Stihl 4201 · Section T · 19 of 22 · 10 parts
Tools
Fits TS 350.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (10)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4128 890 3400 | Combination wrench | 1 |
| 2 | 5910 890 2305 | Screwdriver Fitment / change note → | 1 |
| 3 | 4130 893 7800 | Locking pin Fitment / change note → | 1 |
| 4 | 0000 891 0801 NLA | Tool roll Fitment / change note → | 1 |
| 5 | 1111 890 3400 | Combination wrench Fitment / change note → | 1 |
| 6 | 0811 012 1152 | Wrench 8x10 Fitment / change note → | 1 |
| 7 | 0812 032 1016 | Wrench SW 13 Fitment / change note → | 1 |
| 8 | 0812 370 1000 | Screwdriver T27x120x70 | 1 |
| 9 | 0812 260 1008 | Allen key 5 | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 4223 890 1400 | Tool kit | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · TS 350 / TS 360
TS 350 / TS 360: standardized 19 mm tool kit
4221 890 1400 replaces 4201 890 1401; original individual tools remain available for older machines.
X 28 322 498 — Introduction of this specific modification on the named models; not a production range or interchange guarantee.
- From X 28 322 498, kit 4221 890 1400 replaces kit 4201 890 1401 for standardization and 19 mm-head screws. Original complete kit is no longer factory-available, but original combination wrench 1111 890 3400, wrench 8x10 0811 012 1152, screwdriver 0812 370 1145 and wrench 13 0812 032 1016 remain available for older machines.
- New kit uses combination wrench 4119 890 3400 (key 1), unchanged screwdriver 5910 890 2305 (2), new stop pin 4130 893 7800 (3) and unchanged tool roll 0000 891 0801. The drawing identifies these three tools; no stop-pin application procedure or unrestricted cross-model use is supplied. This kit cutoff is distinct from the muffler, machine support and TS360 filter changes.
- Historical TI09/1994 guidance for the named TS 350 / TS 360 models only; no successor or TS 350 AVE applicability inferred from a shared IPL sheet. Across-flats dimensions describe wrench sizes, not thread diameters. Factory stock statements are historical, not current availability. MOQ columns are commercial order quantities. No physical interchange test was performed.
Source: TI 9/1994, p. 4 · TI 9/1994, p. 5 — TS 350 / TS 360: standardized 19 mm tool kit.
Part numbers (10)
- 4201 890 1401 — Complete tool kitoriginal; no longer supplied · TS 350 / TS 360: standardized 19 mm tool kit
- 4221 890 1400 — Complete tool kitnew version · TS 350 / TS 360: standardized 19 mm tool kit
- 1111 890 3400 — Combination wrenchoriginal; retained for older machines · TS 350 / TS 360: standardized 19 mm tool kit
- 4119 890 3400 — Combination wrench, key 1new version · TS 350 / TS 360: standardized 19 mm tool kit
- 0811 012 1152 — 8x10 wrenchdeleted from kit; retained spare · TS 350 / TS 360: standardized 19 mm tool kit
- 0812 370 1145 — Screwdriverdeleted from kit; retained spare · TS 350 / TS 360: standardized 19 mm tool kit
- 5910 890 2305 — Screwdriver, key 2unchanged · TS 350 / TS 360: standardized 19 mm tool kit
- 0812 032 1016 — 13 mm wrenchdeleted from kit; retained spare · TS 350 / TS 360: standardized 19 mm tool kit
- 4130 893 7800 — Stop pin, key 3new tool · TS 350 / TS 360: standardized 19 mm tool kit
- 0000 891 0801 — Tool rollunchanged · TS 350 / TS 360: standardized 19 mm tool kit
Wrong number or missing part for the TS 350? Report a correction →