← Cut-off machines · series 4201

Stihl 4201 · Section U · 19 of 24 · 28 parts

Stop depth wheel, Cart for cutquik

Fits TS 510, TS 760.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110111213141415151617181922021212223242526334456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (28)

PosPart numberDescriptionQty
1 4201 712 1005 Wheel Ø 142 mm option 1
2 4201 710 3000 Wheel option 1
3 0000 988 1900 Felt ring option 2
4 4201 717 2001 Cap option 2
5 9455 621 2150 Circlip 20x1.2 option 1
6 4201 711 8500 Stud option 1
7 4201 711 8501 Stud option 1
8 4201 711 0700 Swivel arm Fitment / change note → option 1
9 9291 021 0180 Washer 8.4 option 1
10 9582 003 0471 Clamp lever M8 option 1
11 9220 260 1100 Hexagon nut M8 option 1
12 4201 711 0901 Axle option 1
13 4201 180 0700 Control lever option 1
14 9008 319 1780 Hexagon head screw M8x16 option 2
15 4201 790 9300 Rubber insert option 2
16 9291 021 0180 Washer 8.4 option 1
17 9123 319 1900 Stud M8x40 option 2
18 9210 260 1100 Hexagon nut M8 option 2
19 9131 216 1780 Grub screw M8x16 option 1
20 4201 180 1100 Throttle cable option 1
21 4308 182 8800 Terminal sleeve option 2
22 9793 003 0030 Grease nipple D option 1
23 0000 997 0427 Compression spring option 1
24 0000 937 3000 Screw nipple option 1
25 4201 180 1800 Throttle control option 1
26 4201 180 2200 Rubber strap option 1
Not numbered on the diagram — assemblies, kits and options
— 4201 007 1041 NLA Depth wheel kit Fitment / change note → option 1
— 4205 007 1008 Mounting kit Cutquik cart option 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Historical fitment · TS 510 / TS 760

TS 510 / TS 760: longer cutting-depth limiter swivel arm

The new cart limiter supports 300, 350 and 400 mm wheels; the old one does not support 400 mm.

Later reviewed guidance: TS 760: 400 mm wheels are factory-version only

  • Section 6.2 replaces cutting-depth limiter assembly 4201 007 1026 with 4201 007 1041, including swivel arm item 11. The new longer arm has a greater swivel angle and permits use on the cut-off machine cart with 300, 350 and 400 mm cutting wheels. The original assembly is suitable ONLY for 300 and 350 mm wheels and remains available until stocks are exhausted.
  • Swivel arm number 4201 711 0700 is UNCHANGED; factory replacements are supplied only in the modified longer version with larger swivel angle. Drawing 328TI017 compares original above and modified below and marks the new arm’s illustrated dimension as 165 mm (6 1/2 in.). This is not a cutting-depth specification or a measured old-arm dimension.
  • Later exact sheet U lists kit 4201 007 1041 (no longer available in that edition) and swivel arm 4201 711 0700. Same number on an existing arm does not identify its physical revision. This cart-accessory permission does not remove the complete 400 mm attachment, guard and engine-limiter conditions of section 6.1.
  • Historical TI26/1996 sections 5–7, applied here to TS 510 and TS 760 only. Shared catalog sheets do not establish unrestricted interchange. Supply statements describe 1996, not current stock. No hardware operation was performed.

Source: TI 26/1996, p. 1 · TI 26/1996, p. 12 · TI 26/1996, p. 13 — TS 510 / TS 760: longer cutting-depth limiter swivel arm.

Part numbers (3)
  • 4201 007 1026 — Original cutting-depth limiter300/350 mm only; stock exhaustion · TS 510 / TS 760; TS 510 / TS 760: longer cutting-depth limiter swivel arm
  • 4201 007 1041 — New cutting-depth limiter300/350/400 mm cart use · TS 510 / TS 760; TS 510 / TS 760: longer cutting-depth limiter swivel arm
  • 4201 711 0700 — Swivel armSame number; longer modified-only replacement · TS 510 / TS 760; TS 510 / TS 760: longer cutting-depth limiter swivel arm

Wrong number or missing part for the TS 510, TS 760? Report a correction →