available.
- TS 350 alternative-production ZAMA LA S6 A 4201 120 0602 is no longer installed or factory-supplied complete. Only Tillotson 4201 120 0604 is now installed on the production line and supplied as replacement for this model. Do not swap the separate TS 350 and TS 360 replacement numbers.
- Component parts of the ZAMA carburetors REMAIN available as spares. The prose says installation stopped some time ago, while the summary says in progress; no numeric introduction cutoff is provided. The bulletin points to the parts list for the equivalent Tillotson and supplies no tuning or internal-parts interchange procedure. Canonical sheet names do not establish the precise Tillotson variant suffix used in 1994.
- Historical TI09/1994 guidance for the named TS 350 / TS 360 models only; no successor or TS 350 AVE applicability inferred from a shared IPL sheet. Across-flats dimensions describe wrench sizes, not thread diameters. Factory stock statements are historical, not current availability. MOQ columns are commercial order quantities. No physical interchange test was performed.
Source: TI 9/1994, p. 6 — TS 350: discontinued ZAMA LA S6 A replaced by Tillotson.
Part numbers (2)
- 4201 120 0602 — ZAMA LA S6 A complete carburetororiginal; no longer supplied · TS 350: discontinued ZAMA LA S6 A replaced by Tillotson
- 4201 120 0604 — Tillotson replacement carburetormodel-specific replacement · TS 350: discontinued ZAMA LA S6 A replaced by Tillotson
Wrong number or missing part for the TS 350? Report a correction →