← Blowers & other equipment · series 4203

Stihl 4203 · Section G · 7 of 12 · 17 parts

Container

Fits SR 320, SR 400.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131415234567889
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (17)

PosPart numberDescriptionQty
1 4203 700 0800 Container Fitment / change note → 1
1 4203 700 0802 Container 1
2 4203 700 0902 Container cap Fitment / change note → 1
3 4203 709 2002 Sealing ring 1
4 4203 350 8000 Reducer 1
5 9645 945 7700 O-ring 23.4x3.53 1
6 not sold separately Hose 330 mm / 13'' 1
7 4203 700 8810 Strainer Fitment / change note → 1
8 4203 703 5700 Vent insert 1
9 9645 945 8971 O-ring 120x5 1
10 9771 021 2640 Hose clip 38x12 1
11 4203 701 6200 Bellows 1
12 9771 021 2600 Hose clip 34x12 1
13 4203 700 8802 Strainer Fitment / change note → 1
14 4227 791 7900 Bushing 1
15 9516 987 2010 Ball Ø 5 mm 1
Not numbered on the diagram — assemblies, kits and options
— 4202 708 9502 Hose 10x2x830 mm 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Historical fitment · SR 320 / SR 400

SR 320 / 400 only: container caps, pump-kit cap and larger strainer

Two cap replacements differ from retained old strainer supply; container and kit numbers stay unchanged.

  • This section explicitly applies to SR 320 AND SR 400 ONLY. Container 4203 700 0800 includes filler cap 4203 700 0900 → 4203 700 0902, which includes sealing ring 4203 709 2000. The container and ring numbers are unchanged.
  • The original scan recovers corrupted extracted row 4 as PRESSURE PUMP MOUNTING KIT 4203 007 1016, unchanged in both columns. It includes cap 4203 700 0901 → 4203 700 0903, which also includes sealing ring 4203 709 2000. Only the modified kit is factory-supplied; BOTH original cap versions are no longer available from factory.
  • Strainer 4203 700 8802 → 4203 700 8810 has increased capacity to simplify refilling; no volume or throughput is given. Figure 352TI002 KN labels LEFT original and RIGHT new. The original strainer REMAINS AVAILABLE FOR OLDER MACHINES, unlike the original caps.
  • Current SR catalog uses sealing ring 4203 709 2002 and ULV pump kit 4203 007 1029. Those edition/configuration differences are not silently substituted for TI ring 2000 or kit 1016; no supersession chain or universal kit equivalence is established.
  • Historical TI 14/1996 evidence, not current stock or a verified physical interchange claim. Introduction is in progress; no numeric serial boundary is given. Shared IPL sheets do not extend this note to BR 320 L or later models. No hardware operation was performed.

Source: TI 14/1996, p. 2 — SR 320 / 400 only: container caps, pump-kit cap and larger strainer.

Part numbers (9)
  • 4203 700 0800 — Container, unchanged numberTI14/1996 listed configuration · Only the note’s stated models and configuration
  • 4203 700 0900 — Original standard capTI14/1996 listed configuration · Only the note’s stated models and configuration
  • 4203 700 0902 — New standard capTI14/1996 listed configuration · Only the note’s stated models and configuration
  • 4203 709 2000 — Sealing ring, TI unchanged numberTI14/1996 listed configuration · Only the note’s stated models and configuration
  • 4203 007 1016 — Pressure pump mounting kit, modified version onlyTI14/1996 listed configuration · Only the note’s stated models and configuration
  • 4203 700 0901 — Original pump-kit capTI14/1996 listed configuration · Only the note’s stated models and configuration
  • 4203 700 0903 — New pump-kit capTI14/1996 listed configuration · Only the note’s stated models and configuration
  • 4203 700 8802 — Original strainer, still supplied for older machinesTI14/1996 listed configuration · Only the note’s stated models and configuration
  • 4203 700 8810 — New larger-capacity strainerTI14/1996 listed configuration · Only the note’s stated models and configuration

Wrong number or missing part for the SR 320, SR 400? Report a correction →